Epson Projector EH-TW5650 User Manual

Configuration Menu
70
FunctionMenu/Settings Explanation
Lock Setting
Child Lock On, Off
This locks the  button on the
projector's control  panel to prevent
children from turning on the pro-
jector by accident. You can turn on
the power when locked by holding
down the 
 button for approxi-
mately three seconds. You can still
turn off the device using the 
button, or perform operations with
the remote control as usual.
If changed, this setting is enabled
after you power off the projector
and the...

Configuration Menu
71
FunctionMenu/Settings Explanation
Reset
Yes, No Resets all Settings except for  Audio
Out Device,  Power On Link , Power
Off Link , User Button , and Memo-
ry .
Extended menu
Function Menu/Settings Explanation
Home Screen
Home Screen Auto
Disp. On, Off Selects whether or not to display the Home
screen automatically when the projector turns
on. The Home screen is  not displayed when the
selected source has an image signal when the
projector turns on.
Custom Function 1 Power Consump-...

Configuration Menu
72
FunctionMenu/Settings Explanation
Operation
Direct Power On On, Off You can set up the projector so that projection
starts as soon as the power cord is plugged in
without any button operations.
Note that when this is set to  On, projection starts
if power is restored af ter a blackout or other
power outage and the power cord is still plugged
into the projector.
Sleep Mode On, Off If no signal is input for the set amount of time, or
if the lens cover is closed for the set amount of...

Configuration Menu
73
FunctionMenu/Settings Explanation
Screen Mirror-
ing Settings
Display
Name -
(Only available when Screen Mirroring is set to
On .)
Enter a name to identify the projector when
searching for the projector using the Screen Mir-
roring feature.
Operation
Mode Basic, Extended
Select Extended  to enable  Extended.
Adjust Im-
age Quality 1 (Fine), 2, 3, 4 (Fast)
(Only available when Screen Mirroring is set to
On .)
Adjusts the Screen Mirroring speed/quality.
Extended Interrupt...

Configuration Menu
74
Yes:Saves the settings and exits the Network menu.
No:Exits the Network menu without saving the settings.
Cancel :Continues displaying the Network menu.
Soft Keyboard Operations
In the Network menu, the soft keyboard appears when you need to enter numbers and characters. Use the
 buttons on the remote control or  buttons on the control panel to
select the desired key, and then press the 
 button to enter. Press  Finish to confirm your input, or
Cancel  to cancel your input.
CAPS...

Configuration Menu
75
Function Menu/SettingsExplanation
SSID
Up to 32 alphanumeric
characters (This can only be set when 
Connection Mode is set to Ad-
vanced .)
Enter an SSID. When an SSID is provided for the wireless LAN
system in which the projector  participates, enter the SSID.
Search Access PointTo Search View
(This can only be set when  Connection Mode is set to Ad-
vanced .)
Search for available wireless network access points.
 indicates currently connected access points.  indicates
the access...

Configuration Menu
76
Info menu
Function Menu/SettingsExplanation
Projector Info
Lamp Hours Displays the cumulative lamp operating time.
Source Displays the name of the port to which the current input
source is connected.
Input Signal Displays the input signal setting of the current input source.
Resolution Displays the resolution.
Scan Mode Displays the scan mode.
Refresh Rate Displays the refresh rate.
3D Format Displays the 3D format of  the signal input during 3D projec-
tion (Frame Packing, Side by...

Troubleshooting
77
Problem Solving
Reading the Indicators
You can check the status of the projector from the flashing and lit ,  (operation indicators), o, m, and
 on the control panel.
Refer to the following table to check the projector's status and how to remedy problems shown by the
indicators.
Indicator status during an error/warning
: Flashing : Lit : Status maintained : Off
Indicators Status Remedy
(blue)
(orange)Replace Lamp
It is time to replace your lamp. Replace the lamp with a new lamp
as...

Troubleshooting
78
IndicatorsStatus Remedy
(blue)
(orange)Internal Error
The projector has malfunctioned.
Remove the power plug from the 
electrical outlet, and contact
your local dealer or the ne arest Epson repair center. 
s Epson
Projector Contact List
(blue)
(orange) Fan Error
Sensor Error
(blue)
(orange)
Auto Iris Error
(blue)
(orange)
Power Err. (Ballast)
(blue)
(orange)Lamp Error
Lamp Failure
Lamp Cover Open
There is a problem with the lamp
, or it failed to turn on.
•Disconnect the power cord,...

Troubleshooting
79
IndicatorsStatus Remedy
(blue)
(orange)High Temp Error
(Overheating)
The internal temperature is too high.
•The lamp turns off automatically 
and projection stops. Wait for
about five minutes. When the fa n has stopped, disconnect the
power cord.
•If the projector is installed next to a wall, make sure there is at
least 20 cm between the wall and  the projector's exhaust vent.
•If the air filter is clogged, clean it. s  p.91
•When using at an altitude of 1500 m or more, set  High...