Epson Projector EH-TW5650 User Manual

							Useful Functions
50
c
To use the HDMI Link function, you must configure the connected device. See the documentation
supplied with the connected  device for more information.
Connecting
You can check the connected devices that are available  for HDMI Link, and select on the device you want to
project the image from. Devices that can be controlled by HDMI Link automatically become the selected
device.
Before displaying the list of  connected devices, check that  HDMI Link is set to On. 
s Settings -  HDMI
Link  - HDMI Link   p.68
a
Press the  button, and then select
Device Connections .
The Device Connections  list is displayed.
Devices that have an aqua icon to their left
are linked by HDMI Link.
If the device name cannot be determined
this field is left blank.
b
Select the device yo u want to operate
using the HDMI Link function.
c
•If the cable does not meet the HDMI st andards, operations are not possible.
•Some connected devices or functions of those device s may not operate properly even if they meet the
HDMI CEC standards. See the documentation and so  on supplied with the connected device for more
information. 
						

							Useful Functions
51
Playing Back Image Data (Slideshow)
Compatible Data
The following types of files stored on USB storage devices such as USB memories and digital cameras that
are connected to the projector's USB po rt can be displayed as a slideshow.
Slideshow compatible file types
File Type (Extension) Notes
.jpg•Images using CMYK color mode are not compatible.
•Progressive format images are not compatible.
•Images with a resolution greater than 8192 x 8192 are not compatible.
•Due to the characteristics of JPEG files,  images may not be projected clearly if the
compression ratio is too high.
Playing a Slideshow
a
Connect a USB storage device.
Files are displayed as thumbnails.
To open a folder, select the folder, and then press the  button.
c
If thumbnails of the files are not displayed, press the  button on the remote control to
switch the source.
b
Select  Slideshow .
Use the  buttons to select  Slideshow at the bottom right of the screen, and then
press the 
 button.
Slideshow starts.
c
•To close the slideshow, discon nect the USB storage device.
•Select an image from the thumbnails and press the  button to enlarge the selected image.
Press the 
 buttons on the remote control when viewing an enlarged image to change between
images. You can also rotate the image using the 
 buttons. 
						

							Useful Functions
52
Settings for Slideshow
You can set the file display order and slideshow operations on the option screen.
a
Use the  buttons to position the cursor over the folder where you want
to change settings,  and then press the 
 button.
The submenu is displayed.
b
Select Option, and then press the button.
The option screen is displayed.
c
Position the cursor over the item  you want to change, and press the  button to make
settings for each item.
The following table shows th e details for each item.
Display OrderYou can select to display the files in  Name Order or Date Order .
Sort OrderYou can select to sort the files  In Ascending or In Descending  order.
Continuous PlayYou can set whether to repeat a slideshow.
Screen Switching
TimeWhen playing a slideshow, you can set the time for a single file to be dis-
played. You can set a time between  No (0) to 60 second s. When you set No,
auto play is disabled.
EffectYou can set the screen effects when changing slides.
d
When you have finished making settings, use the  buttons to position
the cursor over  OK, and then press the 
 button.
The settings are applied.
If you do not want to apply the settings, position the cursor on  Cancel, and then press the 
 button. 
						

							Useful Functions
53
Projecting Two Images Simultaneously (Split
Screen) (EH-TW5650 Only)
Projecting in Split Screen
You can use the split screen feature to simultaneously project two images from different image sources
(HDMI1/HDMI2 and Screen Mirroring).
Check the following points before you start projecting in Split Screen.
•Connect devices to the projector using Screen Mirroring. s  p.59
•Make sure the source is HDMI1 or HDMI2.
a
Press the  button to display the Settings menu.
b
Select Split Screen , and then press the  button.
Images from the HDMI1 or HDMI2 source are projec ted on the left of the screen, and images from
Screen Mirroring are projected  on the right of the screen.
c
3D images cannot be projected in  the split screen projection.
Changing the Split Screen Settings
When you press the  button while performing the split screen projection, you can change the Split
Screen settings.
The following table shows th e details for each item.
Screen Right For-
matSelect the orientation and size of  the image sent by Screen Mirroring.
Audio SourceSelect the source to output audio. When  Screen Left is selected, audio is
output from the HDMI1 or HDMI2 source. When  Screen Right is selected,
audio is output from Screen Mirroring.
Exit Split ScreenExits the split screen display.
Exiting Split Screen
To exit the split screen projection, press the  button. 
						

							Using the Projector on a Network (EH-TW5650 Only)
54
Projecting Using Wireless LAN
You can project images from smartphones, tablets, and computers over wireless LAN.
To project over wireless LAN, you need to make wire less network settings for the projector and the connected
device in advance. You do not need to install the wirele ss LAN unit as this projector has built-in wireless LAN.
Use Epson iProjection to project ov er wireless LAN. You can download Epson iProjection for free using one
of the following methods; however,  any fees incurred when communicating are the responsibility of the
customer.
•Download Epson iProjection (Windows/Mac) from the following Web site.
http://www.epson.com/
•Download Epson iProjection (iOS/Android ) from the App Store or Google Play.
Selecting Network Settings for the Projector
Before you can project from your wireless network, yo u need to select network settings for the projector.
a
Press the  button to display menus in the order  Network - Wireless LAN Power .
b
Use the  buttons to select On, and then press the  button.
c
Select  Network Configuration , and then press the  button. 
						

							Using the Projector on a Network (EH-TW5650 Only)
55
d
Select Basic, and then set the fo llowing as necessary.
•Projector Name: Enter a name up to 16 alphanumeric characte rs long to identify the projector over the
network.
•Remote Password : When operating the projector from a smartpho ne or a tablet, enter a password up to 8
alphanumeric characters long for accessing the projector.
•Display LAN Info. : Set the display format for the projector's network information.
c
Use the displayed keyboard to enter the  name, passwords and keyword. Press the 
 buttons on the remote control to highlight characters, and then press  to
enter them.
e
Select  Wireless LAN , and then press the  button.
f
Select the Connection Mode  setting.
•Quick: Lets you quickly connect to  one smartphone, tablet, or computer. When you select  Quick,  g o  t o  s t e p  1 0 .
•Advanced : Lets you connect to multiple smartphones, tablets, or computers over a wireless network access
point. When you select  Advanced, go to step 7.
When switching the connect ion mode, follow the on-screen instruct ions to save your settings. After
saving the settings, the  Network menu is displayed.
g
Select Network Configuration  - Wireless LAN - Search Access Point , to select the access
point you want to connect to.
h
If you need to assign th e SSID manually, select  SSID to enter the SSID. 
						

							Using the Projector on a Network (EH-TW5650 Only)
56
i
Assign an IP address to the projector as necessary.
•If your network assigns addresses automatically, select  IP Settings to set the DHCP setting to  On.
•If you need to set addresses manually, select  IP Settings to set the DHCP setting to Off, and then enter the
projector's  IP Address,  Subnet Mask, and Gateway Address as necessary.
j
When you have finished se lecting settings, select Complete and then follow the on-screen
instructions to save your  settings and exit the menus.
k
Press the  button on the remote control. The  wireless network settings are complete
when you see the correct IP addr ess on the LAN standby screen.
When you have finished making wireless settings for yo ur projector, you need to make wireless settings on
the connected device. Then start the network software  to send images to your projector through a wireless
network.
c
To prevent the SSID and IP address from being  displayed on the LAN standby screen or the Home
screen, set  SSID Display  and IP Address Display  to Off . 
s Network  - Network Configuration  -
Wireless LAN   p.72
Selecting the Computer's Wireless LAN Settings
Before connecting to the projector, select the correct wireless network on your computer.
Selecting wireless network settings in Windows
a
To access your wireless utility software, doub le-click the network icon on the Windows
taskbar.
b
When connecting in Advanced  connection mode, select the network name (SSID) of the
network the projector is connecting to.
c
Click  Connect .
Selecting wireless netw ork settings in Mac
a
Click the AirPort icon on the menu  bar at the top of the screen. 
						

							Using the Projector on a Network (EH-TW5650 Only)
57
b
When connecting in Advanced connection mode, make sure AirPort is turned on and select
the network name (SSID) of the netw ork the projector is connecting to.
Setting Up Wireless Network Security
You can set up security for your projector to use on  a wireless network. Set up one of the following security
options to match the settings used on your network:
•WPA2 security
•WPA/WPA2 security
a
Press the  button to display menus in the order  Network - Network Configuration  -
Security .
b
Select the security settings to  match your network settings.
c
When you have finished making settings, select Complete and follow the on-screen
instructions to save your  settings and exit the menus.
Connecting a Mobile Device Using a QR Code
When wireless LAN settings have been completed for the projector, you can read the QR code projected onto
the projection screen by Epson iProjection (V1.3.0 or later) to connect mobile devices such as smartphones
and tablets.
c
When using Epson iProjection in  Quick connection mode, we recommend making security settings.
s  p.57
a
Press the  button to display the QR code.
c
•If you press the  button, you can also display the QR code from the Home screen.s  p.26
•If the QR code is not displayed, set Display LAN Info.  to Text & QR Code  from the
Network  menu. 
sNetwork  - Network Configuration  - Basic  - Display LAN Info.   p.74
•To hide the QR code, press the  button.
b
Start Epson iProjection on yo ur smartphone or tablet. 
						

							Using the Projector on a Network (EH-TW5650 Only)
58
c
Read the projected QR code in Epson iProjection.
Read the code from in front of the screen so that the QR code fits into the guide in your smart phone
or tablet. If you are too far from the screen, the code may not be read.
When a connection is established, select the  Contents menu from 
, and select the file you want to
project. 
						

							Using the Projector on a Network (EH-TW5650 Only)
59
Projecting in Screen Mirroring
You can send images to your projector from mobile devices such as laptops, smartphones, and tablets using
Miracast technology.
If your device supports Miracast, yo u do not need to install any additional software. When using a Windows
computer, make sure that you have the necessary adapter for establishing a Miracast connection.
Note the following limitations when using Screen Mirroring features.
•You cannot play interlaced images.
•You cannot play multi-channel  audio over 3ch (channel 3).
•You cannot project images with a resolution above 1920 x 1080 and a frame rate above 30 fps.
•You cannot play 3D video.
•Depending on the device being used, you may not be able  to play content that is copyright protected over a
Miracast connection.
•The audio and connection to Bluetooth audio device s may be lost due to radio wave interference.
•Audio may continue to be output from Screen Mirroring  even when projecting images from a source other than
Screen Mirroring.
•Do not change the projector's  Screen Mirroring Settings during Screen Mirroring projection. Doing so may cause
the projector to disconnect and it  may take a while to re-connect.
•While projecting using Screen Mirroring, do not  turn off the projector using the power breaker.
c
Mobile devices with Android installed or Windows  8.1 or later installed mainly support Miracast.
Support for Miracast varies depending on the mobi le device. See your mobile device manual for
details.
Selecting Screen Mirroring Settings
Select  Screen Mirroring Settings  on your projector to project im ages from your mobile device.
a
Press the  button to display menus in the order  Network - Screen Mirroring .
b
Use the  buttons to select On, and then press the  button.