Epson Projector EH-TW5650 User Manual

Using the Projector on a Network (EH-TW5650 Only)
60
c
Select Screen Mirroring Settings , and then press the  button.
d
Select the Display Name  settings as necessary.
e
Set the Operation Mode .
•Basic: Connects using the basic settings.
•Extended: Allows you to make detailed connection settings.
f
Set the Adjust Image Quality  as necessary.
Select a small number to improve the quality an d select large number to increase the speed.
g
When you have selected Extended, make the  Extended settings....

Using the Projector on a Network (EH-TW5650 Only)
61
b
Press the  button on the remote control to switch to the Screen Mirroring source.
You see the Screen Mirroring standby screen.
c
Display Action Center , and then select  Connect.
You see a list of available devices.
d
Select the projector's Disp lay Name from the list.
e
If you see the PIN entry screen  on your computer, enter the PIN code displayed on the
Screen Mirroring standby sc reen or at the bottom right of the projected image.
The...

Using the Projector on a Network (EH-TW5650 Only)
62
c
On your computer, select Devices from Charms, and then select  Project.
d
Select Add a wireless display .
You see a list of available devices.
e
Select the projector's Disp lay Name from the list.
f
If you see the PIN entry screen  on your computer, enter the PIN code displayed on the
Screen Mirroring standby sc reen or at the bottom right of the projected image.
The projector displays the  image from your computer.
c
It may take some time until...

Using the Projector on a Network (EH-TW5650 Only)
63
Projecting Using the Miracast Function
If your mobile device such as a sm artphone supports Miracast, you can connect it to the projector wirelessly
and project images.
You can play audio through the projector's speake r system by connecting using Screen Mirroring.
a
Select Screen Mirroring Settings  on your projector as necessary.
b
Press the  button on the remote control to swit ch to the Screen Mirroring source.
You see the Screen Mirroring...

Configuration Menu
64
Configuration Menu Functions
Configuration Menu Operations
On the Configuration menu, you can make adjustments and settings for Signal, Image, Input Signal, and so on.
a
Press the  button.
Remote control Control panel
The Configuration menu is displayed.
b
Use the  buttons to
select the top menu  on the left, and
then press the 
 button to confirm
the selection.
When you select the top menu on the left,
the sub menu on the right changes.
The line at the bottom is a guide for...

Configuration Menu
65
c
For items adjusted using an adjustment bar, such as the brightness level, you can press the 
button while the adjustment screen is displayed to return the adjustment value to its default value.
Configuration Menu Table
If there is no image signal being input, you cannot adjust items related to the  Image or Signal  in the
Configuration menu. Note that the items displayed for the  Image, Signal , and Info vary depending on the
image signal being projected.
Image menu
Function...

Configuration Menu
66
FunctionMenu/Settings Explanation
Advanced
Gamma 2,1,0,-1,-2 Performs gamma adjustments. You can
select a raw value or adjust the gamma
while viewing the graph. 
s   p.39
Customized
*3
Reset
RGBCMY R/G/B/C/M/Y Hue, Satura-
tion, Bright-
nessAdjusts the hue, saturation, and bright-
ness for each R, G, B, C, M, and Y color.
s  p.38
EPSON Super White On, Off (This is  only available when receiving sig-
nal input from the HDMI1 or HDMI2 port.)
Set this to  On if you are experiencing...

Configuration Menu
67
FunctionMenu/Settings Explanation
3D Setup
*13D Display Auto, 3D, 2D To view 3D images, set this to Auto or 3D.
s  p.43
3D Format Side by Side, Top and Bottom Sets the 3D format for the input signal.
2D-to-3D Conver-
sion Off, Weak, Medium,
Strong Converts 2D images to 3D images.
3D Depth -10 to 10 Sets the depth for the 3D image.
Diagonal Screen
Size 60 to 300 Sets the projection size for the 3D image. By
matching this to the actual size, you can achieve
the optimum 3D effect.
3D...

Configuration Menu
68
FunctionMenu/Settings Explanation
Advanced
HDMI Video
Range
*1 *2
Auto, Normal, Ex-
panded (This can only be set when 
EPSON Super
White  is set to Off.)
When set to  Auto, the video level for the DVD
input signal to the HDMI1 or HDMI2 ports is au-
tomatically detected and set.
If you experience under or overexposure when
set to Auto , set the video level of the projector
to match that of the DVD player's video level.
Your DVD player may be se t to Normal or Expand.
Image...

Configuration Menu
69
FunctionMenu/Settings Explanation
HDMI Link
Device Connections - Displays a list of devices connected
to the HDMI1 or HDMI2 ports.
HDMI Link On, OffEnables or disables the HDMI Link
function.
Audio Out Device Projector, AV System When an AV system is connected,
you can set whether to output audio
from the projector's speaker, or
from the AV system's speaker.
Power On Link Off, Bidirectional, Device -
> PJ, PJ -> Device Sets the link function when the
power is turned on....