Home
>
Digital Projection
>
Projector
>
Digital Projection Projector HIGHlite Cine 330 3D Series User Manual
Digital Projection Projector HIGHlite Cine 330 3D Series User Manual
Have a look at the manual Digital Projection Projector HIGHlite Cine 330 3D Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 17
page 9
Installation and Quick-Start Guide
POSITIONING THE SCREEN AND PROJECTOR
Positioning The Screen And Projector
1. Install the screen, ensuring that it is in the best position for viewing\
by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet
so that the projector is level, and perpendicular to the screen.
Alternatively, four M4 bolts (max length 12 mm [0.5 in]) can be used to attach the \...](http://img.usermanuals.tech/thumb/5761/99241/w64_projector_manual_7331_d-16.png "Page 17
page 9
Installation and Quick-Start Guide
POSITIONING THE SCREEN AND PROJECTOR
Positioning The Screen And Projector
1. Install the screen, ensuring that it is in the best position for viewing\
by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet
so that the projector is level, and perpendicular to the screen.
Alternatively, four M4 bolts (max length 12 mm [0.5 in]) can be used to attach the \...")
![Page 18
page 10
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Operating The Projector
Switching the projector on
• Connect the power cable between the mains supply and the projector.
• Wait until the self-test has completed and the standby indicator on the p\
rojector control panel shows amber. The lamp will be off and the
projector will be in STANDBY mode.
• Press on the remote control or the control panel to switch the projector ON. The power indicator on the control panel flashes
blue for a...](http://img.usermanuals.tech/thumb/5761/99241/w64_projector_manual_7331_d-17.png "Page 18
page 10
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Operating The Projector
Switching the projector on
• Connect the power cable between the mains supply and the projector.
• Wait until the self-test has completed and the standby indicator on the p\
rojector control panel shows amber. The lamp will be off and the
projector will be in STANDBY mode.
• Press on the remote control or the control panel to switch the projector ON. The power indicator on the control panel flashes
blue for a...")
![Page 22
Connection Guide
IN THIS GUIDE
IN THIS GUIDE
Signal Inputs ........................................................................\
..........................15
HDMI 1, HDMI 2 ............................................................................................15
RGB ..............................................................................................................15
Component 1 ...............................................................................................15
Component...](http://img.usermanuals.tech/thumb/5761/99241/w64_projector_manual_7331_d-21.png "Page 22
Connection Guide
IN THIS GUIDE
IN THIS GUIDE
Signal Inputs ........................................................................\
..........................15
HDMI 1, HDMI 2 ............................................................................................15
RGB ..............................................................................................................15
Component 1 ...............................................................................................15
Component...")
![Page 25
page 17
Connection Guide
CONTROL CONNECTIONS
Control Connections
USB
The USB port is used to download firmware updates only.
Wired remote
If infrared signals from the remote control cannot reach the projector d\
ue to excessive
distance or obstructions such as walls or cabinet doors, you can connect\
an external
IR repeater to the remote control input, and position its IR sensor with\
in range of the
operator.
RS-232
All of the projector’s features can be controlled via a serial connection, using the...](http://img.usermanuals.tech/thumb/5761/99241/w64_projector_manual_7331_d-24.png "Page 25
page 17
Connection Guide
CONTROL CONNECTIONS
Control Connections
USB
The USB port is used to download firmware updates only.
Wired remote
If infrared signals from the remote control cannot reach the projector d\
ue to excessive
distance or obstructions such as walls or cabinet doors, you can connect\
an external
IR repeater to the remote control input, and position its IR sensor with\
in range of the
operator.
RS-232
All of the projector’s features can be controlled via a serial connection, using the...")
CONNECTION GUIDE4 Rev E August 2014 HIGHlite Cine 330 3D Series High Brightness Digital Video Projector
Connection Guide
IN THIS GUIDE
IN THIS GUIDE
Signal Inputs ........................................................................\
..........................15
HDMI 1, HDMI 2 ............................................................................................15
RGB ..............................................................................................................15
Component 1 ...............................................................................................15
Component 2 ...............................................................................................15
3D connections ........................................................................\
....................16
3D sources up to 60Hz requiring frame doubling and left/right
interleaving ..................................................................................................16
Dual Pipe 3D ................................................................................................16
3D Sync in ....................................................................................................16
3D Sync out..................................................................................................16
Control Connections ........................................................................\
........17
USB ...............................................................................................................17
Wired remote ...............................................................................................17
RS-232 ..........................................................................................................17
RJ45 ..............................................................................................................17
12V Trigger I and II ......................................................................................17
Wiring Details........................................................................\
........................18
Signal inputs ................................................................................................18
HDMI 1 and 2 ......................................................................................18
RGB ....................................................................................................19
Component 1.......................................................................................19
Component 2.......................................................................................19
Control connections ...................................................................................20
Wired remote.......................................................................................20
RS-232 ................................................................................................20
RJ45 ....................................................................................................21
12V Trigger I and II..............................................................................21
Sync IN and Sync OUT .......................................................................21
Digital Projection HIGHlite Cine 330 3D Series
Rev E August 2014
page 15
Connection Guide
SIGNAL INPUTS
Signal Inputs
HDMI 1, HDMI 2
Two identical single HDMI 1.4 inputs which support HDCP 1.1 and DVI 1.0.
Used together, the two sockets become a dual HDMI input which supports
Dual Pipe 3D.
RGB
In the Advanced Image menu, set Colorspace to Auto, or if necessary to RGB PC.
Component 1
RGsB
In the Advanced Image menu, set Colorspace to Auto, or if necessary to RGB
Video.
YPbPr
In the Advanced Image menu, set Colorspace to Auto, or if necessary to YPbPr or
YCbCr.
Component 2
YPbPr
In the Advanced Image menu, set Colorspace to Auto, or if necessary to YPbPr or
YCbCr.Component 1Component 2RGBHDMI 2
HDMI 1
Notes
For a complete listing of pin
configurations for all signal and
control connectors, see Wiring
Details later in this Guide.
Digital Projection HIGHlite Cine 330 3D Series
Rev E August 2014
page 16
Connection Guide
3D CONNECTIONS
3D connections
3D sources up to 60Hz requiring frame doubling and left/
right interleaving
1. Connect the HDMI 1 or HDMI 2 input.
2. Set 3D Format in the 3D Control menu to Auto, except when the projector has
problems selecting between Side by Side (Half), Top and Bottom and Frame
Sequential.
Dual Pipe 3D
1. Connect to both HDMI Inputs.
2. Set 3D Format in the 3D Control menu to Dual-Pipe.
HDMI 1 is the left image, and HDMI 2 is the right image.
3D Sync in
• Sync input signal.
3D Sync out
• Sync output signal. This may be affected by the Sync Delay setting in the
3D Control menu
Notes
See the Operating Guide and
the Reference Guide for further
information on 3D settings.
Dual Pipe
HDMI 2
HDMI 1Sync OUT
Sync IN
Digital Projection HIGHlite Cine 330 3D Series
Rev E August 2014
page 17
Connection Guide
CONTROL CONNECTIONS
Control Connections
USB
The USB port is used to download firmware updates only.
Wired remote
If infrared signals from the remote control cannot reach the projector d\
ue to excessive
distance or obstructions such as walls or cabinet doors, you can connect\
an external
IR repeater to the remote control input, and position its IR sensor with\
in range of the
operator.
RS-232
All of the projector’s features can be controlled via a serial connection, using the text
strings described in the Remote Communications Guide.
Use a straight-through cable to connect directly to a computer.
RJ45
All of the projector’s features can be controlled via a LAN connection, using the text
strings described in the Remote Communications Guide.
Use a crossed LAN cable to connect directly to a computer, or an uncrossed cable to
connect to a network hub.
12V Trigger I and II
These outputs can be used for any of the following purposes, as set in the Control
menu:
• Screen: can be connected to an electrically operated screen, automatical\
ly
deploying the screen when the projector starts up, and retracting the sc\
reen when
the projector shuts down.
• Aspect ratio: can be used to control screen shuttering for different aspect ratios.
• RS-232: can be used to control the screen or screen shuttering on receip\
t of an
RS-232 command.
Notes
For a complete listing of pin
configurations for all signal and
control connectors, see Wiring
Details later in this Guide.
Only one remote connection (RS232
or LAN) should be used at any one
time.
Note that plugging in an IR repeater
cable will disable the infra-red
sensors.
Wired remoteRJ45USB12V Trigger I and II
RS-232
Digital Projection HIGHlite Cine 330 3D Series
Rev E August 2014
page 18
Connection Guide
WIRING DETAILS
Wiring Details
Signal inputs
HDMI 1 and 2
19 way type A connector
1 TMDS Data 2+
2 TMDS Data 2 Shield
3 TMDS Data 2-
4 TMDS Data 1+
5 TMDS Data 1 Shield
6 TMDS Data 1-
7 TMDS Data 0+
8 TMDS Data 0 Shield
9 TMDS Data 0-
10 TMDS Clock+
11 TMDS Clock Shield
12 TMDS Clock-
13 CEC
14 not connected
15 SCL (DDC Clock)
16 SCA (DDC Data)
17 DDC/CEC Ground
18 +5 V Power
19 Hot Plug Detect
HDMI: pin view of panel connector
Notes
For full details of all input settings,
see the Operating Guide .
Digital Projection HIGHlite Cine 330 3D Series
Rev E August 2014
page 19
Connection Guide
WIRING DETAILS
RGB
15 way D-type connector
1 R
2 G
3 B
4 unused
5 Digital Ground (H Sync)
6 R Ground
7 B Ground
8 G Ground
9 +5V
10 Digital Ground (V Sync/DDC)
1 unused
12 SDA
13 H Sync
14 V Sync
15 SCL
Component 1
3 x 75 ohm RCA Phono
RGsB YPbPr YCbCr
Y/G G + Sync Y Y
Pb/B B Pb Cb
Pr/R R Pr Cr
Component 2
3 x 75 ohm BNC
RGsB YPbPr YCbCr
Y/G G + Sync Y Y
Pb/B B Pb Cb
Pr/R R Pr Cr
Notes
For full details of all input settings,
see the Operating Guide .
VGA: pin view of female connector
Component 1 connector
Component 2 connector
Digital Projection HIGHlite Cine 330 3D Series
Rev E August 2014
page 20
Connection Guide
WIRING DETAILS
Control connections
USB
USB type A socket
Pin 1 VCC (+5 V)
Pin 2 Data−
Pin 3 Data+
Pin 4 Ground
Wired remote
3.5mm mini jack
Tip Signal
Ring Not connected
Sleeve Ground
RS-232
9 way D-type connector
1 unused
2 Received Data (RX)
3 Transmitted Data (TX)
4 unused
5 Signal Ground
6 unused
7 unused
8 unused
9 unused
Notes
For full details of all network
settings, see the Operating Guide .
Note that plugging in an IR repeater
cable will disable the infra-red
sensors.
See the Remote Communications
Guide for details.
USB port:
pin view of female connector
Sleeve
RingTip
RS232:
pin view of female connector
Digital Projection HIGHlite Cine 330 3D Series
Rev E August 2014
page 21
Connection Guide
WIRING DETAILS
RJ45
RJ45 socket
12V Trigger I and II
3.5mm mini jack
Tip Power
Ring Signal
Sleeve Ground
Sync IN and Sync OUT
75 ohm BNC
LAN connection
Notes
Only one remote connection (RS-
232 or RJ45) should be used at any
one time.
See the Remote Communications
Guide for details.
Sleeve
RingTip
pin view of female connector
pin view of female connector
Digital Projection HIGHlite Cine 330 3D Series
Rev E August 2014
Connection Guide
Digital Projection HIGHlite Cine 330 3D Series
This page is intentionally left blank.