Epson Projector EH-TW5650 User Manual

Preparing
20
c
•To output audio from external speakers, set Audio Out Device to Projector. s Settings  - HDMI
Link  - Audio Out Device   p.68
•When an AV system is not connected to the projecto r, audio is output from the external speakers, even
if  Audio Out Device  is set to AV System .
Connecting Bluetooth® devices
You can connect audio devices that su pport Bluetooth (A2DP compliant) or 3D Glasses (Bluetooth 3DS Profile
compliant).
See the following for informat ion on connecting 3D Glasses.
s...

Preparing
21
e
Use the  buttons to select the Bluetooth device you want to connect to, and
then press the 
 button to connect.
The next time you turn on the projector, it automatically connects to the last device it connected to.
To switch between the connected device s, repeat the procedure from step 3.
c
•When Audio Out Device  is set to AV System , audio cannot be output from Bluetooth audio devices.
To output audio from Bluetooth audio devices, set  Audio Out Device to Projector. 
s Settings  -
HDMI...

Preparing
22
c
•Connect a Bluetooth device that supports copyright protection (SCMS-T).
•You may not be able to connect depending on the standard and type of device.
•Even when connecting within the specified communication distance,  connections can be lost due to
the status of the signal.
•The communication method for Bluetooth uses th e same frequency (2.4 GHz) as wireless LAN
(IEEE802.11b/g) or microwave ovens. Therefore, if th ese devices are used at the same time, radio wave
interference may occur,...

Preparing
23
Preparing the Remote Control
Installing the Remote Control Batteries
Attention
•Check the positions of the (+) and (-)  marks inside the battery holder to en sure the batteries are inserted the
correct way.
•You cannot use othe r batteries except for the AA size manganese or alkaline.
a
Remove the battery cover.
While pushing the battery compartment
cover catch, lift the cover up.
b
Replace the old batteries with new
batteries.
Check the polarity of the batteries (+) and
(-) before...

Preparing
24
Remote Control Operating Range
Operating range (left to right)Operating range (top to bottom) 

Basic Operations
25
Projecting Images
Turning On the Projector
a
Connect the equipment to the
projector.
b
Connect using the power cord
supplied.
c
Press the  button on the remote
control or the control panel.
Remote control Control panel
The operation indicator flashes blue as the
projector warms up. On ce the projector is
warmed up, the operation indicator stops
flashing and turns blue.
c
When  Direct Power On  is set to
On , you can start projecting by
simply connecting the power cord
to the projector...

Basic Operations
26
c
•This projector provides a Child Lock function to prevent children from accidentally turning the power
on and a Control Panel Lock function to prevent accidental operations and so on. 
s  Settings  - Lock
Setting  - Child Lock /Control Panel Lock   p.68
•This projector provides an Auto Setup function to automatically select the optimum settings when the
input signal for the connecte d computer image switches. 
s Signal  - Auto Setup   p.66
•When using at an altitude of 1500 m or...

Basic Operations
27
cDisplays the Configuration menu. s  p.64
dPerforms menu options assigned to  Home Screen in the Extended  menu.
s Extended  - Home Screen   p.71
eSets the 3D function. s  p.66
fChanges the  Color Mode. s  p.34
c
The Home screen disappears after 10 minutes of inactivity.
Turning Off
a
Turn off the connected equipment.
b
Press the  button on the remote
control or the control panel.
Remote control Control panel
A confirmation message is displayed.
c
Press the  button again.
The...

Basic Operations
28
Adjusting the Projected Image
c
Since images are unstable immediately after the projector is turned on, before you make focus, zoom,
or lens shift settings, we recommend waiting 30 minu tes or more after starting to project the images.
Displaying the Test Pattern
When adjusting the zoom/focus or the projection position just after setting up the projector, you can display
a test pattern instead of  connecting video equipment.
Press the 
 button on the remote control to display the te...

Basic Operations
29
Adjust the Height of the Image
Press the foot release lever to extend the front adjustable foot. You can tilt the projector up to 11° to adjust
image height.
c
It becomes more difficult to focus the higher the tilt angle is. Use a moderate tilt angle.
Adjusting the Projector's Tilt
If the projected image is horizontally tilted (the left and right side s of the projected image are at different
h e i g h t s )  w h e n  t h e  p r o j e c t o r  i s  s e t u p  o n  a  t a b l e ,...