DELL 2335dn User Manual

1.
Place the document  face down  on the document glass and align it with the registration guide on the top
left corner of the glass.
2.
For detailed guidelines for preparing an original document, see  Preparing a Document
.
Close the document cover.
3.
NOTE: If you are copying a page from a book or magazine,  lift the cover until its hinges are
caught by the stopper and then close the cover.  If the book or magazine is thicker than 30 mm,
start copying with the cover open.
NOTE: Leaving the cover open...

Making Copies
NOTE: A computer connection is not required for copying.
NOTE: Contaminates on the document glass may cause black spots on the printout. For best results,
clean the document glass before use. See  Cleaning the scanner
.
Load the document(s) face up with the top edge in first into the DADF.
1.
OR
Place a single document face down on the document glass.
For details about loading a document, see  Loading an Original Document
.
Customize the copy settings including the number of copies, copy...

Number of Copies
You can select the number of copies from 1 to 199. Press  Scroll  (
 or 
 ) to highlight  Copy and then press  Select (
 ).
1.
Press  Scroll  (
 or 
 ) to highlight  # of copies and then press  Select (
 ).
2.
Enter the value you want using the number keypad.
3.
Press  Start (
 ).
4.
Enlarge/Reduce Copy
You can reduce or enlarge the size of a copied image, from 25 percent to 400 percent when you copy original
documents from the document glass or the DADF. Note that the zoom rate...

1.Press  Scroll  (
 or 
 ) to highlight  Contrast and then press  Select (
 ).
2.
Press  Scroll  (
 or 
 ) to adjust the contrast and then press  Select (
 ).
3.
Original Size
You can set the size of a copied image, when you copy original documents from the documents glass or the
DADF.
Press  Scroll  (
 or 
 ) to highlight  Copy and then press  Select (
 ).
1.
Press  Scroll  (
 or 
 ) to highlight  Original Size  and then press  Select (
 ).
2.
Press  Scroll  (
 or 
 ) to select the original size and...

the printer. See Auto Fit Copying
.
Poster: Prints an image onto 9 sheets of paper (3 by 3). You can paste the printed pages together to
make one poster-size document. See  Poster Copying
.
Clone: Prints multiple image copies from the original document on a single page. The number of
images is automatically determined by the original image and paper size. See  Clone Copying
.
Collation: Prints output in sets to match the sequence of originals. See  Deciding the form of copy
output .
2 up, 4 up : Prints 2...

7.
NOTE: If you press the  Cancel (
 ) button or if no buttons are pressed for about 30 seconds ,
the printer cancels the copy job and returns to Standby mode.
Press Start (
 ) again.
8.
Auto Fit Copying
This special copy mode can be applied when you load a document using only the
document glass.  If a document is detected in the  DADF, the Auto Fit does not work.
NOTE: You cannot adjust the copy size using the  Zoom menu while the Auto Fit
copying is enabled.
To make the Auto Fit copying:Load the...

This special copy mode can be applied when you load a document using only the
document glass.  If a document is detected in the  DADF, the Poster copying feature does
not work.
NOTE: You cannot adjust the copy size using the  Zoom menu button for making a
poster.
To make the Poster copying:Load the documents to be copied on the document glass and close the cover.
1.
Press  Scroll  (
 or 
 ) to highlight  Copy and then press  Select (
 ).
2.
Press  Scroll  (
 or 
 ) to highlight  Layout and then press...

This special copy mode can be applied when you load a document using only the
document glass.  If a document is detected on the  DADF, the Clone copying feature does
not work.
NOTE: You cannot adjust the copy size using the  Zoom menu while making a
clone copy.
To make the Clone copying:Load the document to be copied on the document glass, and close the cover.
1.
Press  Scroll  (
 or 
 ) to highlight  Copy and then press  Select (
 ).
2.
Press  Scroll  (
 or 
 ) to highlight  Layout and then press...

The machine reduces the size of the original images and prints 2 or 4 pages onto one
sheet of paper. This special copy mode can be applied when you load a document using
only the DADF.
NOTE: You cannot adjust the copy size using the  Zoom menu for making a 2 Up or
4 Up copy.
Load the document to be copied in the DADF.
1.
Press  Scroll  (
 or 
 ) to highlight  Copy and then press  Select (
 ).
2.
Press  Scroll  (
 or 
 ) to highlight  Layout and then press  Select (
 ).
3.
Press  Scroll  (
 or 
 ) to...

2->1sided long edge: Scans both sides of the originals and prints each of them on a separate
sheet.
2->1sided short edge: Scans both sides of the originals and prints each one on a separate
sheet, but the information on the back side of the printout is rotate 180°.
2->2sided long edge: Scans both sides of the original and prints on both sides of the paper.
This function produces exactly the same print out from the originals.
If necessary, customize the copy settings including the number of copies, copy...