Epson Projector EH-TW5650 User Manual

							Preparing
20
c
•To output audio from external speakers, set Audio Out Device to Projector. s Settings  - HDMI
Link  - Audio Out Device   p.68
•When an AV system is not connected to the projecto r, audio is output from the external speakers, even
if  Audio Out Device  is set to AV System .
Connecting Bluetooth® devices
You can connect audio devices that su pport Bluetooth (A2DP compliant) or 3D Glasses (Bluetooth 3DS Profile
compliant).
See the following for informat ion on connecting 3D Glasses.
s "Pairing 3D Glasses" p.45
Audio input to the HDMI1 port, HDMI2 port, or Screen Mi rroring is output from speakers or headphones that
support Bluetooth.
a
Press the  button to display the menu  in the following order; Settings - Bluetooth  -
Bluetooth Audio.
b
Use the  buttons to select  On, and then press the  button to confirm the
selection.
c
Turn on "pairing mode" on the Bluetooth device you want to connect to.
See the documentation supplied with the Bluetooth device for more information.
d
Select  Search Bluetooth Device .
A list of available devices is displayed. 
						

							Preparing
21
e
Use the  buttons to select the Bluetooth device you want to connect to, and
then press the 
 button to connect.
The next time you turn on the projector, it automatically connects to the last device it connected to.
To switch between the connected device s, repeat the procedure from step 3.
c
•When Audio Out Device  is set to AV System , audio cannot be output from Bluetooth audio devices.
To output audio from Bluetooth audio devices, set  Audio Out Device to Projector. 
s Settings  -
HDMI Link -  Audio Out Device   p.68
•There is a delay in the audio output from any Bluetooth audio devices.
Bluetooth specifications
VersionBluetooth Ver. 3.0
OutputClass 2
Communication dis-
tanceApprox. 10 m
Supported profilesA2DP
Content protectionSCMS-T
Frequency used2.4 GHz band (2.402 to 2.480 GHz)
Supported codecsSBC, Qualcomm® aptX™ audio
Warning
•Electromagnetic interference may cause medical equipm ent to malfunction. Before using the device, make
sure there is no medical equipment in the vicinity.
•Electromagnetic interference may cause automaticall y controlled equipment to malfunction which could
cause an accident. Do not use the device near automa tically controlled equipment such as automatic doors
or fire alarms. 
						

							Preparing
22
c
•Connect a Bluetooth device that supports copyright protection (SCMS-T).
•You may not be able to connect depending on the standard and type of device.
•Even when connecting within the specified communication distance,  connections can be lost due to
the status of the signal.
•The communication method for Bluetooth uses th e same frequency (2.4 GHz) as wireless LAN
(IEEE802.11b/g) or microwave ovens. Therefore, if th ese devices are used at the same time, radio wave
interference may occur, the image and audio ma y be interrupted, or communication may not be
possible. If you do need to use these devices at  the same time, make sure there is enough distance
between them and the Bluetooth device.
•You cannot connect multiple  Bluetooth devices to the projector at the same time. 
						

							Preparing
23
Preparing the Remote Control
Installing the Remote Control Batteries
Attention
•Check the positions of the (+) and (-)  marks inside the battery holder to en sure the batteries are inserted the
correct way.
•You cannot use othe r batteries except for the AA size manganese or alkaline.
a
Remove the battery cover.
While pushing the battery compartment
cover catch, lift the cover up.
b
Replace the old batteries with new
batteries.
Check the polarity of the batteries (+) and
(-) before installing.
c
Reattach the battery cover.
Press the cover until it clicks into place.
c
If delays in the responsiveness of the
remote control occur or if it does not
operate, it probably means that the
batteries are becoming flat. When this
happens, replace them with new
batteries. Have two AA size manganese
or alkaline batteries ready. 
						

							Preparing
24
Remote Control Operating Range
Operating range (left to right)Operating range (top to bottom) 
						

							Basic Operations
25
Projecting Images
Turning On the Projector
a
Connect the equipment to the
projector.
b
Connect using the power cord
supplied.
c
Press the  button on the remote
control or the control panel.
Remote control Control panel
The operation indicator flashes blue as the
projector warms up. On ce the projector is
warmed up, the operation indicator stops
flashing and turns blue.
c
When  Direct Power On  is set to
On , you can start projecting by
simply connecting the power cord
to the projector without having to
press any buttons. 
s  Extended  -
Operation  - Direct Power
On   p.71
d
Open the lens cover.
e
Turn on the connected equipment.
Warning
•Do not look into the lens during projection. The
powerful light emitted could cause damage to
eyesight.
•Do not stand in front of th e lens during projection.
Clothes could be damaged due to the high
temperature. 
						

							Basic Operations
26
c
•This projector provides a Child Lock function to prevent children from accidentally turning the power
on and a Control Panel Lock function to prevent accidental operations and so on. 
s  Settings  - Lock
Setting  - Child Lock /Control Panel Lock   p.68
•This projector provides an Auto Setup function to automatically select the optimum settings when the
input signal for the connecte d computer image switches. 
s Signal  - Auto Setup   p.66
•When using at an altitude of 1500 m or more, set  High Altitude Mode to On. s Extended  - Operation  -
High Altitude Mode   p.71
If the target image is not projected
If the image is not projected, you can switch  the source using one of the following methods.
Remote control Control panel
Press the button for the target port.
Press the  button and select the target port.
Press the 
 button to confirm the selection.
Using the Home Screen
The Home screen feature allows you to easily sele ct an image source and access useful functions.
Press the 
 button on the remote control or the control panel to display the Home screen.
Under the following conditions, the Home screen is disp layed automatically when the projector is turned on.
•Home Screen Auto Disp. is set to On. s Extended  - Home Screen  - Home Screen Auto Disp.   p.71
•There are no signals from the connected sources.
aSelects the source you want to project.
bDisplays the connection  guide (EH-TW5650 only). 
						

							Basic Operations
27
cDisplays the Configuration menu. s  p.64
dPerforms menu options assigned to  Home Screen in the Extended  menu.
s Extended  - Home Screen   p.71
eSets the 3D function. s  p.66
fChanges the  Color Mode. s  p.34
c
The Home screen disappears after 10 minutes of inactivity.
Turning Off
a
Turn off the connected equipment.
b
Press the  button on the remote
control or the control panel.
Remote control Control panel
A confirmation message is displayed.
c
Press the  button again.
The operation indicator flashes and the
projector begins to cool down.
d
Wait until cool-down is complete.
When cool-down is complete, the
operation indicator stops flashing.
e
Disconnect the power cord.
c
If the power cord is connected,
some electricity is consumed even
if no operations are made.
f
Close the lens cover.
c
Do not turn the projector back on immediately afte r turning off the projector. Turning the projector
on/off too frequently can caus e the lamp to malfunction. 
						

							Basic Operations
28
Adjusting the Projected Image
c
Since images are unstable immediately after the projector is turned on, before you make focus, zoom,
or lens shift settings, we recommend waiting 30 minu tes or more after starting to project the images.
Displaying the Test Pattern
When adjusting the zoom/focus or the projection position just after setting up the projector, you can display
a test pattern instead of  connecting video equipment.
Press the 
 button on the remote control to display the te st pattern. The standard for horizontal lines at
the top and bottom uses 2.40:1 CinemaScope.
Press the  button again to end the test pattern display.
Adjusting the Focus
Adjust the focus using the focu s ring or the focus adjuster.
Adjusting the Projection Size
Adjust the size of the projected image usin g the zoom ring or the zoom adjuster. 
						

							Basic Operations
29
Adjust the Height of the Image
Press the foot release lever to extend the front adjustable foot. You can tilt the projector up to 11° to adjust
image height.
c
It becomes more difficult to focus the higher the tilt angle is. Use a moderate tilt angle.
Adjusting the Projector's Tilt
If the projected image is horizontally tilted (the left and right side s of the projected image are at different
h e i g h t s )  w h e n  t h e  p r o j e c t o r  i s  s e t u p  o n  a  t a b l e ,  a d j u s t  t h e  r e a r  f o o t  s o  t h a t  b o t h  s i d e s  a r e  l e v e l  w i t h  e a c h  o t h e r .
Adjusting the Position of  the Image (Lens Shift)(EH- TW5650/EH-TW5600 only)
If the projector cannot be installed directly in front of  the screen, you can adjust the position of the image by
using lens shift.
Turn the lens shift dial on the projecto r to adjust the position of the image.