Fujifilm Camera X100t Owners Manual
Have a look at the manual Fujifilm Camera X100t Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 17 Fujifilm manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 256
To print the print order created with [PRINT ORDER (DPOF)] in the playback menu.
In the PictBridge display, press [DISP/BACK] to open the PictBridge menu.
1.
Press the selector up or down to highlight [PRINT DPOF].2.
Press [MENU/OK] to display a confirmation dialog.3.
Press [MENU/OK] to start printing.4.
Printing Pictures via USB
002D0020 0032003500360020 002D](http://img.usermanuals.tech/thumb/2029/49512/w64_fujifilm-camera-x100t-owners-manual-255.png "Page 256
To print the print order created with [PRINT ORDER (DPOF)] in the playback menu.
In the PictBridge display, press [DISP/BACK] to open the PictBridge menu.
1.
Press the selector up or down to highlight [PRINT DPOF].2.
Press [MENU/OK] to display a confirmation dialog.3.
Press [MENU/OK] to start printing.4.
Printing Pictures via USB
002D0020 0032003500360020 002D")
![Page 257
During Printing
A message is displayed during printing. Press [DISP/BACK] to cancel before all pictures
are printed (depending on the printer, printing may end before the current picture has
printed). If printing is interrupted, turn the camera off and then on again.
Disconnecting the Camera
Confirm that the above message is not displaye d and turn the camera off. Disconnect the
USB cable.
Pictures can be printed from internal memory or a memory card that has been
formatted in the camera.
When pictures...](http://img.usermanuals.tech/thumb/2029/49512/w64_fujifilm-camera-x100t-owners-manual-256.png "Page 257
During Printing
A message is displayed during printing. Press [DISP/BACK] to cancel before all pictures
are printed (depending on the printer, printing may end before the current picture has
printed). If printing is interrupted, turn the camera off and then on again.
Disconnecting the Camera
Confirm that the above message is not displaye d and turn the camera off. Disconnect the
USB cable.
Pictures can be printed from internal memory or a memory card that has been
formatted in the camera.
When pictures...")
![Page 263
Third-Party Remote Releases
Electronic releases from third-party suppliers can be connected via the microphone/remote
release connector.
A confirmation dialog will be displayed when a third-party release is connected;
press [MENU/OK] and select [REMOTE] for [MIC/REMOTE RELEASE] .
For more information, visit the website of the country or region of purchase (the new window
will open).
Check the website »
Remote Releases
002D0020 0032003600330020 002D](http://img.usermanuals.tech/thumb/2029/49512/w64_fujifilm-camera-x100t-owners-manual-262.png "Page 263
Third-Party Remote Releases
Electronic releases from third-party suppliers can be connected via the microphone/remote
release connector.
A confirmation dialog will be displayed when a third-party release is connected;
press [MENU/OK] and select [REMOTE] for [MIC/REMOTE RELEASE] .
For more information, visit the website of the country or region of purchase (the new window
will open).
Check the website »
Remote Releases
002D0020 0032003600330020 002D")
NP-95 BC-65N Rechargeable Li-ion batteries Battery chargers NP-95 Additional large-capacity NP-95 rechargeable batteries can be purchased as required. BC-65N Replacement battery char gers can be purchased as required. At +20 °C/+68 °F, the BC-65N charges an NP-95 in about 240 minutes. For more information, visit the website of the country or region of purchase (the new window will open). Check the website » Power Supplies 002D0020 0032003600310020 002D
RR-90 Remote Releases RR-90 Use to reduce camera shake or keep the shutter open during a time exposure. An optional RR-90 remote release can be used for long time-exposures. Remote Releases 002D0020 0032003600320020 002D
Third-Party Remote Releases Electronic releases from third-party suppliers can be connected via the microphone/remote release connector. A confirmation dialog will be displayed when a third-party release is connected; press [MENU/OK] and select [REMOTE] for [MIC/REMOTE RELEASE] . For more information, visit the website of the country or region of purchase (the new window will open). Check the website » Remote Releases 002D0020 0032003600330020 002D
TCL-X100 WCL-X100 Tele Conversion Lens Wide Conversion Lens When attached to the X100T, the TCL-X100 increases the focal length by approximately 1.4× to 33 mm (equivalent to 50 mm in 35 mm format). When attached to the X100T, the WCL-X100 increases the angle of view for wider-angle shots. For more information, visit the website of the country or region of purchase (the new window will open). Check the website » Conversion Lens 002D0020 0032003600340020 002D
MIC-ST1 MIC-ST1 An external microphone for movie recording. For more information, visit the website of the country or region of purchase (the new window will open). Check the website » Stereo microphones 002D0020 0032003600350020 002D
Adapter rings Lens hoods Protector filters Leather cases Hand Grip Grip Belt Other 002D0020 0032003600360020 002D
AR-X100An aluminum adapter ring exclusively for use with the X100T/X100S/X100. It is used when attaching the LH-X100 lens hood or φ49 mm filters available from third-party suppliers. Attaching Adapter Rings Remove the front ring. If you have trouble removing the front ring, grip the entire ring and rotate it as shown. 1. Other 002D0020 0032003600370020 002D
Attach the adapter ring as shown, with the projections facing out.2. Keep the front ring and lens cap in a safe place when not in use. Attach the adapter ring before attaching LH-X100 lens hood, PRF-49S protector filter, or third-party filters. Other 002D0020 0032003600380020 002D
LH-X100This aluminum lens hood, exclusively for use with the X100T/X100S/X100, comes with an AR-X100 adapter ring made of the same material. The adapter ring is required when attaching the hood. Attach the adapter ring before attaching the lens hood. Align the indentations and rotate as shown. Other 002D0020 0032003600390020 002D
PRF-49S LC-X100S MHG-X100 GB-001A protective filter exclusively for use with the X100T/X100S/X100. Attach the adapter ring be fore attaching the filter. Requires AR-X100 adapter ring. This leather case, exclusively for us e with the X100T/X100S/X100, combines practicality with the luxury of leather and comes with a shoulder strap made of the same material. Pictures can be taken and batteries and memory cards inserted or removed with the camera still in its case. To increase the cameras grip. Bo th battery and memory card can be swapped with the grip in place. Addi tionally, a tripod screw hole can be placed in centre of the optical axis and the base parts are equipped with a 38mm width dovetail protrusion plate, allowing use as a quick shoe mount when using a dovetail gr oove tripod pedestal. GB-001 enhances the cameras hold, allowing users to carry the camera firmly with just one hand. For more information, visit the website of the country or region of purchase (the new window will open). Check the website » Other 002D0020 0032003700300020 002D