Epson Stylus Pro 4400 User Manual

							Printing with Mac OS 9.x141
2
2
2
2
2
2
2
2
2
2
2
2
English
You can also perform Folded Booklet double-sided printing. It 
lets you make single-fold booklets. 
Note:
❏The double-sided printing feature is not available when the printer 
is accessed over a network, or is used as a shared printer.
❏Depending on the media type, stacks of up to 30 sheets can be loaded 
into the sheet feeder during double-sided printing.
❏Only use media types that are suitable for double-sided printing; 
otherwise, the print quality may deteriorate.
❏Depending on the type of paper and the amount of ink used to print 
text and images, ink may bleed through to the other side of the paper.
❏The surface of the paper may be smeared during the double-sided 
printing.
Standard double-sided printing
To print odd and even numbered pages on the opposite sides of 
a sheet, follow the steps below. 
1. Select the Double-Sided Printing. 
 
						

							142Printing with Mac OS 9.x 2. Click Margins. The following dialog appears.
3. Specify the edge of the paper where binding will be placed. 
You can choose Left, Top, or Right.
4. Specify the width of the binding margin, using the Binding 
Margin text box. You can specify any width from 3 to 30 mm.
Note:
The actual binding margin may vary depending on the settings 
specified in your application. We recommend that you test the print 
quality before printing the entire job.
5. Click OK to return to the Page Setup dialog, and then click OK 
to save your settings.
6. Make sure paper is loaded, and then send a print job from 
your application. Instructions for generating the 
even-numbered pages will be displayed while the 
odd-numbered pages are output. 
7. Follow the on-screen instructions and reload the paper.
Note:
❏The paper may curl during printing due to the amount of ink 
used. If this problem occurs, slightly curl the sheets in the 
opposite direction prior to reloading them into the printer.
❏Align the sheet stack by tapping its edges against a hard, flat 
surface prior to reloading the stack into the printer.
 
						

							Printing with Mac OS 9.x143
2
2
2
2
2
2
2
2
2
2
2
2
English
❏In the event of a paper jam, see “Clearing paper jams” on page 
340.
❏Follow the instructions provided when reloading the printouts. 
Paper jams or improperly placed binding margins may occur if 
the printouts are not reloaded correctly. 
8. Once the paper is reloaded, click Resume to print the 
even-numbered pages.
Folded Booklet double-sided printing
You can also make single-fold booklets using the double-sided 
printing feature. When you create a single-fold booklet, the pages 
that appear on the outside (after the booklet is folded) are printed 
first. The pages that will appear inside the booklet can then be 
printed after the paper is reloaded into the printer.
✽ Binding Edge
124
35 96
7810
1112
✽
Single-fold booklet
 
						

							144Printing with Mac OS 9.x A booklet can be created by printing pages 1 and 4 on the first 
sheet of paper, pages 5 and 8 on the second sheet of paper, and 
pages 9 and 12 on the third sheet of paper. After these sheets are 
reloaded into the sheet feeder, you can then print pages 2 and 3 
on the back of the first sheet of paper, pages 6 and 7 on the back 
of the second sheet of paper, and pages 10 and 11 on the back of 
the third sheet of paper. The resulting pages can then be folded 
and bound together into a booklet.
To create the booklet, follow the steps below.
1. Select Double-Sided Printing, and then select the Folded 
Booklet.
2. Click Margins. The Margins dialog appears.
3. Specify the edge of the paper where binding will be placed. 
You can choose Left, Top, or Right.
 
						

							Printing with Mac OS 9.x145
2
2
2
2
2
2
2
2
2
2
2
2
English
Note:
When Portrait is selected as the Orientation setting in the printer 
driver, Left or Right binding positions are available. The Top 
binding position is supported when Landscape is selected as the 
Orientation setting.
4. Specify the width of the binding margin, using the Binding 
Margin text box. You can specify any width from 3 to 30 mm. 
The specified margin width will be used on both sides of the 
fold. For example, if a 10-mm margin is specified, a 20-mm 
m ar g in wil l b e i nsert ed (a mar gi n of 10 mm wi ll  b e pl aced  on 
each side of the fold).
✽ Folding Edge
✽✽ Margin
5. Click OK to return to the Page Setup dialog, and then click OK 
to save your settings. 
6. Make sure paper is loaded, and then send a print job from 
your application.
Portrait  Landscape
✽ ✽
✽
 
						

							146Printing with Mac OS 9.x 7. Instructions for printing the inside pages will be displayed 
while the outside pages are output. Follow the on-screen 
instructions to reload the paper.
Note:
❏The paper may curl during printing due to the amount of ink 
used. If this problem occurs, slightly curl the sheets in the 
opposite direction prior to reloading them into the printer.
❏Align the sheet stack by tapping its edges against a hard, flat 
surface prior to reloading the stack into the printer.
❏Follow the instructions provided when reloading the printouts. 
Paper jams or improperly placed binding margins may occur if 
the printouts are not reloaded correctly.
8. Once the paper is reloaded, click Resume to print the inside 
pages. 
9. Once printing is complete, fold the sheets and bind them 
together using a stapler or other binding method.
 
						

							Printing with Mac OS 9.x147
2
2
2
2
2
2
2
2
2
2
2
2
English
Making the Reduce or Enlarge setting
You can enlarge or reduce the size of data while maintaining its 
aspect ratio. You can enter any number from 25 to 400 in the 
Reduce or Enlarge box.
Making the Printable Area settings
This setting is available when you select Paper Tray or Manual 
Feed as the Paper Source setting. You can make the following 
settings.
 
						

							148Printing with Mac OS 9.x
Standard
Select this setting to use the standard printable area.
Maximum
Select this setting to increase the printable area at the bottom edge.
Note:
❏This setting is available only when Plain Paper, Plain Paper (line 
drawing), or Tracing Paper is selected as the Media Type setting.
❏The print quality may decline at the edges of printouts when this 
setting is selected. Before printing large jobs using this setting, print 
a single sheet to check the quality. When this setting is selected, make 
sure that paper loaded in the paper tray is not curled.
Centered
Select this setting to center printouts.
 
						

							Printing with Mac OS 9.x149
2
2
2
2
2
2
2
2
2
2
2
2
English
Making the Roll Paper Option settings
This option is available when you select Roll Paper or Roll Paper 
(Banner) as the Paper Source setting. You can make the following 
settings.
Auto Rotate
Note:
This function is available only when Roll Paper is selected as the Paper 
Source setting.
 
						

							150Printing with Mac OS 9.x This function is effective only when the print data length is shorter 
than the printable width of the roll paper. The print data will 
automatically be turned 90 degrees to print crosswise, saving roll 
paper.
To enable this function, select Auto Rotate.
Print Page Line
This function lets you specify whether to print a page line on the 
right side and also below the printed data for manual cutting. To 
enable this function, select Print Page Line. 
The Print Page Line operation changes according to the Auto Cut 
setting. Check these settings as necessary by referring to the 
printer’s operation.
Auto Cut Print Page Line Printer’s Operation
Single Cut
Double Cut
Normal CutSelected Prints page line on the right side 
only, and cuts paper 
automatically after the print job.
Single Cut
Double Cut
Normal CutNot selected Does not print page line, and 
cuts paper automatically after 
the print job.
Original Auto Rotate onAuto Rotate off