Home > Epson > Printer > Epson R2000 Service Manual

Epson R2000 Service Manual

Here you can view all the pages of manual Epson R2000 Service Manual. The Epson manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 121

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Disassembling the Printer Mechanism 121
Confidential
DISASSEMBLING THE FRONT PAPER GUIDE PAD TRAY
1.Remove the Front Paper Guide Pad Tray in the direction of the arrow. (p.120)
2. Remove the three Waste Ink Pads from the Front Paper Guide Pad Tray.
Figure 4-136. Removing the Waste Ink Pad
Engage the two tabs of the Front Paper Guide Pad Tray with the 
holes of the Front Paper Guide as shown in Figure 4-135.
Waste Ink Pad
Front Paper...

Page 122

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Disassembling the Printer Mechanism 122
Confidential
4.4.15  PF Roller Shaft1.Remove the PF Encoder. (p.132)
2.Remove the Upper Paper Guide Assys. (p.127)
3. Loosen the two C.C. M3 x 4 screws that secure the PF Motor, and remove the PF 
Drive Belt from the PF Motor Pinion Gear.
4. Remove the spacer that secures Spur Gear 31.5, and remove Spur Gear 31.5 from 
the Printer Mechanism.
Figure 4-140. Removing the PF Drive Belt and Spur Gear...

Page 123

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Disassembling the Printer Mechanism 123
Confidential
5. Remove the PG Grounding Spring from the notch on the Main Frame, and remove 
the PF Grounding Spring from the groove on the PF Roller Shaft.
Figure 4-141. Removing the PF Grounding Spring
6. Make sure that the Left Parallelism Adjust Bushing is not protruding from the 
notch on the Main Frame. If it is protruding, loosen the C.B.S. (P4) M3 x 8 screw 
that secures the Left...

Page 124

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Disassembling the Printer Mechanism 124
Confidential
9. Remove the PF Roller Shaft from the Bushings on the Rear Paper Guide and the 
Center Support, slide the PF Roller Shaft to the left to remove it from Right 
Bushing 8, and remove the PF Roller Shaft along the notch of the Main Frame.
Figure 4-146. Removing the PF Roller Shaft
When performing the following procedure, pay attention to the 
following points.
Prevent the...

Page 125

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Disassembling the Printer Mechanism 125
Confidential
4.4.16  Release Holder Assy1.Remove the APG Assy. (p.89)
2. Release the PE Sensor connector cable from the five tabs on the Release Holder 
Assy.
3. Remove the three C.B.S. M3 x 6 screws that secure the Release Holder Assy.
4. Remove the three lower tabs of the Release Holder Assy from the Main Frame 
with a flathead screwdriver, and remove the Release Holder Assy upwards.
Figure...

Page 126

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Disassembling the Printer Mechanism 126
Confidential
4.4.17  FLAG Release Assy1.Remove the APG Assy. (p.89).
2.Remove the Release Holder Assy. (p.125)
3. Remove the guide pin on the Driven Release Holder from the Main Frame using 
tweezers, and slide the Driven Release Holder to the left as viewed from the front 
of the Printer Mechanism. 4. Release the three tabs on the Driven Release Holder from the Main Frame, and 
remove the FLAG...

Page 127

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Disassembling the Printer Mechanism 127
Confidential
4.4.18  Upper Paper Guide Assys1.FLAG Release Assy (p.126)
2.Remove the PE Sensor Holder. (p.135)
3. Pass a sheet of A3 size paper into the gap between the Upper Paper Guide Assy 
and the Rear Paper Guide.
Figure 4-153. Setting the Paper
Attach the five Perforated Sheets and the LD Cover Sheet to the six 
locations shown in the figure below to prevent ink from sticking to 
the LD...

Page 128

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Disassembling the Printer Mechanism 128
Confidential
4. Remove the six Upper Paper Guide Torsion Springs from the tabs on the Main 
Frame, and pull out the Upper Paper Guide Torsion Springs from the six Upper 
Paper Guide Assys.
Figure 4-154. Removing the Upper Paper Guide Torsion Spring5. Lift the six Upper Paper Guide Assys from the Main Frame to release the shaft 
referring to Figure 4-155, and remove the Upper Paper Guide Assys to...

Page 129

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Removing the Motors 129
Confidential
4.5  Removing the Motors4.5.1  CR Motor1.Remove the Upper Housing / Printer Cover. (p.81)2. Release the Carriage Lock, and move the Carriage Unit to the center. 
(Refer to 4.1.6 
Locking/Unlocking the Carriage and Opening/Closing the CDR Tray Base (p.73))
3. Disconnect the CR Motor connector cable from the Relay connector.
Figure 4-157. Removing the CR Motor Connector Cable
4. Press the Driven...

Page 130

EPSON Stylus Photo R1900/R2880/R2000Revision EDisassembly And Assembly Removing the Motors 130
Confidential
4.5.2  PF Motor1. Remove the Printer Mechanism. (Refer to 4.4.4 Lower Housing / Printer 
Mechanism (p.96))
2. Disconnect the PF Motor connector cable from connector CN116 (black) on the 
Main Board, and remove it from the Clamp on the Main Frame.
3. Remove the two C.C. M3 x 4 screws that secure the PF Motor.
4. Remove the PF Drive Belt from the PF Motor Pinion Gear, and remove the PF 
Motor from...
Start reading Epson R2000 Service Manual

Related Manuals for Epson R2000 Service Manual

All Epson manuals