Home > Digital Projection > Projector > Digital Projection Projector HIGHlite Cine 330 3D Series User Manual

Digital Projection Projector HIGHlite Cine 330 3D Series User Manual

Here you can view all the pages of manual Digital Projection Projector HIGHlite Cine 330 3D Series User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 21

CONNECTION GUIDE4 
Rev E August 2014 
HIGHlite Cine 330 3D Series
 High Brightness Digital Video Projector  

Page 22

Connection Guide
IN THIS GUIDE
IN THIS GUIDE
Signal Inputs ........................................................................\
..........................15
HDMI 1, HDMI 2 ............................................................................................15
RGB ..............................................................................................................15
Component 1 ...............................................................................................15
Component...

Page 23

page 15
Connection Guide
SIGNAL INPUTS
Signal Inputs
HDMI 1, HDMI 2
Two identical single HDMI 1.4 inputs which support HDCP 1.1 and DVI 1.0.
Used together, the two sockets become a dual HDMI input which supports 
Dual Pipe 3D.
RGB
In the Advanced Image menu, set Colorspace to Auto, or if necessary to RGB PC.
Component 1
RGsB
In the Advanced Image menu, set Colorspace to Auto, or if necessary to RGB 
Video.
YPbPr
In the Advanced Image menu, set Colorspace to Auto, or if necessary to YPbPr or 
YCbCr....

Page 24

page 16
Connection Guide
3D CONNECTIONS
3D connections
3D sources up to 60Hz requiring frame doubling and left/
right interleaving
1. Connect the HDMI 1 or HDMI 2 input.
2. Set  3D Format in the 3D Control menu to Auto, except when the projector has 
problems selecting between Side by Side (Half), Top and Bottom and Frame 
Sequential.
Dual Pipe 3D
1. Connect to both HDMI Inputs.
2. Set  3D Format in the 3D Control menu to Dual-Pipe.
HDMI 1 is the left image, and HDMI 2 is the right image.
3D Sync in
•...

Page 25

page 17
Connection Guide
CONTROL CONNECTIONS
Control Connections
USB
The USB port is used to download firmware updates only.
Wired remote
If infrared signals from the remote control cannot reach the projector d\
ue to excessive 
distance or obstructions such as walls or cabinet doors, you can connect\
 an external 
IR repeater to the remote control input, and position its IR sensor with\
in range of the 
operator.
RS-232
All of the projector’s features can be controlled via a serial connection, using the...

Page 26

page 18
Connection Guide
WIRING DETAILS
Wiring Details
Signal inputs
HDMI 1 and 2
19 way type A connector
1 TMDS Data 2+
2 TMDS Data 2 Shield
3 TMDS Data 2-
4 TMDS Data 1+
5 TMDS Data 1 Shield
6 TMDS Data 1-
7 TMDS Data 0+
8 TMDS Data 0 Shield
9 TMDS Data 0-
10 TMDS Clock+
11 TMDS Clock Shield
12 TMDS Clock-
13 CEC
14 not connected
15 SCL (DDC Clock)
16 SCA (DDC Data)
17 DDC/CEC Ground
18 +5 V Power
19 Hot Plug Detect
HDMI: pin view of panel connector
Notes
 For full details of all input settings, 
see...

Page 27

page 19
Connection Guide
WIRING DETAILS
RGB
15 way D-type connector
1 R
2 G
3 B
4 unused
5 Digital Ground (H Sync)
6 R Ground
7 B Ground
8 G Ground
9 +5V
10 Digital Ground (V Sync/DDC)
1 unused
12 SDA
13 H Sync
14 V Sync
15 SCL
Component 1
3 x 75 ohm RCA Phono
 RGsB     YPbPr  YCbCr
Y/G G + Sync   Y    Y
Pb/B B    Pb    Cb
Pr/R R  Pr  Cr
Component 2
3 x 75 ohm BNC
 RGsB     YPbPr  YCbCr
Y/G G + Sync   Y    Y
Pb/B B    Pb    Cb
Pr/R R  Pr  Cr
Notes
 For full details of all input settings, 
see the...

Page 28

page 20
Connection Guide
WIRING DETAILS
Control connections
USB
USB type A socket
Pin 1    VCC (+5 V)  
Pin 2    Data−  
Pin 3    Data+  
Pin 4    Ground
Wired remote
3.5mm mini jack
Tip Signal
Ring Not connected
Sleeve Ground
RS-232
9 way D-type connector
1 unused
2 Received Data (RX)
3 Transmitted Data (TX)
4 unused
5 Signal Ground
6 unused
7 unused
8 unused
9 unused
Notes
 For full details of all network 
settings, see the Operating Guide .
 Note that plugging in an IR repeater 
cable will disable the...

Page 29

page 21
Connection Guide
WIRING DETAILS
RJ45
RJ45 socket
12V Trigger I and II
3.5mm mini jack
Tip Power
Ring Signal
Sleeve Ground
Sync IN and Sync OUT
75 ohm BNC
LAN connection
Notes
 Only one remote connection (RS-
232 or RJ45) should be used at any 
one time.
 See the Remote Communications 
Guide  for details.
Sleeve
RingTip
pin view of female connector
pin view of female connector
   
    
Digital Projection HIGHlite Cine 330 3D Series 
Rev E August 2014  

Page 30

Connection Guide
   
    
Digital Projection HIGHlite Cine 330 3D Series 
This page is intentionally left blank.  
Start reading Digital Projection Projector HIGHlite Cine 330 3D Series User Manual

Related Manuals for Digital Projection Projector HIGHlite Cine 330 3D Series User Manual

All Digital Projection manuals