Home
>
Digital Projection
>
Projector
>
Digital Projection Projector HIGHlite Cine 330 3D Series User Manual
Digital Projection Projector HIGHlite Cine 330 3D Series User Manual
Here you can view all the pages of manual Digital Projection Projector HIGHlite Cine 330 3D Series User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
page 53 Remote Communications Guide THE OPERATION COMMANDS osd.timer= ?0 = Always On 1 = Display OSD for 10 sec. 2 = Display OSD for 30 sec. 3 = Display OSD for 60 sec. osd.msgbox= ?0 = Off 1 = On blank.screen= ?0 = Logo 1 = Black 2 = Blue 3 = White auto.poweroff= ?0 = Off 1 = On auto.poweron= ?0 = Off 1 = On proj.mode= ?0 = Front Tabletop 1 = Front Ceiling 2 = Rear Tabletop 3 = Rear Ceiling logo.disp= ?0 = disable 1 = enable altitude= ?0 = Auto 1 = High lamp.pow= ?0 = Standard 1 = Economy Control...
Page 62
page 54 Remote Communications Guide THE OPERATION COMMANDS trig2= ?0 = Screen 1 = 16:9 2 = TheaterScope 3 = 4:3 4 = 4:3 Narrow 5 = RS232 mode 6 = RS232 On 7 = RS232 Off auto.source= ?0 = Off 1 = On ir.enable= ?0 = Disable 1 = Enable net.en= ?0 = Disable 1 = Enable horiz.offset+ -(none) vert.offset+ -(none) focus+ -(none) zoomin+ -(none) Ser vice menu model.name? ser.number? soft.version? act.source?0 = HDMI 1 1 = HDMI 2 2 = RGB 3 = Component 1 4 = Component 2 signal? pixel.clock? h.refresh?...
Page 63
page 55 Remote Communications Guide THE OPERATION COMMANDS factory.reset(none)(none) pattern= ?0 = Off 1 = White 2 = Black 3 = Red 4 = Green 5 = Blue 6 = Cyan 7 = Magenta 8 = Yellow 9 = Chequer Board 10 = Alignment Grid 11 = Vertical Burst 12 = Horizontal Burst 13 = Color Bars Miscellaneous commands blue.only=0 = Off 1 = On powon(none)(none) powoff(none)(none) status.check?0 = standby 1 = warm up 2 = imaging 3 = cooling 4 = error net.ipaddr? Notes powon and powoff stand for Power On and Power Off...
Page 64
page 56 Remote Communications Guide IP CONFIGURATION UTILITY IP Configuration Utility The IP Configuration utility can be used to change the IP Address, Subnet and Gateway. DHCP can also be switched on or off. To access the IP Configuration utility, • Type the URL http:// into the address bar of your browser, then press ENTER. The embedded web page shown on the right should appear. Notes The default LAN IP address is 192.168.0.100 You can use the net.ipaddr command to obtain the current IP...
Page 65
REFERENCE GUIDE4 Rev E August 2014 HIGHlite Cine 330 3D Series High Brightness Digital Video Projector
Page 66
Reference Guide IN THIS GUIDE IN THIS GUIDE The DMD™ ........................................................................\ ...............................59 Aspect Ratios Explained .......................................................................61 Aspect ratio examples for DMD™ resolution 1080p ................................62 Aspect ratio example: TheaterScope ........................................................65 Screen Requirements...
Page 67
page 59 Reference Guide THE DMD™ The DMD™ A DMD™ (Digital Micromirror Device™) is a true digital light modu\ lator which utilises an array of up to 2.3 million moving aluminium mirr\ ors, with each one representing a pixel in the final projected image. The outermost micromirrors in the array remain inactive and are not used in constructing the image. 1Casing 2Light shield 3Inactive mirrors 4Array Each mirror element is suspended over address electrodes by a torsion hi\ nge between two posts. 1Support...
Page 68
page 60 Reference Guide THE DMD™ The DMD™ (continued) Depending on the voltage polarity applied, each mirror will either tilt \ to the left to produce a bright pixel or to the right for a dark pixel. \ When light is applied to the complete DMD™, only the light redirected from\ a mirror tilting to the left is projected. 1Projection lens 2Incoming light from the lamp 3Mirror element tilted to the right 4Mirror element tilted to the left 5Reflected light, left tilt 6Light dump 7Reflected light, right...
Page 69
page 61 Reference Guide ASPECT RATIOS EXPLAINED Aspect Ratios Explained The appearance of a projected image on the screen depends on a combinati\ on of the following: • The DMD™ resolution: 1080p with a 1920 x 1080 resolution, corresponding to an aspect ratio of 16:9\ • The aspect ratio of the input signal: 4:3, 16:9 or 16:10 • The value of the Aspect Ratio setting of the projector: • 16:9 forces a 16:9 ratio on the image. • TheaterScope is a special setting used in combination with an anamorphic lens,...
Page 70
page 62 Reference Guide ASPECT RATIOS EXPLAINED Aspect ratio examples for DMD™ resolution 1080p Source: 4:3 1Unused screen areas Notes Aspect Ratio: 4:3 11 Aspect Ratio: 16:9 Digital Projection HIGHlite Cine 330 3D Series Rev E August 2014