Epson AcuLaser C3800N User Manual

							Using the Printer Software with Macintosh121
EPSON AcuLaser C3800 Users Guide
5. Type the file name in the Name box, then click Save.
Note:
❏To edit the saved text watermark, select it from the List box, then click Edit Text. After 
editing, be sure to click OK to close the dialog box.
❏To remove the saved text watermark, select it from the List box, then click Delete. After 
removing it, be sure to click Save to close the dialog box.
6. Select a custom watermark, that has been saved, from the Watermark drop-down list 
on the Watermark Setting dialog box, and then click OK.
 
						

							Using the Printer Software with Macintosh122
EPSON AcuLaser C3800 Users Guide
To make a bitmap watermark
Before making a custom watermark, you should prepare a bitmap (PICT) file.
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select the Basic Settings tab.
3. Click Stamp Function.
4. Select the Watermark check box, then click Watermark Settings.
 
						

							Using the Printer Software with Macintosh123
EPSON AcuLaser C3800 Users Guide
5. Click New/Delete.
6. Click Add PICT on the User Stamp Setting dialog box.
7. Select the PICT file, then click Open.
 
						

							Using the Printer Software with Macintosh124
EPSON AcuLaser C3800 Users Guide
8. Type the file name in the Watermark box, then click Save.
Note:
To remove the saved text watermark, select it from the List box, then click Mark Delete. After 
removing it, be sure to click Save to close the dialog box.
9. Select the saved custom watermark from the Watermark drop-down list on the 
Watermark Setting dialog box, then click OK.
For Mac OS 9 users
1. Click the Layout icon on the Basic Settings dialog box. The Layout dialog box 
appears.
2. Select the Watermark Settings check box, then click New/Delete. The Custom 
Watermark dialog box appears.
 
						

							Using the Printer Software with Macintosh125
EPSON AcuLaser C3800 Users Guide
3. Click Add PICT on the Custom watermark dialog box.
4. Select the PICT file, then click Open.
5. Type the file name in the Name box, then click Save.
Note:
To remove the saved watermark, select it from the List box, then click Delete. After removing it, 
be sure to click Save to close the dialog box.
6. Select the saved custom watermark from the Watermark drop-down list on the Layout 
dialog box, then click OK.
 
						

							Using the Printer Software with Macintosh126
EPSON AcuLaser C3800 Users Guide
Using headers and footers
You can print a header or footer on the top or bottom of a page. The items that can be 
printed as a header or footer include user name, computer name, date, date/time, or collate 
number.
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select Basic Settings tab.
3. Click Stamp Function.
4. Select the Header/Footer check box, then click Header/Footer Settings.
 
						

							Using the Printer Software with Macintosh127
EPSON AcuLaser C3800 Users Guide
5. Select the items to be printed for the header and the footer from the drop-down list.
Note:
If you select Collate Number from the drop-down list, the number of copies is printed.
6. Click OK to apply the settings.
For Mac OS 9 users
1. Click the Layout icon on the Basic Settings dialog box. The Layout dialog box 
appears.
2. Select the Header/Footer check box, then click Header/Footer Settings.
3. Select the items to be printed for the header and the footer from the drop-down list.
 
						

							Using the Printer Software with Macintosh128
EPSON AcuLaser C3800 Users Guide
Note:
If you select Collate Number from the drop-down list, the number of copies is printed.
4. Click OK to apply the settings and return to the Layout dialog box.
Duplex printing
Duplex printing prints on both sides of the paper. You can also do duplex printing manually 
without using the Duplex Unit. When printing for binding, the binding edge can be specified 
as required to produce the desired page order.
Printing with the Duplex Unit (models with Duplex Unit only)
Follow the steps below to print with the Duplex Unit.
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select Basic Settings tab.
3. Click Duplex check box, select a Binding position from Left, Top, or Right.
4. Click the Duplex Settings button.
5. Specify the Binding Margin for the front and back sides of the paper.
6. Select whether the front or back side of the paper is to be printed as the Start Page.
7. Click Print to start printing.
 
						

							Using the Printer Software with Macintosh129
EPSON AcuLaser C3800 Users Guide
For Mac OS 9 users
1. Click the Layout icon on the Basic Settings dialog box. The Layout dialog box 
appears.
2. Select the Duplex check box.
3. Select a Binding position from Left, Top, or Right.
4. Click Duplex Settings to open the Duplex Settings dialog box.
5. Specify the Binding Margin for the front and back sides of the paper.
6. Select whether the front or back side of the paper is to be printed as the Start Page.
7. Click OK to apply the settings and return to the Layout dialog box.
Doing duplex printing manually (models without Duplex Unit only)
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select the Basic settings tab.
3. Select the Duplex (Manual) check box, then click Duplex Settings.
4. Select a Binding position from Left, Top, or Right.
 
						

							Using the Printer Software with Macintosh130
EPSON AcuLaser C3800 Users Guide
5. Specify the Binding Margin for the front and back sides of the paper.
6. Select whether the front or back side of the paper is to be printed as the Start Page.
7. Click Print to start printing. 
8. After printing on one side, reload the paper into the MP tray with the printed surface 
face-up as shown below. Then press the NStart/Stop button.
Note:
Straighten the paper before loading it. If curled paper is loaded, it may not feed correctly.
For Mac OS 9 users
1. Click the Layout icon on the Basic Settings dialog box. The Layout dialog box 
appears.
2. Select the Duplex (Manual) check box, then click Duplex Settings.
3. Select a Binding position from Left, Top, or Right.
4. Click Duplex Settings to open the Duplex Settings dialog box.