Fujifilm Camera X100t Owners Manual

							Use the selector to highlight items.
The [Q] button can not be used to adjust custom white balance, choose a color
temperature, or adjust settings for auto ISO sensitivity. These settings can be
adjusted using a function button or from the menus.
2. 
Rotate the command dial to change the highlighted item.3. 
Press  [Q] to exit when settings are complete.4. 
For quick access to custom settings banks, press and hold the  [Q] button while the
quick menu is displayed.
See Also
[EDIT/SAVE QUICK MENU]  (The Setup Menu)
Using the [Q] Button
002D0020 003900310020 002D  
						

							The Function Buttons
[Fn] (Function) Buttons
002D0020 003900320020 002D  
						

							Each of the function buttons can be assigned any one of the roles listed below. Options for the
selected item can then be displayed by pressing  the button. To choose the roles played by the
function buttons, press the [DISP/BACK] button until function settings options are displayed,
then highlight the desired butto n and press the selector right.
[ADVANCED FILTER]
[MULTIPLE EXPOSURE]
[MACRO]
[PREVIEW DEPTH OF FIELD]
[ISO]
[SELF-TIMER]
[IMAGE SIZE]
[IMAGE QUALITY]
[DYNAMIC RANGE]
[FILM SIMULATION]
[WHITE BALANCE]
[ND FILTER]
[PHOTOMETRY]
[AF MODE]
[FOCUS AREA]
[CORRECTED AF FRAME]
[FLASH MODE]
[FLASH COMPENSATION]
[SELECT CUSTOM SETTING]
[MOVIE]
[FACE DETECTION]
[PREVIEW PIC. EFFECT]
[HIGH PERFORMANCE]
[RAW]
[WIRELESS COMMUNICATION]
[CONVERSION LENS]
[SHUTTER TYPE]
The Function Buttons
002D0020 003900330020 002D  
						

							You can also use the [FUNCTION (Fn) SETTING]  option in the shooting menu to
choose the roles played by the function buttons.
You can also display options for any of the function buttons by pressing and holding the
button.
See Also
[FUNCTION (Fn) SETTING]  (The Shooting Menu)
The Function Buttons
002D0020 003900340020 002D  
						

							Bracketing
Continuous Shooting (Burst Mode)
Multiple Exposures
Panoramas
Macro Mode (Close-ups)
Using the Self-Timer
Interval Timer Photography
Using the Flash
Focus-Frame Selection
Exposure Compensation
Focus/Exposure Lock
Focus Mode
Manual Focus (Focus Mode M)
Metering
Recording Pictures in RAW Format
Long Time-Exposures (T/B)
Film Simulation
White Balance
Advanced Filters
More on Photography
002D0020 003900350020 002D  
						

							Automatically vary settings over a series of pictures. Bracketing options can be displayed by
pressing the  [DRIVE] button.
 [AE BKT]
 [ISO BKT]
 [FILM SIMULATION BKT]
 [WHITE BALANCE BKT]
 [DYNAMIC RANGE BKT]
Bracketing
002D0020 003900360020 002D  
						

							Press the selector left or right to highlight a bracketing amount. Each time the shutter button is
pressed, the camera will take three shots:  one using the metered value for exposure, the
second overexposed by the selected amount, an d the third underexposed by the same amount.
The camera may not be able to use the selected bracketing increment if the amount of
over- or under- exposure exceeds the limits of the exposure metering system.
Press the selector left or right to highlight a  bracketing amount. Each time the shutter-release
button is pressed, the camera will take a pict ure at the current sensitivity and process it to
create two additional copies, one with the sensit ivity raised and the other with the sensitivity
lowered by the selected amount.
This option can not be used if  [RAW] is selected for  [IMAGE QUALITY] .
Each time the shutter is released, the camera takes one shot and processes it to create copies
with the film simulation settings selected for  [FILM SIMULATION BKT] in the shooting menu.
This option can not be used if  [RAW] is selected for  [IMAGE QUALITY] .
See Also
[FILM SIMULATION BKT]  (The Shooting Menu)
Bracketing
002D0020 003900370020 002D  
						

							Press the selector left or right to highlight a bracketing amount. Each time the shutter button is
pressed, the camera takes three shots: one at the current wh ite balanced setting, one with
fine-tuning increased by the selected amount,  and another with fine-tuning decreased by the
selected amount.
This option can not be used if  [RAW] is selected for  [IMAGE QUALITY] .
Each time the shutter button is pressed, the  camera takes three shots at different dynamic
range settings: 100% for the first, 200% for the second, and 400% for the third.
Sensitivity is restricted to a minimum of IS O 800; the sensitivity previously in effect is
restored when bracketing ends.
This option can not be used if  [RAW] is selected for  [IMAGE QUALITY] .
Bracketing
002D0020 003900380020 002D  
						

							Capture motion in a series of pictures. Burst shooting options can be displayed by pressing the
[DRIVE] button.
Press the selector left or right to choose a frame rate. The camera takes photographs while the
shutter button is pressed.
Focus and Exposure
To vary focus and exposure with  each shot, select focus mode [C]; in other modes, focus
and exposure are determined by the first shot in each series.
Focus tracking performance varies with aperture, sensitivity, and shooting
conditions.
Continuous Shooting (Burst Mode)
002D0020 003900390020 002D  
						

							Create a photograph that combines two exposures.
Press the  [DRIVE] button to display drive options.
1. 
Highlight  [MULTIPLE EXPOSURE]  and press [MENU/OK]  to select the highlighted
option and return to shooting mode.2. 
Multiple Exposures
002D0020 0031003000300020 002D