Epson Stylus Pro 4400 User Manual
Have a look at the manual Epson Stylus Pro 4400 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Paper Handling271 6 6 6 6 6 6 6 6 6 6 6 6 English For information on the loaded capacity of Epson special media, see the following table. Loading A3 or larger paper in the paper tray 1. Make sure the printer is on and in the READY state. 2. Press the Paper Source button to select Sheet . Epson special media Size Loadable capacity in the paper tray Premium Semigloss Photo Paper A4 100 LTR 100 A3 50 Super A3/B 50 Premium Luster Photo Paper LTR 100 A3 50 Super A3/B 50 Photo Quality Ink Jet Paper A4 200 LTR 200 EPSON Proofing Paper Semimatte (Commercial)Super A3/B 50 Archival (Enhanced) Matte PaperA4 100 LTR 100 A3 50 Super A3/B 50 Watercolor Paper-Radiant WhiteSuper A3/B 20 Bright White Ink Jet Paper A4 100
272Paper Handling 3. Extend the paper tray and paper tray cover. 4. Lift up the paper tray cover.
Paper Handling273 6 6 6 6 6 6 6 6 6 6 6 6 English 5. Pull the paper guide roller up, and then slide the edge guide to the left slightly wider than the width of your paper. 6. Clean the inside of the paper tray to remove any dust. Dust may affect the print quality. 7. Fan a stack of paper, and then tap it on a flat surface to even the edges. If the paper is curled, flatten it before you load it. If it curls excessively and jams frequently, stop using it.
274Paper Handling 8. Load the sheets with the printable face down and the right edge of the paper resting against the right side of the paper tray. Make sure the sheets lie flat on the bottom of the tray. Note: ❏Always set the paper’s short edge first. ❏When you load sheets of paper, make sure to put the edges of the paper against the right inner corner of the paper tray; otherwise, printing may become misaligned. ❏When you add more sheets of paper to the paper tray, always line up the edges of the added paper to those of the paper already loaded.
Paper Handling275 6 6 6 6 6 6 6 6 6 6 6 6 English 9. Adjust the length of the paper tray and the edge guide according to the paper size. 10. Put the paper guide roller down. Make sure the paper guide roller is placed on the edge of the paper.
276Paper Handling 11. Adjust the length of paper tray cover, and then attach it to the paper tray. Note: Make sure the roll paper support is not raised. 12. If you have extended the paper tray and cover fully, pull the paper tray cover extension to support large-size printouts. Note: Before printing on cut-sheet media, make sure paper in the paper tray is not curled. If it is curled, uncurl it; otherwise, a paper jam may occur.
Paper Handling277 6 6 6 6 6 6 6 6 6 6 6 6 English Now, the printer is ready to print. While the printer is printing, do not open the top cover. If the top cover is opened while printing is in progress, the printer stops printing, and then restarts printing when the top cover is closed. Stopping and restarting printing may reduce the print quality. Loading paper smaller than A3 in the paper tray 1. Make sure the printer is on and in the READY state. 2. Press the Paper Source button to select Sheet . 3. Lift up the paper tray cover, and then pull the paper guide roller.
278Paper Handling 4. Pull the paper guide, and then slide the edge guide to the left slightly wider than the width of your paper. 5. Clean the inside of the paper tray to remove any dust. Dust may decrease the print quality. 6. Fan a stack of paper, and then tap it on a flat surface to even the edges. If the paper is curled, flatten it before you load it. If it curls excessively and jams frequently, stop using it.
Paper Handling279 6 6 6 6 6 6 6 6 6 6 6 6 English 7. Load the sheets with the printable face down and the right edge of the paper resting against the right side of the paper tray. Make sure the sheets lie flat on the bottom of the tray. Note: ❏Always set the paper’s short edge first. ❏When you load sheets of paper, make sure to put the edges of the paper against the right inner corner of the paper tray; otherwise, printing may become misaligned. ❏When you add more sheets of paper to the paper tray, always line up the edges of the added paper to those of the paper already loaded.
280Paper Handling 8. Adjust the length of the paper guide and the edge guide according to the paper size. 9. Put the paper guide roller down, and then re-attach the paper tray cover. Note: ❏Make sure the roll paper support is not raised. ❏Before printing on cut-sheet media, make sure paper in the paper tray is not curled. If it is curled, uncurl it; otherwise, a paper jam may occur.