Epson EPL N3000DTS User Manual

							328Technical Specifications
Laser safety
This printer is certified as a Class 1 laser product under the U.S. 
Department of Health and Human Services (DHHS) Radiation 
Performance Standard according to the Radiation Control for 
Health and Safety Act of 1968. This means that the printer does 
not produce hazardous laser radiation.
Since radiation emitted by the laser is completely confined within 
protective housings and external covers, the laser beam cannot 
escape from the machine during any phase of user operation.
CDRH regulations
The Center for Devices and Radiological Health (CDRH) of the 
U.S. Food and Drug Administration implemented regulations for 
laser products on August 2, 1976. Compliance is mandatory for 
products marketed in the United States. The label shown below 
indicates compliance with the CDRH regulations and must be 
attached to laser products marketed in the United States.
 
						

							Technical Specifications329
A
A
A
A
A
A
A
A
A
A
A
A
PostScript
Interfaces
Parallel interface
Use the IEEE 1284-I compliant parallel interface connector.
ECP mode/Nibble mode
USB interface
USB 1.1
Note:
Only computers equipped with a USB connector and running Windows 
Me, 98, XP, or 2000 support the USB interface.
Ethernet interface
You can use an IEEE 802.3 100BASE-TX/10 BASE-T 
straight-through shielded, twisted-pair interface cable with an 
RJ45 connector.Language Adobe PostScript 3
Emulation name in PJL: POSTSCRIPT
in EJL: PS
AppleTalk protocol Entity Type: LaserWriter
Emulation Type: POSTSCRIPT-00
 
						

							330Technical Specifications
Options and Consumable
550-Sheet Paper Cassette Unit A4
Product number: C12C802091
Paper size: A4, A5, B5, Letter, Legal, Government 
Letter, Executive, Government Legal, 
F4, Mon, Com #10, DL, C5, C6, ISO-B5
Paper weight: 60 to 216 g/m² (16 to 43.4 lb)
Paper feed: One paper cassette mounted
Automatic feed delivery system
Cassette capacity up to 550 sheets 
(64 g/m²) (Maximum height: 59.4 mm)
Paper types: Plain paper, thick paper, transparencies, 
envelopes
Power supply: DC 24V - 1A supplied by the printer
Power consumption: 3.3V - 0.1A
Dimensions and 
weight:
Height:
Width:
Depth:
Weight:143 mm (5.6 in.)
422 mm (16.6 in.)
455 mm (17.9 in.)
6.3 kg (13.2 lb)
 
						

							Technical Specifications331
A
A
A
A
A
A
A
A
A
A
A
A
Stacker
Duplex Unit
Product number: C12C802111
Output capacity: Up to 500 sheets
Paper  size: Regular or custom paper sizes within the 
following size:
Width: 89.90 - 215.90 mm
Length: 139.70 - 355.60 mm
However, when using custom size 
paper that is 76.2 mm to 89.9 mm wide 
and 127.0 mm to 139.7 mm long, the 
paper cannot be output to the Stacker so 
it is output to the face-down tray.
Paper types: Plain paper, thick paper
Power supply: DC 24V - 0.4A supplied by the printer
Power consumption: 3.3V - 0.2A
Dimensions and weight:
Height:
Width:
Depth:
Weight:227 mm (8.9 in.)
418 mm (16.5 in.)
313 mm (12.3 in.)
2.6 kg (5.7 lb)
Product number: C12C802101
 
						

							332Technical Specifications
Hard Disk Drive
*  This product conforms to CE marking requirements in accordance with EC Directive 89/336/EEC.
Memory modules (EPL-N3000 only)
Make sure that the DIMM you purchase is compatible with 
EPSON products. For details, contact the store where you 
purchased this printer or the EPSON sales company. Paper size: Regular paper sizes (excluding  envelopes)
Paper types: Plain paper, thick paper
Power supply: DC 24V - 0.4A supplied by the printer
Power consumption: 3.3V - 0.1A
Dimensions and weight: Height:
Width:
Depth:
Weight: 219 mm (8.6 in.)
352 mm (13.9 in.)
96 mm (3.8 in.)
1.9kg (4.2 lb)
Product number: C12C824061*
Capacity: 20 GB
Memory  size:  16 MB, 32 MB, 64 MB, 128 MB or  256 MB
 
						

							Technical Specifications333
A
A
A
A
A
A
A
A
A
A
A
A
Imaging cartridge
The actual number of pages you can print with an imaging 
cartridge varies depending on the type of printing.
Fuser Unit 120/220
* Product number varies by location. 
❏Service life may be shortened by repeatedly warming up the 
printer, or by frequently printing on envelopes, labels, thick 
paper, or transparencies. 
❏The actual number of pages you can print before replacing the 
fuser unit varies depending on the type of printing.  Product number: S051111
Storage temperature: 0 to 35 C (32 to 95 F)
Storage humidity: 15 to 80% RH
Life of factory-installed: Average of 6,000 pages of 
continuous printing
Life of replacement cartridges:
(under the conditions of A4 size 
paper, continuous printing, and 5% 
print ratio)Average of 17,000 pages of 
continuous printing
Product number*: S053016, S053017
Storage temperature: 0 to 35 C (32 to 95 F)
Storage humidity: 15 to 80% RH
Life:
(under the conditions of A4 size 
paper, continuous printing, and 
5% print ratio)Average of 200,000 pages of 
continuous printing
 
						

							334Technical Specifications
Safety Information
Warnings, Cautions, and Notes
w
Warnings
must be followed carefully to avoid bodily injury.
c
Cautions
must be observed to avoid damage to your equipment.
Notes 
contain important information and useful tips on the operation of your 
printer.
Safety Precautions
Be sure to follow these precautions carefully to ensure safe, 
efficient operation:
 
						

							Technical Specifications335
A
A
A
A
A
A
A
A
A
A
A
A
❏Because the printer weighs approximately 20.9 kg (46.1 lb) 
without the imaging cartridge installed, one person should 
not lift or carry it. Two people should carry the printer, lifting 
it by the correct positions as shown below.
❏Unless specifically instructed in this guide, be careful not to 
touch the fuser, which is marked CAUTION HOT SURFACE, 
or the surrounding areas. If the printer has been in use, the 
fuser and the surrounding areas may be very hot. If you must 
touch one of these areas, wait 40 minutes to allow the heat to 
subside before doing so.
Unless specifically instructed in this guide, do not insert your 
hand into the her, as it may be very hot.
 
						

							336Technical Specifications
*Unless specifically instructed in this guide, do not insert your hand into the her, as it may be 
very hot.
❏Do not insert your hand deep into the fuser unit, as some 
components are sharp and may cause injury.
❏Avoid touching the components inside the printer unless 
instructed to do so in this guide.
❏Never force the printer’s components into place. Although the 
printer is designed to be sturdy, rough handling can damage 
it.
❏When handling an imaging cartridge, always place them on 
a clean, smooth surface.
❏Do not attempt to modify an imaging cartridge or take them 
apart. They cannot be refilled.
❏Do not touch the toner. Keep the toner away from your eyes.
❏Do not dispose of used imaging cartridge and fuser unit in 
fire, as they can explode and cause injury. Dispose of them 
according to local regulations.
❏If toner is spilled, use a broom and dustpan or a damp cloth 
with soap and water to clean it up. Because the fine particles 
can cause a fire or explosion if they come into contact with a 
spark, do not use a vacuum cleaner.
❏Wait at least one hour before using an imaging cartridge after 
moving it from a cool to a warm environment to prevent 
damage from condensation.
❏Be sure to keep consumables out of the reach of children.
❏Do not leave jammed paper inside the printer. This can cause 
the printer to overheat.
❏Avoid sharing outlets with other appliances.
 
						

							Technical Specifications337
A
A
A
A
A
A
A
A
A
A
A
A
❏Use only an outlet that meets the power requirements of this 
printer.
Important Safety Instructions
❏Connect your printer to an electrical outlet that meets the 
power requirements of this printer. Your printer’s power 
requirements are indicated on a label attached to the printer. 
If you are not sure of the power supply specifications in your 
area, contact your local power company or consult your 
dealer.
❏If you are unable to insert the AC plug into the electrical 
outlet, contact an electrician.
❏Adjust only those controls that are covered by the operating 
instructions. Improper adjustment of other controls may 
result in damage that requires repair by a qualified service 
representative.
ENERGY STAR® Compliance
As an International ENERGY STAR® Partner, 
EPSON has determined that this product meets the 
International 
ENERGY STAR® Program guidelines 
for energy efficiency.
The International 
ENERGY STAR® Office Equipment Program 
is a voluntary partnership with the computer and office 
equipment industry to promote the introduction of 
energy-efficient personal computers, monitors, printers, fax 
machines, copiers, scanners, and multifunction devices, and  in 
an effort to reduce air pollution caused by power generation. 
Their standards and logos are uniform among participating 
nations.