Home > Digital Projection > Projector > Digital Projection Projector HIGHlite Cine 330 3D Series User Manual

Digital Projection Projector HIGHlite Cine 330 3D Series User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Digital Projection Projector HIGHlite Cine 330 3D Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							page 103
    Reference Guide
    APPENDIX C: GLOSSARY OF TERMS
    Throw distance
    The distance between the screen and the projector.
    Throw ratio
    The ratio of the throw distance to the screen width.
    TRF (Throw ratio factor)
    A special number used in calculating throw distances and throw ratios when the image does not fill the width of the DMD™.
    The throw ratio for a particular lens is fixed but assumes that the image fills the width of the DMD™. For images that do fill the full width of 
    the DMD™, TRF = 1. For images that do not fill the DMD™, TRF is effectively increased.
    UXGA
    A display resolution of 1600x1200 pixels with a 4:3 screen aspect ratio. (Stands for Ultra Extended Graphics Array.)
    Vertical Scan Rate
    The rate at which the frames of the incoming signal are refreshed. The rate is set by the vertical synchronization from the source and 
    measured in Hertz.
    Vignetting
    Optical cropping of the image caused by the components in the projection\
     lens.  This can happen if too much offset is applied when 
    positioning the image using the lens mount.
    Vista
    An aspect ratio of 1.66:1.
    WUXGA
    A display resolution of 1920 x 1200 pixels with a 16:10 screen aspect ratio. (Stands for Widescreen Ultra Extended Graphics Array.)
    Notes
       
        
    Digital Projection HIGHlite Cine 330 3D Series 
    Rev E August 2014  
    						
    							page 104
    Reference Guide
    APPENDIX C: GLOSSARY OF TERMS
    Y
    This is the luminance input (brightness) from an S-Video or Component Video signal.
    YUV
    See Pr, Pb.
    ZScreen
    A special kind of light modulator which polarizes the projected image for\
     3D viewing. It normally requires that images are projected onto a 
    silver screen. The ZScreen is placed between the projector lens and screen. It changes \
    the polarization of the projected light and switches 
    between left- and right-handed circularly polarized light at the field rate.
    Notes
       
        
    Digital Projection HIGHlite Cine 330 3D Series 
    Rev E August 2014  
    						
    							
        
        
    113-827E HIGHlite Cine 330 3D Series User Manual
    Contact Information:
    Digital Projection Limited
    Greenside W Manchester M24 1XX, UK
    Registered in England No. 2207264 00350048004A004C00560057004800550048004700030032004900BF00460048001D000300440056000300440045005200590048
    T \(+44\) 161 947 3300 Fax \(+44\) 161 684 7674
    [email protected] [email protected]
    www
    Digital Projection Inc.
    55 Chastain Road, Suite 1 Kennesaw
    T \(+1\) 770 420 1350 Fax \(+1\) 770 420 1360
    [email protected] www
    Digital Projection China
    045D0D2D0003094704DC1432000300031D4D4C63096A000338BD399F1275094747FC1010A27000304460F950D2D4C75045D15F3A14D7200611D4\(100029\)
    Rm A2006 ShaoY Shi  Chaoyang District Beijing 100029, PR CHINA
    T \(+86\) 10 84888566 Fax \(+86\) 10 84888566-805
    [email protected] www
    Digital 
    16 New Industrial Road #02-10  Singapore 536204
    T \(+65\) 6284-1 Fax \(+65\) 6284-1238  
    						
    All Digital Projection manuals Comments (0)

    Related Manuals for Digital Projection Projector HIGHlite Cine 330 3D Series User Manual