Digital Projection Titan Sx+ 3d, Dual 3d, Titan Sx+ 3d, Dual 3d Ultra Contrast User Manual

Rev C  April 2011 Page 2.17
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 2. Installation
Input format, DVI input 3
Single DVI-D
Sources upto 1400x1050 resolution; 8 bits per colour; 24- 60Hz.
Input formats, DVI input 8
Single DVI-D
Sources upto 1400x1050 resolution; 8 bits per colour; 24- 60Hz.
(Use MAIN input only)
Dual DVI-D
An input with increased frame rate.
Sources upto 1400x1050 resolution; 8 bits per colour; 24-120Hz.
(Use MAIN input only)
Twin Link (Twin Single DVI-D)
One...

Page 2.18 Rev C  April 2011
2. Installation Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
DVI Input connection examples
Input and processing architecture
 EDID handshaking on the DVI and rGB2 inputs
If you are using a computer DVI card or other source that obeys the EDID\
 
handshaking protocol, then the card or source will automatically configu\
re itself to 
suit the projector.
If not, then you should refer to the documentation supplied with the sou\
rce to 
manually set the...

Rev C  April 2011 Page 2.19
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 2. Installation
Notes
 For important information about 
how Input 8 is used, see INPUT 
8 in the Notes column, and also 
Section 4, Overview.
Projector
3D server
Z screen or  3D glasses
Inputs 1-7
Sync
Video
Sync out
Sync in
Projector
3D server
Z screen or  3D glasses
Input 8
Sync
Video
Sync out
Sync in
3D connection examples
3D sources up to 60Hz, requiring frame doubling and left/right 
interleaving
3D...

Page 2.20 Rev C  April 2011
2. Installation Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
Notes
 For more information about pin 
connections and control codes 
see section 7. Appendix.
 For more information about 
using a browser to control the 
projector see  section 4. Using 
the menus.
Computer Null-modem  
cable
Control connection examples
LAN connection
All of the projector’s features can be controlled via a LAN connection, using a 
standard internet browser package such as...

Rev C  April 2011 Page 2.21
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 2. Installation
Notes
 Use only the power cable 
provided.
 Ensure that the power 
outlet includes a Ground 
connection, as this 
equipment MUST be earthed.
 Handle the power cable 
carefully and avoid sharp 
bends. Do not use a damaged 
power cable.
Power connection
When mains power is first applied, the projector will perform a self-tes\
t, then go into 
Standby mode.
The Power indicator on the control...

Page 2.22 Rev C  April 2011
2. Installation Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 

Rev C  April 2011 Page 3.1
3. Getting Started
Contents
Switching the projector on ........................................................................\
.......................................3.2
Selecting an input or test pattern ........................................................................\
...........................3.2
Input ........................................................................\
........................................................................3.2
Test pattern...

Page 3.2 Rev C  April 2011
3. Getting Started Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
Selecting an input or test pattern
Input
Press  or   to change to the next input up or down the following list:
1. RGB1
2. RGB2
3. DVI (Single)
4. SDI
5. Composite Video
6. S-Video
7. Component
8. DVI (Single/Dual/Twin pixel-mapped)
Or press the numbered keys 1–8 to change directly to the input:
Test pattern
 If you have no video source connected to the projector, then you can display a test...

Rev C  April 2011 Page 3.3
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 3. Getting Started
Notes
 Each time a new lens is 
fitted to the projector, 
the calibration procedure 
must be carried out. See 
Setup menu, in Section 4. 
Controlling the projector.
  For more detailed information 
about:
  - using the control keys on the 
remote control or keypad,
 - using the menus,
 see the next section: 
Controlling the projector .
 When any of the three Lens 
adjustment keys is pressed,...

Page 3.4 Rev C  April 2011
3. Getting Started Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
Adjusting the projected image
Picture settings
Press a  key, followed by  and   to adjust these picture settings:
 Brightness    BRI 
Contrast    CON 
Saturation    SAT 
Phase    PHASE 
Aspect ratio    ASPECT
Geometry settings
Press Keystone  KEYST
followed by  and  to adjust the keystone correction.
Press Position   POS  (for all inputs except DVI)
followed by , ,  and  to adjust the...