Epson Stylus Pro 4400 User Manual

							Printing with Windows51
1
1
1
1
1
1
1
1
1
1
1
1
English
Off
Select this setting to cut printouts manually. To cut printouts 
manually, follow the steps below.
1. Press the Paper Feed  or Paper Feed  button, and then 
match the cutting position with the scissors mark on the left 
side of the print head.
2. Press the Paper Source  button to select Roll Auto Cut On 
. 
3. Press and hold the Paper Source  button for 3 seconds. The 
paper cutter cuts the printout at the cutting position.
Making the Paper Size setting
You can select a paper size that you want to use. Select the proper 
paper size from the Paper Size list.
You can also add a custom paper size, using the steps below.
 
						

							52Printing with Windows 1. Select User Defined from the Paper Size list. The User Defined 
Paper Size dialog box appears.
2. Enter Paper Size Name, Paper Width and Paper Height, 
and then select Unit.
Note:
If you are using Windows Me or 98, the maximum paper height is 
44 inches (111.76 cm).
3. Click OK to save the custom paper size.
 
						

							Printing with Windows53
1
1
1
1
1
1
1
1
1
1
1
1
English
Making the Copies setting
You can specify the number of copies to print. Enter a number in 
the Copies box, or click the arrow next to the box. You can enter 
any number from 1 to 9999. When printing multiple copies of your 
document, select Collate to print one complete document set at 
a time. Select Reverse Order to print your documents in reverse 
order, starting with the last page.
 
						

							54Printing with Windows
Making the Orientation settings
You can specify the direction of printing on the page.
PortraitPrint direction is short edge first, like most magazines.
LandscapePrint direction is long edge first, like many 
spreadsheets.
Rotated by 180°Prints your document upside down.
Note:
This function is not available when Roll Paper (Banner) 
is selected as the Paper Source setting.
 
						

							Printing with Windows55
1
1
1
1
1
1
1
1
1
1
1
1
English
Making the Printable Area setting
This setting is available when you select Paper Tray or Manual 
Feed as the Paper Source setting. You can make the following 
settings.
Standard
Select this setting to use the standard printable area.
Note:
This setting is available only when Plain Paper, Plain Paper (line 
drawing), or Tracing Paper is selected as the Media Type setting.
Maximum
Select this setting to increase the printable area at the bottom edge.
 
						

							56Printing with Windows Note:
❏This setting is available only when Plain Paper, Plain Paper (line 
drawing), or Tracing Paper is selected as the Media Type setting.
❏The print quality may decline at the edges of printouts when this 
setting is selected. Before printing large jobs using this setting, print 
a single sheet to check the quality. When this setting is selected, make 
sure that paper loaded in the paper tray is not curled.
Centered
Select this setting to center printouts.
Making the Roll Paper Option settings
This option is available when you select Roll Paper or Roll Paper 
(Banner) as the Paper Source setting. You can make the following 
settings.
 
						

							Printing with Windows57
1
1
1
1
1
1
1
1
1
1
1
1
English
Auto Rotate
Note:
This function is available only when Roll Paper is selected as the Paper 
Source setting. 
This function is effective only when the print data length is shorter 
than the printable width of the roll paper. The print data will 
automatically be turned 90 degrees to print crosswise, saving roll 
paper. 
To enable this function, follow the steps below.
1. Select Auto Rotate. The Roll Width button is activated.
2. Click Roll Width. The Roll Paper Width dialog box appears.
3. Select the installed roll paper size from the pull-down menu.
4. Click OK.
Original Auto Rotate onAuto Rotate off
 
						

							58Printing with Windows
Print Page Line
This function lets you specify whether to print a page line on the 
right side, and also below the document for manual cutting. To 
enable this function, select Print Page Line.
The Print Page Line operation changes according to the Auto Cut 
setting. Check these settings as necessary by referring to the 
printer’s operation.
Save Roll Paper
Note:
This function is available only when Roll Paper (Banner) is selected 
as the Paper Source setting. 
This function is effective if you wish to save roll paper, because 
the blank portion of the last page of your printed data is not fed 
through the printer.
To enable this function, select Save Roll Paper.
Auto Cut Print Page Line Printer’s Operation
Single Cut
Double Cut
Normal CutSelected Prints page line on the right side 
only, and cuts paper 
automatically after the print job.
Single Cut
Double Cut
Normal CutNot  selected Does not print page line, but cuts 
paper automatically after the 
print job.
Off Selected Prints page lines on the right side 
and below the document, but 
does not cut paper 
automatically after the print job. 
Off Not selected Does not print page lines or cut 
paper.
 
						

							Printing with Windows59
1
1
1
1
1
1
1
1
1
1
1
1
English
Making Settings on the Layout Menu
You can make the Reduce/Enlarge, Double-Sided Printing, and 
Multi-Page settings on this menu.
Note:
❏The functions on the Layout menu are not available when Roll 
Paper (Banner) is selected as the Paper Source setting.
❏According to the paper source you choose, some of the functions are 
not available.
 
						

							60Printing with Windows
Making the Reduce/Enlarge setting
You can fit the size of your data to the size of paper you to print 
on. To enable this function, select Reduce/Enlarge. When this 
function is enabled, you can make the following settings.
Fit to PageProportionally enlarges or reduces the size of your 
data to make it fit the paper size you have selected 
in the Output Paper Size.
CustomLets you define the percentage you want to enlarge 
or reduce a data. Click the arrows next to the Scale 
box to select a proportion from 10 to 400%.