Digital Projection Titan Sx+ 3d, Dual 3d, Titan Sx+ 3d, Dual 3d Ultra Contrast User Manual

Rev C  April 2011 Page 4.21
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 Some  menu controls can be 
accessed directly using the 
control keys (see earlier in this 
section).
 For more information about 
input modes and input presets, 
see earlier in this section,  Input 
modes and settings.
  The lens settings are the only...

Page 4.22 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 Some  menu controls can be 
accessed directly using the 
control keys (see earlier in this 
section).
 
Input Menu 
  Presets 
    Save Presets A ~ H
 The lens settings, ie Focus 
position, Zoom position and 
Shift, are included only for the 
first ten...

Rev C  April 2011 Page 4.23
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 
Input Menu 
 Presets 
    Delete Presets A ~ H
Delete presets
Press  and   to select Delete Preset.
 Press  to open the Delete Presets A ~ H submenu.
To delete a saved set of parameters, press  and   to select one of the 
Presets.
 For Presets J to S,...

Page 4.24 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 Some  menu controls can be 
accessed directly using the 
control keys (see earlier in this 
section).
 When using the menus, press 
OSD  or  to hide or 
reveal the On-Screen-Display.
 
Picture Menu
 Some menu items may be 
greyed out - unavailable due to...

Rev C  April 2011 Page 4.25
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 For more information about 
User gamma settings, see 
section 5. Userware .
 Parametric Gamma adjustment 
is available only when 
Parametric  is selected in 
Gamma selection, above.
 Phase adjustment can be 
found in both the Picture and 
Geometry menus,...

Page 4.26 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 Aspect Ratio selection can be 
found in both the Picture and 
Geometry menus.
 When User Aspect  is selected, 
the Aspect Ratio settings are 
taken from the User H Aspect  
and V Aspect settings made in 
the Geometry menu.
 Aspect Ratio selection is NOT...

Rev C  April 2011 Page 4.27
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 Some  menu controls can be 
accessed directly using the 
control keys (see earlier in this 
section).
 When using the menus, press 
OSD  or  to hide or 
reveal the On-Screen-Display.
 
Geometry Menu
 None of the Geometry controls 
are available for Input...

Page 4.28 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 None of the Geometry controls 
are available for Input 8.
 Horizontal and Vertical 
Aspect Ratio adjustments are 
available only when  User is 
selected in  Aspect Ratio, (see 
previous page).
  WUXGA models only: 
The full height of the DMD can 
be used...

Rev C  April 2011 Page 4.29
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 None of the Geometry controls 
are available for Input 8.
 
Geometry Menu 
  Resolution
 Input Detection  should 
normally be set to Automatic. 
However, if the incoming video 
signal is non-standard, the 
projector may not be able to 
select an appropriate...

Page 4.30 Rev C  April 2011
4. Controlling the projector Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
When Input Detection is set to Custom:
Press  and   to select one of the adjustment sliders.
 Press  and   to adjust the slider to match the resolution of the incoming 
video signal.
Blanking
Blanking curtains can be applied to each edge of the picture.
Press 
 and...