Digital Projection Projector HIGHlite Cine 330 3D Series User Manual

page 43
Operating Guide
MENU MAP
Menu Map
Menu Sub-menus and settings
MAIN
Aspect Ratio 16:9, Theaterscope, 4:3, 4:3 Narrow, 16:10, 5:4, Native
Presets
Recall A, B, C, D, Default
Save A,, B, C, D
Overscan Of f, Crop, Zoom
3D Control
3D Format Of f, Auto, Side by Side (Half), Top and Bottom, Dual-Pipe, Frame Sequential
3D Swap Normal, Reverse
Dark Time 0.65 ms, 1.3 ms, 1.95 ms, 2.5 ms
Sync Delay value between -3.0 ms and 3.0 ms (0.0 ms)
Input Select HDMI 1, HDMI 2, RGB, COMP 1, COMP 2
Resync executable...

page 44
Operating Guide
MENU MAP
Menu Sub-menus and settings
ADVANCED IMAGE
Colorspace Auto, YPbPr, YCbCr, RGB PC, RGB Video
Gamma CRT (2.5), Film (2.2), Video, Punch (2.0), Graphics
Color Temperature 5500, 6500, 7500, 9300, Native
Color Gamut Auto, REC709, SMPTE-C, EBU, Native
Dynamic Black Of f, On
Adaptive Contrast Of f, On
RGB Adjust
Red Offset value between 0 and 200 (10 0)
Green Offset value between 0 and 200 (10 0)
Blue Offset value between 0 and 200 (10 0)
Red Gain value between 0 and 200 (10 0)...

page 45
Operating Guide
MENU MAP
Menu Sub-menus and settings 
SYSTEM
OSD Settings
Menu Position Left-Upper, Right-Upper, Left-Bottom, Right-Bottom, Center
Menu Transparency 0%, 25%, 50%, 75%
Time Out Always On, 10 sec, 30 sec, 60 sec
Message Box Off, On
Blank Screen Splash, Black, Blue, White
Auto Power Off Off, On)
Auto Power On Off, On)
Projection Mode Front Tabletop, Front Ceiling, Rear Tabletop, Rear Ceiling
Startup Splash Off, On
Altitude High, Auto
Lamp Power Economy, Standard
CONTROL
Trigger 1...

Operating Guide
   
    
Digital Projection HIGHlite Cine 330 3D Series 
This page is intentionally left blank.  

REMOTE COMMUNICATIONS GUIDE4 
Rev E August 2014 
HIGHlite Cine 330 3D Series
 High Brightness Digital Video Projector  

Remote Communications Guide
IN THIS GUIDE
IN THIS GUIDE
Introduction ........................................................................\
...........................49
Examples......................................................................................................49
The Operation Commands ...................................................................50
Main menu....................................................................................................50
Image menu...

page 49
Remote Communications Guide
INTRODUCTION
Introduction
The projector can be controlled by using an external control system or a\
 PC via an RS232 or LAN interface, using a terminal-emulation 
program, such as HyperTerminal.
Operation commands are used to simulate menu operations and determine th\
e settings of the projector, and use the following format:
• All commands consist of ASCII text strings starting with the letters ‘op’, and ending with\
 an ASCII Carriage Return character: 
op   [CR]
•...

page 50
Remote Communications Guide
THE OPERATION COMMANDS
The Operation Commands

Main menu
aspect= ?0 = 16:9 
1 = TheaterScope 
2 = 4:3 
3 = 4:3 Narrow 
4 = 16:10 
5 = 5:4 
6 = Native
recall.mem= ?0 = Preset A 
1 = Preset B 
2 = Preset C 
3 = Preset D 
4 = Default
save.mem=0 = Preset A 
1 = Preset B 
2 = Preset C 
3 = Preset D
overscan= ?0 = Off 
1 = Crop 
2 = Zoom
s3d.inputtype= ?0 = Off 
1  = Auto 
2 = Side by Side (Half) 
3 = Top and Bottom 
4 = Dual-Pipe 
5 = Frame Sequential
s3d.chswap= ?0 =...

page 51
Remote Communications Guide
THE OPERATION COMMANDS

s3d.syncdelay= ?0 - 60
input= ?0 = HDMI 1 
1 = HDMI 2 
2 = RGB 
3 = Component 1 
4 = Component 2
resync(none)(none)
Image menu
brightness= ? + -0 - 200
contrast= ? + -0 - 200
saturation= ? + -0 - 200
hue= ? + -0 - 200
sharpness= ? + -0 - 200
nr= ? + -0 - 200
Advanced Image menu
color.space= ?0  = Auto 
1 = YPbPr 
2 = YCbCr 
3 = RGB-PC 
4 = RGB-Video
gamma= ?0 = CRT 
1 = Film 
2 = Video 
3 = Punch 
4 = Graphics
color.temp= ?0 = 5500K 
1 = 6500K...

page 52
Remote Communications Guide
THE OPERATION COMMANDS

color.gamut= ?0  = Auto 
1 = REC709 
2 = SMPTE C 
3 = EBU 
4 = Native
db= ?0 = Off 
1 = On
adcontrast= ?0 = Off 
1 = On
red.offset= ? + -0 - 200
green.offset= ? + -0 - 200
blue.offset= ? + -0 - 200
red.gain= ? + -0 - 200
green.gain= ? + -0 - 200
blue.gain= ? + -0 - 200
vert.pos= ? + -0 - 200
hori.pos= ? + -0 - 200
phase= ? + -0 - 200
tracking= ? + -0 - 200
sync.level= ? + -0 - 200
System menu
osd.menupos= ?0 = Left Upper 
1 = Right Upper
2 =...