Epson Projector EH-TW5650 User Manual

Basic Operations
30
Attention
When using lens shift for adjusting the position of the image, adjust the image by moving it upward.
c
When adjusting the projection position using the lens shift, you are recommended to install the
projector in parallel with the screen.
Correcting Distortion
You can correct keystone distortion using one of the following methods.
Correct automatically
(EH-TW5650/EH-
TW5600 only) Auto V-Keystone Automatically correct vertical keystone distortion.
Correct manually H-Keystone...

Basic Operations
31
•Projection is set to Front. s Extended  - Projection   p.71
c
If you do not want to use the Auto V-Keystone function, set  Auto V-Keystone to Off. s Settings  -
Keystone  - Auto V-Keystone   p.68
Correct manually (H-Keystone adjuster)
Move the horizontal keystone adjuster to the right or left to perform horizontal keystone correction.
c
•When  Keystone  is set to Quick Corner , the H-Keystone adjuster does not function. Set it to H/V-
Keystone . 
sSettings - Keystone   p.68
•You can...

Basic Operations
32
Correct manually (Quick Corner)
You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly
rectangular.
a
Press the  button to display menus
in the order  Settings - Keystone .
Remote control Control panel
b
Use the  button to select
Quick Corner , and then press the 
button. Press the  button again if
necessary.
The area selection screen is displayed.
c
Select the corner you want to correct
using the 
 buttons,
and then press the...

Basic Operations
33
Adjusting the Volume
You can adjust the volume by using the  buttons on the remote control or the  buttons
on the control panel.
Remote control Control panel
c
•You can also adjust the volume from the Configuration menu. s Settings  - Volume   p.68
•When an AV System is connected to  the projector and you want to adjust the volume for the AV system,
set  HDMI Link  to On and Audio Out Device  to AV System . 
s Settings  - HDMI Link   p.68
•You cannot adjust the volume of Bluetooth...

Adjusting the Image
34
Adjusting the Image
Selecting the Projection Quality (Color Mode)
You can obtain the optimum image qual ity to suit your surroundings when projecting. The brightness of the
image varies depending on the mode selected.
a
Press the  button.
c
•You can make settings from the Configuration menu. s  Image  - Color Mode   p.65
•If you press the  button, you can also make se ttings from the Home screen.s  p.26
b
Select  Color Mode .
Use the  buttons to select a mode, and then press the...

Adjusting the Image
35
Switching the Screen Between Full and Zoom (Aspect)
You can change the Aspect of the projected image.
Press the  button to displays menus in the following order.
Signal  - Aspect
Use the 
 buttons to select the item, and then
press the 
 button to confirm the selection.
You can select the following aspects according to  the input signal from the connected device.
Aspect Mode Explanation
Auto
Sets the aspect ratio automatically  according to the input signal and Resolution infor-...

Adjusting the Image
36
Detail EnhancementEnhances the contrast in an image to create a more emphatic texture
and material feel.
Depending on the image, a highlight may be noticeable at the border
between colors. If this bothers you, set a smaller value.
a
Press the  button to display menus
in the order  Image - Image
Enhancement .
b
Use the  buttons to
select the item you want to adjust, and
then press the 
 button to confirm
the selection.
c
Use the  buttons to make
adjustments.
Press the  b u t t o n...

Adjusting the Image
37
Frame Interpolation is available 
under the following conditions.
•When Image Processing  is set to Fine. s  Signal  - Advanced  - Image Processing   p.66
•When the source is HDMI1 or HDMI2.
•When inputting 2D signals or  3D signals (1080p 24 Hz). s  p.99
a
Press the  button.
c
You can make settings from the
Configuration menu. 
s Image  -
Frame Interpolation   p.65
b
Use the  buttons to
select the item, an d then press the
 button to confirm the selection. 

Adjusting the Image
38
Adjusting the Color
Adjusting the Color Temp.
You can adjust the overall tint of the image. Make adjustments if the image is a little too blue or too red and
so on.
Press the  button to displays menus in the following order.
Image  - Color Temp.  - Color Temp.
Use the 
 buttons to make adjustments.
Blue tints grow stronger as the value is increased, and red
tints grow stronger as the value is reduced.
c
Press the  button to return the adjustments to their default values.
Adjusting...

Adjusting the Image
39
a
Press the  button to display menus
in the order  Image - Advanced  -
RGBCMY .
b
Use the  buttons to
select the color you want to adjust,
and then press the 
 button to
confirm the selection.
c
Use the  buttons to
select Hue , Saturation , or
Brightness.
d
Use the  buttons to make
adjustments.
Press the  button to adjust another
color.
Press the 
 button to return the
adjustments to their default values.
e
Press the  button to exit the menu.
Adjusting the Gamma
You can adjust...