Digital Projection Projector HIGHlite Cine 330 3D Series User Manual

page 3
Installation and Quick-Start Guide
WHAT’S IN THE BOX?
What’s In The Box?Notes
 Make sure your box contains 
everything listed. If any pieces are 
missing, contact your dealer.
 You should save the original box 
and packing materials, in case you 
ever need to ship your projector.
 The projector is shipped without a 
lens.
 A power cable suitable for the 
destination territory will also be 
supplied with the projector.
Remote control (115-758)2x AA batteries
User Manual on disc (115-759)
Projector...

page 4
Installation and Quick-Start Guide
GETTING TO KNOW THE PROJECTOR
Getting To Know The Projector
Front and rear views
Air 
outlet
Lens
Front 
infra-red  window
Control  panel
Rear 
infra-red  window
Connection  panel
Mains input
Air 
inlet
Adjustable  feet
Notes
   
    
Digital Projection HIGHlite Cine 330 3D Series 
Rev E August 2014  

page 5
Installation and Quick-Start Guide
GETTING TO KNOW THE PROJECTOR
Remote control
ButtonFunction
POWER ON / OFFSwitch the projector on and off.
SOURCE 1-5Change the active input source.
PIC MUTESwitch to low power mode, low fan speed and 
display a black image.
ARROW buttonsNavigate up, down, left and right, increment and 
decrement values, cycle through items
ENTEROpen a sub-menu, execute a command, confirm a 
choice.
MENUShow and hide the OSD.
ASPECT RATIOCycle through available aspect ratios....

page 6
Installation and Quick-Start Guide
GETTING TO KNOW THE PROJECTOR
Control panel and indicators
POWER indicator (blue) and STANDBY indicator (amber)
The blue POWER indicator will light when the projector is ON, and will flash when the projector is cooling down or warming up. It will be off when 
the projector is in STANDBY mode. The amber STANDBY indicator will light when the projector is in STANDBY mode.
ConditionPower indicator (blue light)Standby indicator (amber light)
StandbyOffOn
Cooling /...

page 7
Installation and Quick-Start Guide
FITTING THE LENS
Fitting The Lens
1. Remove the two screws securing the front cover to the body 
of the projector.
2. Push the front cover down, then pull it away from the 
projector.
3. Push down the lens holder tab.
4. Hold down the tab, and insert the lens into the lens aperture, 
making sure that the plug on the zoom drive mechanism 
lines up with the socket on the right of the lens aperture.
5. Still holding down the tab, push the lens in firmly as far as it...

page 8
Installation and Quick-Start Guide
CHANGING THE LAMP
Changing The Lamp
1. Remove the lamp compartment 
cover. 
Unscrew the two captive screws 
securing the lamp module and pull 
firmly to remove the lamp module.
2. Insert a new lamp module. Fasten 
the screws and replace the lamp 
compartment cover.
Lamp 
compartment cover
Notes
  Always allow the lamp to cool for 
5 minutes before:
  - disconnecting the power 
- moving the projector  
- changing the lamp
   
    
Digital Projection HIGHlite Cine...

page 9
Installation and Quick-Start Guide
POSITIONING THE SCREEN AND PROJECTOR
Positioning The Screen And Projector
1. Install the screen, ensuring that it is in the best position for viewing\
 by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet 
so that the projector is level, and perpendicular to the screen.
Alternatively, four M4 bolts (max length 12 mm [0.5 in]) can be used to attach the \...

page 10
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Operating The Projector
Switching the projector on
• Connect the power cable between the mains supply and the projector.
• Wait until the self-test has completed and the standby indicator on the p\
rojector control panel shows amber. The lamp will be off and the 
projector will be in STANDBY mode.
• Press  on the remote control or the control panel to switch the projector ON. The power indicator on the control panel flashes 
blue for a...

page 11
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Adjusting the lens
To access lens controls, do either of the following:
• Press the LENS button on the remote.
• Access the Control menu and navigate to Lens Control. 
Use the arrow buttons to adjust Zoom, Focus and Shift.
Adjusting the image
Projector mode (orientation) and OSD settings
These can be set from the System menu.
Aspect ratio
To set up an aspect ratio for your image, do either of the following:
• Press the ASPECT RATIO button...

Installation and Quick-Start Guide
   
    
Digital Projection HIGHlite Cine 330 3D Series 
This page is intentionally left blank.