Epson Projector BrightLink Pro 1420Wi User Manual

							You see the main toolbar on the side and the projection control toolbar on the bottom of the
projected image.
3. To move the main toolbar to the other side of the screen, tap the arrow on the opposite side of the screen.
Note: You can use the pen or your finger (BrightLink Pro 1430Wi) to move the arrow icon up or
down to reposition the toolbar.
4. To switch to one of the other interactive modes, do one of the following: • To switch to whiteboard mode, select the Whiteboard tool.
• To switch to PC Interactive mode, select , then select .
Note: You can also press the Pen Modebutton on the remote control to switch between modes.
5. To close the main toolbar, select the icon at the bottom of the toolbar. Note: If you want to hide the toolbar automatically after drawing, select the icon at the bottom of
the toolbar.
221     
						

							6. To show or hide the projection control toolbar, select the arrow.
Parent topic:
Annotation Mode (PC Free)
Related references
The Main Annotation Toolbar
The Bottom Annotation Toolbar
Related tasks
Inserting a Document or Image From a Scanner
Inserting and Working With Images
Using the Annotation Toolbars You can use both pens at the same time in annotation mode.
1. Project an image from a connected device.
2. Turn on one of the pens and hover near or tap the projected image.You see the main toolbar and the bottom toolbar on the projected image, for example:
222   
						

							3. To move the main toolbar to the other side of the screen, select the arrow.
Note: You can use the pen to move the arrow icon up or down.
4. To switch to one of the other modes, do one of the following:
• To switch to whiteboard mode, select the Whiteboard tool.
• To switch to computer interactive mode, select , then select .
5. To close the main toolbar, select the icon at the bottom of the toolbar.
Note: If you want to hide the toolbar automatically after drawing, select the icon at the bottom of
the toolbar.
6. To show or hide the bottom toolbar, select the arrow.
Parent topic: Annotation Mode (PC Free)
Related concepts
Whiteboard Mode
Using BrightLink With a Computer
Annotation Mode (PC Free)
223    
						

							The Main Annotation Toolbar
The main annotation toolbar lets you draw and write on your projected image. The toolbar also lets you
easily switch to whiteboard or computer interactive mode.
Switch to annotation mode (PC free annotation)
Switch to whiteboard mode
Undo the last annotation 224     
						

							Redo the last undo
Change custom pen color and width
Write or draw free-form lines with custom pen
Change highlighter pen color
Write or draw free-form lines with transparent highlighter pen
Black pen (fine point on left, thick on right)
Red pen (fine point on left, thick on right)
Blue pen (fine point on left, thick on right)
Eraser (thin width on left, thick on right)
Clear all annotations
Hide the toolbar after each annotation
Close the toolbar
Switch modes. Select then to switch to computer interactive mode (PC
interactive). Select then to switch back to annotation mode (PC free annotation).
Parent topic: Annotation Mode (PC Free)
225                   
						

							Zooming Images in Annotation Mode
You can use the pen to zoom in on a portion of your image, the same as you can using the E-Zoom
button on the remote control.
1. Select the Zoom tool.
2. Do one of the following to adjust the image if necessary:
• Press and drag on the screen to pan around the enlarged area.
• Select the plus icon to enlarge the image.
• Select the minus icon to shrink the image.
• Select the x1 icon to return to the original size.
Parent topic: Annotation Mode (PC Free)
The Bottom Annotation Toolbar The bottom annotation toolbar lets you split the screen and capture, print, or save your images.
Capture the projected image. Switch to whiteboard mode to paste the image onto a new
page.
Print the projected image
Save the projected image in .png format
Select an input source
Zoom into the whiteboard
226        
						

							Stops projection and mutes audio. Touch the screen again to restore the image and sound.
Pauses video.
Split the screen and project two images. When the screen is split, select the tool again to
return to a single image.
Show or hide bottom toolbar
Parent topic: Annotation Mode (PC Free)
Related tasks
Printing in Annotation Mode
Saving Images in Annotation Mode
Printing in Annotation Mode You can print the projected image directly from the projector to a supported printer (USB or networked).
Make sure your printer meets the control command requirements for printing from the projector.
1. Press thePrintbutton on the control pad or remote control, or select the Print tool on the
bottom annotation toolbar.
2. Select the number of copies you want.
3. When you are ready, select Print.
Your page is printed on the default printer set up in the Print menu under the Whiteboard Settings
menu.
Parent topic: Annotation Mode (PC Free)
Related tasks
Selecting Whiteboard Print Settings
227      
						

							Saving Images in Annotation Mode
You can save your images as .png files in the default location set in the projectors menu system.
1. Press theSavebutton on the control pad or remote control, or select the Save tool on the
bottom annotation toolbar.
You see a confirmation message.
2. Select Yes.
Your image is named and saved automatically.
Parent topic: Annotation Mode (PC Free)
Related tasks
Selecting Settings for Saving Whiteboard Pages
Splitting the Screen You can split the screen and project from two sources at the same time. You can annotate and interact
with both sources.
1. Press theSplitbutton on the remote control or select the Split tool on the bottom toolbar.
The current image is reduced and appears on the left side of the projection surface.
2. Press the Source Select icon on the bottom toolbar.
228    
						

							You see a screen like this:
3. Select the two sources you want to display. Not all combinations of sources are valid. If you want to write on a blank screen, select any unused source. Unused sources display the color
selected in the Display Background setting. TheLogooption will display a blue background.
Note: You can also press the Menubutton on the remote control and select the Sourceoption to
select the two sources.
4. Press the Switch Source button to display the two sources.
5. Do any of the following as necessary: • To change to a different source at any time, press the Menubutton on the remote control and
select Source, or press the Select Source icon on the bottom toolbar.
• To annotate on the right screen, press the Menubutton on the remote control, select Target Pen
Mode, and select Screen Right. Set the Pen Modesetting toPC Free Annotation.
229   
						

							• To use PC interactive mode on the right screen, press the
Menubutton on the remote control,
select Target Pen Mode, and select Screen Right. Set thePen Modesetting toPC Interactive.
Note: If you select Video,USB1, or USB2as a source, you cannot use PC interactive mode.
• To reverse the left and right images, press the Menubutton on the remote control and select
Swap Screens.
• To make one image larger, press the Menubutton on the remote control, select Screen Size, and
select Larger Left orLarger Right.
6. To return to displaying one image, press the Escbutton on the remote control, or press the Split
Screen icon on the bottom toolbar.
Note: The following operations cannot be performed during split screen projection:
• Menu settings
• E-Zoom
• Switching aspect mode
• Operations made by the Userbutton on the remote control
• Auto Iris
• Light Optimizer
• Image Processing
• Freeze (if one screen is displaying the whiteboard)
Parent topic: Using the Interactive Features
230