Epson AcuLaser C3800N User Manual
Have a look at the manual Epson AcuLaser C3800N User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Using the Control Panel171 EPSON AcuLaser C3800 Users Guide Image Print Menu This menu allows you to print the image files stored in a USB memory. This menu appears only when the USB memory is connected to the USB Host interface and there is at least one file that has either a JPG or TIF extension. *1Setting you made is reset when the USB memory is removed or the printer is turned off. *2Default setting varies according to the country of purchase. *3Available only for the models with Duplex Unit. File Select Select files to print. Print Start Prints the selected files. Copies Designates the number of copies to be printed, from 1 through 999. Page Size Specifies the paper size for the image printing. Layout Config Specifies the print layout. This setting enables you to print multiple pages onto a single page. Duplex Specifies the duplex setting for the document printing. When Duplex Long is selected, duplex printing is done with long edge binding. When Duplex Short is selected, duplex printing is done with short edge binding. Item Settings (default in bold) File Select - Print Start - Copies *11 to 999 Page Size *1A4*2, LT*2, LGL Layout Config *1None, 2in1, 4in1, 8in1 Duplex *1 *3Simplex, Duplex Long, Duplex Short File Name Print *1Yes, No
Using the Control Panel172 EPSON AcuLaser C3800 Users Guide File Name Print Select whether or not to print file names. Tray Menu This menu allows you to specify the size and type of paper loaded in the MP tray. Accessing this menu also lets you check the size of the paper currently loaded in the lower paper cassettes. The paper type settings in this menu can also be made from your printer driver. Settings you make in your printer driver override these settings, so use your printer driver whenever you can. *1Default setting varies according to the country of purchase. *2Available only when the optional paper cassette unit is installed. MP Tray Size Select your paper size from this menu. Cassette 1 Size/Cassette 2 Size Displays the paper size loaded in the standard and optional paper cassettes. MP Type Lets you set the paper type loaded in the MP tray. Cassette 1 Type/Cassette 2 Type Lets you select the paper type loaded in the standard and optional lower cassettes. Item Settings (default in bold) MP Tray SizeA4 *1, A5, B5, LT*1, HLT, LGL, GLT, GLG, EXE, DL, C5, IB5 Cassette 1 Size/Cassette 2 Size *2A4, A5, B5, LT, LGL, GLG, EXE MP TypePlain, SemiThk, PrePrinted, Letterhead, Recycled, Color, Transprncy, Labels Cassette 1 Type/Cassette 2 Type *2Plain, SemiThk, PrePrinted, Letterhead, Recycled, Color
Using the Control Panel173 EPSON AcuLaser C3800 Users Guide Emulation Menu Use this menu to select the printer emulation mode. You can specify different emulations for each interface; in other words, for each computer you connect the printer to. Since each emulation mode has its own specific options, make settings in the ESCP2, FX, or I239X menu, as necessary. The settings you can choose from are the same for every interface. * Available only when an optional type-B interface card is installed. Printing Menu This menu allows you to make standard print settings, such as Page Size and Orientation, when printing from an application or operating system that does not support your printer driver. Be sure to use the printer driver to make these settings whenever you can, since settings made on your computer always override these settings. *1Default setting varies according to the country of purchase. *2Custom-size paper is 76.2 × 98.4 mm at the minimum and 220 × 355.6 mm at the maximum, but EPSON recommends printing on paper that is not wider than 215.9 mm. *3Not available in PS3 mode. *4Not available in PS3 and PCL mode. Item Settings (default in bold) USBAuto, ESCP2, FX, I239X, PS3, PCL NetworkAuto, ESCP2, FX, I239X, PS3, PCL AUX *Auto, ESCP2, FX, I239X, PS3, PCL Item Settings (default in bold) Page SizeA4 *1, A5, B5, LT*1, HLT, LGL, GLT, GLG, EXE, DL, C5, IB5, CTM*2 Wide A4*3Off, On OrientationPort, Land Resolution 300, 600, 1200 RITechOn, Off Toner SaveOff, On Image Optimum *4Auto, Off, On Top Offset -99.0 ... 0.0 ... 99.0 mm in 0.5 increments LeftOffset -99.0 ... 0.0 ... 99.0 mm in 0.5 increments T Offset B -99.0 ... 0.0 ... 99.0 mm in 0.5 increments L Offset B -99.0 ... 0.0 ... 99.0 mm in 0.5 increments
Using the Control Panel174 EPSON AcuLaser C3800 Users Guide Page Size Specifies the paper size. Wide A4 Selecting On decreases the left and right margins from 4 mm to 3.4 mm. Orientation Specifies whether the page is printed in portrait or landscape orientation. Resolution Specifies the printing resolution. RITech Turning RITech on produces smoother and crisper lines, text, and graphics. Toner Save When this setting is selected, the printer saves toner by substituting a gray shade for the black inside of characters. The characters are outlined in full black on the right and lower edges. Image Optimum When this mode is on, the quality of graphics is reduced. It reduces the amount of graphics data when the data reaches the memory limit, allowing complex documents to be printed. Top Offset Makes fine adjustments to the vertical printing position of the page. c Caution: Make sure that the printed image does not extend beyond the edge of the paper. Otherwise, you may damage the printer. Left Offset Makes fine adjustments to the horizontal printing position of the page. This is useful for fine adjustments. c Caution: Make sure that the printed image does not extend beyond the edge of the paper. Otherwise, you may damage the printer.
Using the Control Panel175 EPSON AcuLaser C3800 Users Guide T Offset B Adjusts the vertical printing position on the back of the paper when printing on both sides. Use this if the printout on the back is not where you expected. L Offset B Adjusts the horizontal printing position on the back of the paper when printing on both sides. Use this if the printout on the back is not where you expected. Setup Menu This menu allows you to make various basic configuration settings related to paper sources, feeding modes, and error handling. You can also use this menu to select the LCD panel display language. Item Settings (default in bold) LanguageEnglish, Français, Deutsch, Italiano, ESPAÑOL, SVENSKA, Dansk, Nederlands, SUOMI, Português, Norsk, , , , , Time to Sleep 5, 15, 30, 60, 120 Min Time Out 0, 5 to 60 to 300 in increments of 1 Paper SourceAuto, MP, Cassette 1, Cassette 2 *1 MP ModeNormal, Last Manual FeedOff, 1st page, Each Page Copies1 to 999 Duplex *2 *3Off, On Binding *2 *3Long Edge, Short Edge Start Page *2 *3Front, Back Paper TypeNormal, SemiThk, Thick, ExtraThk, Transparency, Coated Page SideFront, Back Skip Blank Page *4Off, On Auto Eject Page *5Off, On Size IgnoreOff, On Auto ContOff, On Page Protect *4Auto, On Convert to B/W *6On, Off LCD Contrast 0 to 7 to 15
Using the Control Panel176 EPSON AcuLaser C3800 Users Guide *1Available only when the optional paper cassette unit is installed. *2Available only for the models with Duplex Unit. *3Available only when you use A4, A5, B5, LT, LGL, EXE, or GLG size paper. *4Available only for ESC/Page, ESC/P2, FX, or I239X mode. *5Not available for models with Duplex Unit. *6After this setting is changed, the printer will automatically reboot and the new setting takes effect. *7After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again. Language Specifies the language displayed on the LCD panel and that printed on the status sheet. Time to Sleep Specifies the length of time until the printer enters the sleep mode if there are no button operations. Time Out Specifies the length of the time, in seconds, before a time out when interfaces are being switched automatically. The time before a time out occurs is the length of time from the point when no data is being received from an interface until the point of switching the interface. If the printer has a print job when switching the interface, the printer prints the print job. Paper Source Specifies whether paper feeds into the printer from the MP tray or the optional paper cassette unit. If you select Auto, paper feeds from the paper source containing paper that matches your Paper Size setting. If an envelope size (DL, C5, IB5) is selected as the Page Size setting, paper always feeds from the MP tray. If you select Thick, ExtraThk, or Trnsprncy as the Paper Type setting, paper always feeds from the MP tray. MP Mode This setting determines whether the MP tray has the highest or lowest priority when Auto is selected as the Paper Source setting in the printer driver. When Normal is selected as the MP Mode, the MP tray has the highest priority as the paper source. If you select Last, the MP tray has the lowest priority. RAM Disk*7Off, Normal, Maximum
Using the Control Panel177 EPSON AcuLaser C3800 Users Guide Manual Feed Allows you to select the manual feed mode for the MP tray. Copies Designates the number of copies to be printed, from 1 through 999. Duplex Turns duplex printing on or off. This allows you to print on both sides of a page. Binding Specifies the binding direction of the printout. Start Page Specifies whether printing starts from the front or back of the page. Paper Type Specifies the type of paper to be used for printing. The printer adjusts the printing speed according to this setting. The printing speed is reduced when Thick, Extra Thk, or Trnsprnc is selected. Page Side Select Front when printing on the front of plain paper (Plain), semi-thick paper (Semi-Thick), or thick paper (Thick). Select Back when printing on the back of plain paper (Plain (Back)), semi-thick paper (Semi-Thick (Back)), or thick paper (Thick (Back)). Skip Blank Page Enables you to skip blank pages when printing. This setting is available when you print in the ESC/Page, ESCP2, FX, or I239X mode. Auto Eject Page Specifies whether or not to eject paper when the limit specified in the Time Out setting is reached. The default is Off, which means paper is not ejected when the time-out limit is reached.
Using the Control Panel178 EPSON AcuLaser C3800 Users Guide Size Ignore If you want to ignore a paper size error, select On. When you turn this item on, the printer keeps printing even if the image size exceeds the printable area for the specified paper size. This may cause smudges because of the toner that is not transferred onto the paper properly. When this item is turned off, the printer stops printing if a paper size error occurs. Auto Cont When you turn this setting on, the printer automatically continues printing after a certain period of time when one of the following errors occurs: Paper Set, Print Overrun, or Mem Overflow. When this option is off, you must press the NStart/Stop button to resume printing. Page Protect Allocates additional printer memory for printing data, as opposed to receiving it. You may need to turn this setting on if you are printing a very complex page. If a Print Overrun error message appears on the LCD panel during printing, turn this setting on and reprint your data. This reduces the amount of memory reserved for processing data so your computer may take longer to send the print job, but it will allow you to print complex jobs. Page Protect usually works best when Auto is selected. You will need to increase your printer’s memory if memory errors continue to occur. Note: Changing the Page Protect setting reconfigures the printer’s memory, which causes any downloaded fonts to be deleted. Convert to B/W If this item is set to On and any color imaging cartridges are at the end of their service lives when the printer receives a job, you can print the color data with the black imaging cartridge by pressing the NStart/Stop button. LCD Contrast Adjusts the contrast of the LCD panel. Use the uUp and dDown buttons to set the contrast between 0 (lowest contrast) and 15 (highest contrast.) RAM Disk Specifies the RAM disk size that is available for the reserve job function. If you select Maximum, all of the additional RAM disk capacity can be used for storage. If you select Normal, 50 percent of the additional RAM disk capacity can be used for storage. If you select Maximum or Normal but the optional RAM disk is not installed, 16 MB of the RAM disk capacity is used for storage. If you select Off, RAM disk cannot be used to reserve jobs.
Using the Control Panel179 EPSON AcuLaser C3800 Users Guide Color Regist Menu This menu allows you to make color registration settings. AdjustColorRegist Automatically adjusts the registration position of each color relative to black. Reset Menu This menu allows you to cancel printing and reset the printer settings. Clear Warning Clears warning messages that show errors except for these that occur from consumable products or mandatory-replacement parts. Clear All Warnings Clears all warning messages that appear on the LCD panel. Reset Stops printing and clears the current job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully. Reset All Stops printing, clears the printer memory, and restores the printer settings to their default values. The print jobs received from all interfaces are erased. Note: Performing Reset All clears print jobs received from all interfaces. Be careful not to interrupt someone else’s job. SelecType Init Restores the control panel menu settings to their default values. Item Settings (default in bold) AdjustColorRegist -
Using the Control Panel180 EPSON AcuLaser C3800 Users Guide Quick Print Job Menu This menu allows you to print or delete print jobs that were stored in the printer’s memory using the Quick Print Job feature (Re-Print Job and Verify Job) of the printer driver’s Reserve Job function. For instructions on using this menu, see Using the Quick Print Job Menu on page 203. Confidential Job Menu This menu allows you to print or delete print jobs stored in the printer’s memory using the Confidential Job feature of the printer driver’s Reserve Job function. You need to enter the correct password to access this data. For instructions on using this menu, see Using the Confidential Job Menu on page 204. USB Menu These settings control communication between the printer and the computer when using the USB interface. *1After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again. While it is reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is turned on again. *2Available only when USB I/F is set to On. *3Available only when a USB external device with D4 support is connected. The contents of the settings depend on the USB external device settings. *4If the Get IPAddress setting is set to Auto, this setting cannot be changed. Item Settings (default in bold) USB I/F *1On, Off USB Speed *1*2HS, FS Get IP Address *2*3Panel, Auto, PING IP *3*4*50.0.0.0 to 255.255.255.255 SM *30.0.0.0 to 255.255.255.255 GW *30.0.0.0 to 255.255.255.255 NetWare *3On, Off AppleTalk *3On, Off MS Network *3On, Off Bonjour *3On, Off USB Ext I/F Init *2*3- Buffer Size *1*2Normal, Maximum, Minimum