Epson X410 Manual

							Output resolution
50 to 4800, 7200, and 9600 dpi
(50 to 4800 dpi in 1 dpi increments)
Image data 16 bits per pixel per color internal
8 bits per pixel per color external (maximum)
Light source LED
Parent topic: Technical Specifications
Paper Specifications Note:Since the quality of any particular brand or type of paper may be changed by the manufacturer at
any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. Always test a
sample of paper stock before purchasing large quantities or printing large jobs.
Single-sheets
Size A4 (8.3 × 11.7 inches [210 × 297 mm])
A6 (4.1 × 5.8 inches [105 × 148 mm])
Letter (8.5 × 11 inches [216 × 279 mm])
Legal (8.5 × 14 inches [216 × 357 mm])
3.5 × 5 inches (89 × 127 mm)
4 × 6 inches (102 × 152 mm)
5 × 7 inches (127 × 178 mm)
5 × 8 inches (127 × 203 mm)
8 × 10 inches (203 × 254 mm)
16:9 wide (4 × 7.1 inches [102 × 181 mm])
Half Letter (5.5 × 8.5 inches [140 × 279 mm])
Paper types Plain paper and special paper distributed by Epson
Thickness 0.003 in (0.08 mm) to 0.004 in (0.11 mm)
Weight 17 lb (64 g/m2
) to 24 lb (90 g/m 2
)
221 
						

							Envelopes
Size No. 10 (4.1 × 9.5 inches [105 × 241 mm])
Paper types Plain paper
Weight 20 lb (75 g/m2
) to 24 lb (90 g/m 2
)
Parent topic: Technical Specifications
Printable Area Specifications Note:When printing borderless, quality may decline in the expanded printable area.
Single sheets
1 Top: 0.12 inch (3 mm) minimum
2 Left: 0.12 inch (3 mm) minimum
3 Right: 0.12 inch (3 mm) minimum
4 Bottom: 0.12 inch (3 mm) minimum
222 
						

							Envelopes
1 Left: 0.12 inch (3 mm) minimum
2 Bottom: 0.20 inch (5 mm) minimum
3 Top: 0.20 inch (5 mm) minimum
4 Right: 0.78 inch (20 mm) minimum
Parent topic: Technical Specifications
Ink Cartridge Specifications Note:We recommend that you use genuine Epson cartridges and do not refill them. The use of other
products may affect your print quality and could result in printer damage.
The cartridges included with the printer are designed for printer setup and not for resale. After some ink
is used for priming, the rest is available for printing. Yields vary considerably based on images printed,
print settings, paper type, frequency of use, and temperature. For print quality, a variable amount of ink
remains in the cartridge after the replace cartridge indicator comes on.
Color Black, Cyan, Magenta, Yellow
Cartridge life Opened package: 6 months
Unopened package: do not use if the date on the package has
expired
223 
						

							Temperature
Storage: –4 to 104 ºF (–20 to 40 ºC)
1 month at 104 ºF (40 ºC)
Ink freezes at 10.4 ºF (–12 ºC)
Ink thaws and is usable after 3 hours at 77 ºF (25 ºC)
Note: For best printing results, use up a cartridge within 6 months of opening the package.
Parent topic: Technical Specifications
Memory Card Specifications Note:Cards marked with an asterisk (*) require an adapter; consult your adapter documentation for
details on using it.
Compatible types Memory Stick Duo
Memory Stick PRO Duo
Memory Stick PRO-HG Duo
Memory Stick Micro*
MagicGate Memory Stick Duo
SDXC
SDHC
SD
miniSDHC*
miniSD*
microSDXC
microSDHC*
microSD*
Media format DCF DCF (Design rule for Camera File system) version 1.0 or 2.0
compliant
224 
						

							Voltage requirements
3.3 V
Maximum current: 450 mA
Note: All card types are standard version compliant.
Parent topic: Technical Specifications
Dimension Specifications Height Stored: 5.7 inches (145 mm)
Printing: 11.0 inches (279 mm)
Width Stored: 15.4 inches (390 mm)
Printing: 15.4 inches (390 mm)
Depth Stored: 11.8 inches (300 mm)
Printing: 20.8 inches (528 mm)
Weight 9.5 lb (4.3 kg)
(without ink cartridges)
Parent topic: Technical Specifications
Electrical Specifications Power supply rating 100 to 240 V
Input voltage range 90 to 264 V
Rated frequency range 50/60 Hz
Input frequency range 49.5/60.5 Hz
Rated current 0.5 to 0.3 A
Power consumption Standalone copying: 13 W (ISO/IEC 24712)
(100 to 240 V model) Ready mode: 6.5 W
Sleep mode: 2.7 W
Power off mode: 0.3 W
225 
						

							Parent topic:
Technical Specifications
Environmental Specifications Temperature Operating: 50 to 95 ºF (10 to 35ºC)
Storage: –4 to 104 ºF (–20 to 40 ºC)
1 month at 104 ºF (40 ºC)
Humidity Operating: 20 to 80% RH
(non-condensing) Storage: 5 to 85% RH
Parent topic: Technical Specifications
Interface Specifications Interface type Hi-Speed USB (Device class for computers)
Parent topic: Technical Specifications
Network Interface Specifications Wireless LAN standard IEEE 802.11 b/g/n
Wireless security WPA-PSK (TKIP/AES); WPA2 compliant with support for
WPA/WPA2 Personal
WEP (64/128 bit)
Frequency band 2.4 GHz
Communication mode Infrastructure mode
Ad hoc mode
Wi-Fi Direct
Note: Wireless LAN standard complies with either IEEE 802.11 b/g or IEEE 802.11 b/g/n, depending on
purchase location.
Parent topic: Technical Specifications
226 
						

							Safety and Approvals Specifications
United States Safety: UL60950-1
EMC: FCC part 15 Subpart B class B
Canada Safety: CAN/CSA C22.2 No. 60950-1
EMC: CAN/CSA-CEI/IEC CISPR 22 Class B
This equipment contains the following wireless module:
• Manufacturer: Askey Computer Corporation
• Type: WLU6117-D69 (RoHS)
This product conforms to Part 15 of FCC Rules and RSS-210 of the IC Rules. Epson cannot accept
responsibility for any failure to satisfy the protection requirements resulting from a non-recommended
modification of the product. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing.
Parent topic: Technical Specifications
227 
						

							Notices
Check these sections for important notices about your product.
Note:Epson offers a recycling program for end of life products. Please go to www.epson.com/recyclefor
information on how to return your products for proper disposal.
Important Safety Instructions
FCC Compliance Statement
Software Notice
Trademarks
Copyright Notice
Important Safety Instructions Before using your Epson product, read and follow these safety instructions.
General Product Safety Instructions
Ink Cartridge Safety Instructions
LCD Screen Safety Instructions
Wireless Connection Safety Instructions
Parent topic:Notices
General Product Safety Instructions • Be sure to follow all warnings and instructions marked on the product.
• Use only the type of power source indicated on the products label.
• Use only the power cord that comes with the product. Use of another cord may cause fires or shock.Do not use the cord with any other equipment.
• Place the product near a wall outlet where the plug can be easily unplugged.
• Avoid plugging the product into an outlet on the same circuit as a photo copier or air control system that regularly switches on and off, or on an outlet controlled by a wall switch or timer.
• Do not let the power cord become damaged or frayed. Place it to avoid abrasions, cuts, fraying, crimping, and kinking. Do not place objects on top of it and do not allow it to be stepped on or run over.
Be careful to keep the cord straight at each end.
228 
						

							• If you use an extension cord with the product, make sure the total ampere rating of the devices
plugged into the extension cord does not exceed the cords ampere rating. Also, make sure the total
ampere rating of all devices plugged into the wall outlet does not exceed the wall outlets ampere
rating.
• Always turn off the product using the power button, and wait until the power light stops flashing before unplugging the product or cutting off power to the electrical outlet.
• If you will not be using the product for a long period, unplug the power cord from the electrical outlet.
• Place the product on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted or at an angle.
• Make sure the back of the product is at least 4 inches (10 cm) away from the wall.
• Allow space behind the product for the cables, and space above the product so that you can fully raise the document cover.
• Leave enough space in front of the product for the paper to be fully ejected.
• Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust.
• Do not place or store the product outdoors.
• Do not place the product near excessive heat sources or in direct sunlight.
• Leave enough room around the product for sufficient ventilation. Do not block or cover openings in the case or insert objects through the slots.
• Keep the product away from potential sources of electromagnetic interference, such as loudspeakers or the base units of cordless telephones.
• When connecting the product to a computer or other device with a cable, ensure the correct orientation of the connectors. Each connector has only one correct orientation. Inserting a connector
in the wrong orientation may damage both devices connected by the cable.
• Do not touch the flat white cable inside the product.
• Do not move the print head by hand; this may damage the product.
• Do not spill liquid on the product or use the product with wet hands.
• Do not use aerosol products that contain flammable gases inside or around the product. Doing so may cause fire.
• Do not press too hard on the document table when placing originals.
• Do not open the scanner section while the product is copying, printing, scanning, or performing any other functions.
• Be careful not to trap your fingers when closing the document cover or scanner.
229 
						

							• Except as specifically explained in your documentation, do not attempt to service the product yourself.
• Unplug the product and refer servicing to qualified service personnel under the following conditions: if
the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped
or the case damaged; if the product does not operate normally or exhibits a distinct change in
performance. Adjust only those controls that are covered by the operating instructions.
• Leave the ink cartridges installed. Removing the cartridges can dehydrate the print head and may prevent the product from printing.
• Before transporting the product, make sure that the print head is in the home (far right) position and the ink cartridges are in place.
• When storing or transporting the product, do not tilt it, stand it on its side, or turn it upside down; otherwise ink may leak.
Parent topic: Important Safety Instructions
Ink Cartridge Safety Instructions • Keep ink cartridges out of the reach of children and do not drink the ink.
• Be careful when you handle used ink cartridges; there may be ink remaining around the ink supplyport. If ink gets on your skin, wash it off with soap and water. If it gets in your eyes, flush them
immediately with water.
• Do not put your hand inside the product or touch any cartridges during printing.
• Install a new ink cartridge immediately after removing an expended one. Leaving cartridges uninstalled can dry out the print head and may prevent the product from printing.
• Do not remove or tear the label on the cartridge; this can cause leakage.
• Do not remove the transparent seal from the bottom of the cartridge. This may cause the cartridge to become unusable.
• Do not break the hooks on the side of the cartridge when removing it from the packaging.
• Do not touch the green IC chip on the side of the cartridge. This may prevent normal operation.
• Do not shake cartridges after opening their packages; this can cause them to leak.
• If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the product. Note that there is a valve in the ink supply port, making covers
or plugs unnecessary, but care is needed to prevent the ink from staining items that the cartridge
touches. Do not touch the ink cartridge ink supply port or surrounding area.
• Use an ink cartridge before the date printed on its package.
• Do not dismantle an ink cartridge. This could damage the print head.
230