Home
>
Digital Projection
>
Projector
>
Digital Projection Titan Sx+ 3d, Dual 3d, Titan Sx+ 3d, Dual 3d Ultra Contrast User Manual
Digital Projection Titan Sx+ 3d, Dual 3d, Titan Sx+ 3d, Dual 3d Ultra Contrast User Manual
Here you can view all the pages of manual Digital Projection Titan Sx+ 3d, Dual 3d, Titan Sx+ 3d, Dual 3d Ultra Contrast User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
Rev C April 2011 Page 4.1
4. Controlling the projector
Contents
Overview ........................................................................\
.......................................................................4.5
Controlling the projector........................................................................\
.............................................4.5
Input modes and settings ........................................................................\...](http://img.usermanuals.tech/thumb/5761/87914/w300_digital-projection-titan-sx+-3d-l-manual_d-50.png "Page 51
Rev C April 2011 Page 4.1
4. Controlling the projector
Contents
Overview ........................................................................\
.......................................................................4.5
Controlling the projector........................................................................\
.............................................4.5
Input modes and settings ........................................................................\...")
Rev C April 2011 Page 4.1 4. Controlling the projector Contents Overview ........................................................................\ .......................................................................4.5 Controlling the projector........................................................................\ .............................................4.5 Input modes and settings ........................................................................\...
Page 52
![Page 52
Page 4.2 Rev C April 2011
4. Controlling the projector Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Picture settings ........................................................................\
.......................................................4.15
Geometry settings ........................................................................\...](http://img.usermanuals.tech/thumb/5761/87914/w300_digital-projection-titan-sx+-3d-l-manual_d-51.png "Page 52
Page 4.2 Rev C April 2011
4. Controlling the projector Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Picture settings ........................................................................\
.......................................................4.15
Geometry settings ........................................................................\...")
Page 53
![Page 53
Rev C April 2011 Page 4.3
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Colour menu ........................................................................\
..............................................................4.31
Colour Mode........................................................................\...](http://img.usermanuals.tech/thumb/5761/87914/w300_digital-projection-titan-sx+-3d-l-manual_d-52.png "Page 53
Rev C April 2011 Page 4.3
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Colour menu ........................................................................\
..............................................................4.31
Colour Mode........................................................................\...")
Rev C April 2011 Page 4.3 Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview . Colour menu ........................................................................\ ..............................................................4.31 Colour Mode........................................................................\...
Page 54
![Page 54
Page 4.4 Rev C April 2011
4. Controlling the projector Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
On Screen Display ........................................................................\
..................................................4.47
OSD Position ........................................................................\...](http://img.usermanuals.tech/thumb/5761/87914/w300_digital-projection-titan-sx+-3d-l-manual_d-53.png "Page 54
Page 4.4 Rev C April 2011
4. Controlling the projector Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
On Screen Display ........................................................................\
..................................................4.47
OSD Position ........................................................................\...")
Page 55
![Page 55
Rev C April 2011 Page 4.5
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Overview
Controlling the projector
The projector can be controlled from:
the remote control
the keypad
the RS232 input
the Ethernet input
For more information about controlling the projector using the RS232 and\
Ethernet inputs, see Remote communications protocol...](http://img.usermanuals.tech/thumb/5761/87914/w300_digital-projection-titan-sx+-3d-l-manual_d-54.png "Page 55
Rev C April 2011 Page 4.5
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Overview
Controlling the projector
The projector can be controlled from:
the remote control
the keypad
the RS232 input
the Ethernet input
For more information about controlling the projector using the RS232 and\
Ethernet inputs, see Remote communications protocol...")
Rev C April 2011 Page 4.5 Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview . Overview Controlling the projector The projector can be controlled from: the remote control the keypad the RS232 input the Ethernet input For more information about controlling the projector using the RS232 and\ Ethernet inputs, see Remote communications protocol...
Page 56
![Page 56
Page 4.6 Rev C April 2011
4. Controlling the projector Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Input modes and settings
Input mode detection
The projector can automatically detect the following parameters from the\
incoming
video signal:
line frequency
frame rate
interlace / progressive
From these parameters the projector can determine input mode, for...](http://img.usermanuals.tech/thumb/5761/87914/w300_digital-projection-titan-sx+-3d-l-manual_d-55.png "Page 56
Page 4.6 Rev C April 2011
4. Controlling the projector Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Input modes and settings
Input mode detection
The projector can automatically detect the following parameters from the\
incoming
video signal:
line frequency
frame rate
interlace / progressive
From these parameters the projector can determine input mode, for...")
Page 57
![Page 57
Rev C April 2011 Page 4.7
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Any subsequent changes that you make to the modal settings will be saved\
in the
mode history, with the input mode.
If a new signal is detected, the mode history for the previous signal wi\
ll be saved in
the mode history, and the new mode added, along with a...](http://img.usermanuals.tech/thumb/5761/87914/w300_digital-projection-titan-sx+-3d-l-manual_d-56.png "Page 57
Rev C April 2011 Page 4.7
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Any subsequent changes that you make to the modal settings will be saved\
in the
mode history, with the input mode.
If a new signal is detected, the mode history for the previous signal wi\
ll be saved in
the mode history, and the new mode added, along with a...")
Rev C April 2011 Page 4.7 Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview . Any subsequent changes that you make to the modal settings will be saved\ in the mode history, with the input mode. If a new signal is detected, the mode history for the previous signal wi\ ll be saved in the mode history, and the new mode added, along with a...
Page 58
![Page 58
Page 4.8 Rev C April 2011
4. Controlling the projector Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Special considerations when using Input 8
Differences between Input 8 and Inputs 1-7
Input 8 has been designed to offer the user access to a very high bandwidth digital
video path, free of the limitations inherent to standard image processin\
g techniques.
As...](http://img.usermanuals.tech/thumb/5761/87914/w300_digital-projection-titan-sx+-3d-l-manual_d-57.png "Page 58
Page 4.8 Rev C April 2011
4. Controlling the projector Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Special considerations when using Input 8
Differences between Input 8 and Inputs 1-7
Input 8 has been designed to offer the user access to a very high bandwidth digital
video path, free of the limitations inherent to standard image processin\
g techniques.
As...")
Page 59
![Page 59
Rev C April 2011 Page 4.9
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
There are more indicators on
the Control panel, and these are
described on the next page.
Input 8 and 3D may not be
present on some models
Indicators
Input status indicators
The indicator next to each input connector on the rear input panel will \
light...](http://img.usermanuals.tech/thumb/5761/87914/w300_digital-projection-titan-sx+-3d-l-manual_d-58.png "Page 59
Rev C April 2011 Page 4.9
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector
For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
There are more indicators on
the Control panel, and these are
described on the next page.
Input 8 and 3D may not be
present on some models
Indicators
Input status indicators
The indicator next to each input connector on the rear input panel will \
light...")
Rev C April 2011 Page 4.9 Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 4. Controlling the projector For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview . Notes There are more indicators on the Control panel, and these are described on the next page. Input 8 and 3D may not be present on some models Indicators Input status indicators The indicator next to each input connector on the rear input panel will \ light...
Page 60
