Epson R2000 Service Manual

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Overview71
Confidential
4.1.2  ToolsThe following table indicates the tools recommended for use for disassembly, 
reassembly and adjustment.Note : All of the tools listed above are commercially available. EPSON provides the tools 
listed with EPSON tool code.4.1.3  ScrewsThe following table lists the screws used in this product. When disassembling and 
reassembling the printer, refer to the following table and use the specified screws...

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Overview72
Confidential
4.1.5  Work Completion ChecklistWhenever the printer is serviced, use the checklist shown below to confirm all work is completed properly and the printer is ready to be returned to the user.
Table 4-3. Work Completion Check
Classification
Item
Check Point
Check Field
Main Unit Self-test Is the operation normal?
Checked / Not necessary
On-line Test Is the printing attempt successful?Checked / Not necessary...

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Overview73
Confidential
4.1.5.1  Protection for Transportation (Securing the Carriage) 
(T.B.D)Before packing the printer to be returned to the user, attach several pieces of strong 
tape to the carriage to prevent damage during transportation.
1. Attach one side of the 40mm-length portion of the tape without folded end to the 
left side of the carriage aligning the tape’s corner with the carriage’s ribs as shown 
below.
2. Move the...

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Overview74
Confidential

When moving the Carriage Unit with the Front Cover and CD- R 
Tray Base opened, turn the PG CAM (Right) beforehand so that 
PG++ points downwards to release the PG in order to prevent 
interference between the Paper EJ Frame Assy and Carriage Unit.
Figure 4-5. Interference between the Frame and Carriage Unit
PG++ position
PG Cam (Right)
Paper EJ Frame
Point of 
Interference
Carriage Unit  

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Overview75
Confidential
4.1.7  DisassemblyThe flowchart below lists the step-by-step disassembly procedures. When disassembling each unit, refer to the page number shown in the figure.
Figure 4-6. Disassembly Flowchart
Rear Housing 
(p.77)
Start
Front Decoration 
Plate Left/Right 
(p.77)Panel Unit (p.78)Paper Support Assy 
(p.76)
Decoration Plate 
Left/Right (p.80)
Panel Unit (p.78) Front Decoration 
Plate Left/Right 
(p.77)Cover Open...

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Removing the Housings 76
Confidential
4.2  Removing the Housings4.2.1  Paper Support Assy1. While pulling out the left and right guide pins of the Paper Support Assy, remove 
the Paper Support Assy.
Figure 4-7. Removing the Paper Support Assy
4.2.2  Stacker Assy1. To disengage the guide pin on the right of the Stacker Assy, push the Stopper in 
the direction of the arrow with a flathead screwdriver or similar tool.
2. Pull out the...

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Removing the Housings 77
Confidential
4.2.3  Front Decoration Plate Left/Right1. Open the Stacker Assy.
2. While releasing the hook on the Front Decoration Plate Left, open the plate in the 
direction of the arrow, and remove it.
3. In the same way, remove the Front Decoration Plate Right.
Figure 4-9. Removing the Front Decoration Plate Left/Right
4.2.4  Rear Housing1. Remove the two C.B.P. M3 x 10 screws and the C.B.S. M3 x 6 screw...

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Removing the Housings 78
Confidential
4.2.5  Panel Unit1. Open the Printer Cover.
2. Open the Front Cover and CDR Tray Base.
Figure 4-13. Removing the Panel Unit (1)
Align the positioning tabs (one each on the left/right) with the 
positioning holes (one each on the left/right) on the Upper 
Housing.
Align the positioning tabs (three each on the left/right) with the 
positioning holes (three each on the left/right) on the Decoration...

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Removing the Housings 79
Confidential
3. Disengage the nine hooks on the bottom of the Panel Unit, and remove the Panel 
Unit while pulling out its tab.
4. Remove the Panel FFC from the Panel Unit. Refer to Figure 4-15.
5. Disconnect the Panel FFC and CDR Sensor cable from the Panel Board connectors 
and remove the Panel Unit.
Figure 4-14. Removing the Panel Unit (2)
HookTab
Connector
CDR Sensor
cable
Panel FFC
Panel Unit
Be careful...

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Removing the Housings 80
Confidential
4.2.6  Decoration Plate Left/Right1.Remove the Rear Housing. (p.77)
2.Remove the Front Decoration Plate Left/Right. (p.77)
3. Release the three hooks on the front of the Decoration Plate Right and lift the plate 
a little to release the tab and the four guide pins on the upper side, then remove the 
Decoration Plate Right.
4. In the same way, remove the Decoration Plate Left.
Figure 4-16. Removing...