Epson Projector EH-TW5650 User Manual

Adjusting the Image
40
b
Use the  buttons to
select the correcti on value, and then
press the 
 button to confirm the
selection.
The larger the value,  the lighter the dark
portions of the image become, but bright
areas may appear discolored. The upper
part of the gamma adjustment graph
becomes rounded.
The smaller the value, the darker the bright
portions of the image become. The lower
part of the gamma adjustment graph
becomes rounded.
c
•The horizontal axis of the gamma adjustment graph shows the...

Adjusting the Image
41
Viewing the Image at the Saved Image Quality
(Memory Function)
Saving a Memory
You can save the adjustment values for Image from the Configuration menu.
a
Press the  button, and then make
the settings for  Image that you want
to save.
b
Press the  button.
c
Use the  buttons to
select Save Memory , and then press
the 
 button to confirm the
selection.
d
Use the  buttons to
select the memory  name to be saved,
and then press the 
 button to
confirm the selection.
The current...

Adjusting the Image
42
FunctionExplanation
Renaming a Memory
Changes the memory name. Select  the memory name you want to
change, and then press the 
 button. Enter the memory name using
the soft keyboard. 
s   p.74
When you have finished, move the cursor over  Finish, and then press the
 button. 

Useful Functions
43
Enjoying 3D Images
Preparing to View 3D Images
Check the following before viewing 3D images.
•The source is HDMI1 or HDMI2.
•Set 3D Display  to Auto or 3D.
When  2D is set, press the 
 button on the remote control and switch to  Auto or 3D . s Signal  - 3D Setup  - 3D
Display   p.66
•Pair 3D Glasses. s  p.45
This projector supports the following 3D formats.
•Frame Packing
•Side by Side
•Top and Bottom
If the 3D image cannot be viewed
The projector automatically projects a  3D image...

Useful Functions
44
c
•I f  y o u  a r e  u s i n g  a  d e v i c e  o r  c a b l e  t h a t  d o e s  n o t  s upport 3D images, 3D projection cannot be performed.
•F o r  d e t a i l s  o n  3 D  f o r m a t  s e t t i n g s  o n  t h e  A V  d e v i c e ,  s e e  t h e  d o c u m e n t a t i o n  s u p p l i e d  w i t h  t h e  A V  d e v i c e .
•When the 3D format has not been correctly set up, an image will not be correctly projected as shown
below.
•If a 3D image is not projected correctly even...

Useful Functions
45
Attention
•Only connect to an electrical outlet that uses the voltage displayed on the adapter.
•Note the following points wh en handling the USB cable.
- You should not bend, twist, or pull the cable with too much force.
- You should not modify the cable.
- You should not perform wiring near an electric heater.
- You should not use the  cable if it is damaged.
Pairing 3D Glasses
To view 3D images, you first need to  pair the 3D Glasses with the projector.
Press the [Pairing] button...

Useful Functions
46
IndicatorsStatus
Flashes red two times x5Weak battery
Lit red Charging
Lit green Charging completed
Flashes green and red in turn Pairing
Lit green for ten seconds and then turns
off Power on or pairing succeeded
Converting 2D Images to 3D
You can convert 2D images from HDMI1 or HDMI2 into 3D images.
a
Press the  button to set 
3D
Display  to Auto .
The  button toggles  3D Display
between  Auto, 3D , and  2D.
b
Press the  button, to display the
menu in the order  Signal - 3D Setup
-...

Useful Functions
47
Warnings Regarding Viewing 3D Images
Note the following important points when viewing 3D images.
Warning
Disassembling or remodeling
•Do not disassemble or remodel the 3D Glasses.
This could cause a fire to occur or the images to appe ar abnormal when viewing, causing you to feel unwell.
Storage locations
•Do not leave the 3D Glasses or the supp lied parts within reach of children.
They could be accidentally swallowed. If anything is accidentally swallowed, contact a doctor...

Useful Functions
48
Caution
Viewing Time
•When viewing 3D images, always take periodic breaks during extended viewing.
Long periods of viewing 3D images may cause eye fatigue.
The amount of time and frequency of such breaks varies  from person to person. If your eyes still feel tired or
uncomfortable even after taking a break from viewing, stop viewing immediately.
Caution
Watching 3D Images
•If your eyes feel fatigued or uncomfortable when viewing 3D images, stop viewing immediately.
Continuing to view...

Useful Functions
49
Using the HDMI Link Function
HDMI Link Function
When an AV device that meets the HDMI CEC standards is connected to the projector's HDMI port, you can
perform linked operations such as linked power on and volume adjustment for the AV system from one
remote control.
c
•As long as the AV device meets  the HDMI CEC standards, you can us e the HDMI link function even if
the AV system in-betw een does not meet the HDMI CEC standards.
•Up to 3 multi-media players that meet the HDMI  CEC...