Dell M 5200 Manual

Load paper51
3Slide the width guide to the far right.
4Load paper or transparencies with the left edge of the stack against the stack height 
limiter and with the recommended print side face up.
1Stack height limiter
1 

52Load paper
www.dell.com/supplies | support.dell.com
5Gently slide the print media into the multipurpose feeder as far as it will go. Forcing 
the print media may cause it to buckle.
6Slide the width guide to the left until it lightly touches the stack of print media. Do 
not bend the print media.
7Select the source, size, and type from your software application and select print media 
size and type from the printer operator panel.
– Make sure the Paper Size and Paper Type for the multipurpose feeder...

Load paper53
Loading envelopes
You can load envelopes in the multipurpose feeder or the optional envelope feeder. If you 
purchased the optional envelope feeder, refer to the User’s Guide for loading instructions.
In the multipurpose feeder
Load envelopes flap side down with the stamp area and flap on the left. The end of the 
envelope with the stamp area enters the multipurpose feeder first.
 NOTICE: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick 
adhesives. These...

54Load paper
www.dell.com/supplies | support.dell.com
Closing the multipurpose feeder
1Remove print media from the multipurpose feeder.
2Push the metal bar straight back to collapse the multipurpose feeder to its 
short-length position.
3Close the multipurpose feeder door. 

5
SECTION 5
Use your printer
Changing the language on the operator panel
Using the operator panel to change printer settings
Printing a job
Canceling a job from the printer operator panel
Utilizing additional software tools
Replacing the toner cartridge 

56Use your printer
www.dell.com/supplies | support.dell.com
Changing the language on the operator panel
To display a different language on the operator panel:
1Press and release Menu until you see Setup Menu, and then press Select.
2Press and release Menu until Display Language appears, and then press Select.
3Scroll through the languages to choose the one you want, and then press Select.
Using the operator panel to change printer 
settings
The diagram on page 59 shows the menu items in each menu. For...

Use your printer57
Each menu item has a list of values for the menu item. A value can be:
 A phrase or word to describe a setting
 A numerical value that can be changed
 An On or Off setting
5Press Menu to scroll to the value you need.
6Press Select to select the value on the second line of the operator panel. An asterisk 
appears beside the value to indicate that it is now the user default setting. The new 
setting appears for one second, clears, displays the word Saved, and then displays the...

58Use your printer
www.dell.com/supplies | support.dell.com
When you select Restore:
 No other button actions are available on the operator panel while Restoring 
Factory Defaults appears.
 All downloaded resources (fonts, macros, and symbol sets) in printer memory 
(RAM) are deleted. (Resources residing in flash memory or on the optional hard 
disk are unaffected.)
 All menu settings are returned to the factory default values, except:
– The operator panel Display Language setting in the Setup Menu.
–...

Use your printer59
Quality Menu
Print Resolution
Toner Darkness
PictureGrade Setup Menu
Printer Language
Po w e r  S a v e r
Quick Start
Resource Save
Print Timeout
Wa i t  T i m e o u t
Auto Continue
Jam Recovery
Pa g e  P r o t e c t
Print Area
Display Language
Alarm Control
To n e r  A l a r m PCL Emul Menu
Font Source
Fo n t  N a m e
Point Size
Pitch
Symbol Set
Orientation
Lines per Page
A4 Width
Tray Renumber
Auto CR after LF
Auto LF after CR PostScript Menu
Print PS Error
Paper Menu
Paper Source...

60Use your printer
www.dell.com/supplies | support.dell.com
Printing a job
To print a job from a typical Microsoft® Windows® application:
1Open the file you want to print.
2From the File menu, select Pr int.
3Verify that the correct printer is selected in the dialog box. Modify the printer settings 
as appropriate (such as the pages you want to print or the number of copies).
4Click Properties or Setup to change printer settings not available from the first screen, 
and then click OK. 
5Click OK or Print...