DELL 2145cn User Manual

							Troubleshooting | 81
The printer does not 
appear on the 
scanners list.• Check if your printer is attached to your 
computer. Ensure that it is connected properly 
via the USB port and is turned on.
• Check if the scanner driver for your printer is 
installed in your system. Open Unified Driver 
configurator, switch to Scanners 
configuration, then press Drivers. Ensure 
that driver with a name corresponding to 
your printers name is listed in the window. 
Check if the port is not busy. Since functional 
components of MFP (printer and scanner) 
share the same I/O interface (port), the 
situation of simultaneous access of different 
“consumer” application to the same port is 
possible. To avoid possible conflicts, only 
one of them at a time is allowed to gain 
control over the device. The other 
“consumer” will encounter “device busy” 
response. This can usually happen while 
starting scan procedure, and appropriate 
message box appears.
•
To identify the source of the problem, you 
should open ports configuration and select the 
port assigned to your scanner. ports symbol /
dev/mfp0 corresponds to LP:0 designation 
displayed in the scanners’ options, /dev/mfp1 
relates to LP:1 and so on. USB ports start at /
dev/mfp4, so scanner on USB:0 relates to /dev/
mfp4 respectively and so forth sequentially. In 
the Selected port pane you can see if the port is 
occupied by some other appli
cation. If this is 
the case, you should wait for completion of 
the current job or should press Release port 
button, if you are sure that the present ports 
owner is not functioning properly.
CONDITIONSUGGESTED SOLUTIONS
The printer does not 
scan.• Check if a document is loaded into the printer.
• Check if your printer is connected to the 
computer. Ensure if it is connected properly if I/
O error is reported while scanning.
• Check if the port is not busy. Since functional 
components of MFP (printer and scanner) 
share the same I/O interface (port), the 
situation of simultaneous access of different 
“consumer” application to the same port is 
possible. To avoid possible conflicts, only one 
of them at a time is allowed to gain control over 
the device. The other “consumer” will 
encounter “device busy” response. This can 
usually happen while starting scan procedure, 
and appropriate message box will be displayed.
To identify the source of the problem, you 
should open ports configuration and select the 
port assigned to your scanner. port’s symbol /
dev/mfp0 corresponds to LP:0 designation 
displayed in the scanners’ options, /dev/mfp1 
relates to LP:1 and so on. USB ports start at /
dev/mfp4, so scanner on USB:0 relates to /dev/
mfp4 respectively and so forth sequentially. In 
the Selected port pane you can see if the port is 
occupied by some other application. If this is 
the case, you should wait for completion of the 
current job or should press Release port 
button, if you are sure that the present port’s 
owner is not functioning properly.
Refer to Linux User’s Guide that came with your computer for further 
information on Linux error messages.
CONDITIONSUGGESTED SOLUTIONS
 
						

							82 | Troubleshooting
Common Macintosh problems
CONDITIONSUGGESTED SOLUTIONS
The printer does not 
print PDF file correctly. 
Some parts of graphics, 
text, or illustrations are 
missing.Incompatibility between the PDF file and 
the Acrobat products:
Printing the PDF file as an image may 
solve this problem. Turn on Print As 
Image from the Acrobat printing options.
It will take longer to print when 
you print a PDF file as an image.
The document has 
printed, but the print job 
has not disappeared 
from the spooler in Mac 
OS 10.3.2.Update your Mac OS to OS 10.3.3. or 
higher.
Some letters are not 
displayed normally 
during the Cover page 
printing.This problem is caused because Mac OS 
cannot create the font during the Cover 
page printing. English alphabet and 
numbers are displayed normally at the 
Cover page.
Refer to Mac OS User’s Guide that came with your computer for 
further information on Mac OS error messages.
 
						

							Ordering supplies and accessories | 83
ordering supplies and accessories
This chapter provides information on purchasing cartridges and accessories available for your printer.
This chapter includes:
• Supplies
• Accessories• How to purchase
SUPPLIES
When the toner runs out, you can order the following type of toner cartridge 
for your printer:
ACCESSORIES
You can purchase and install accessories to enhance your printer’s 
performance and capacity.
HOW TO PURCHASE
To order Dell-authorized supplies or accessories, contact your local Dell 
dealer or the retailer where you purchased your printer, or visit 
www.dell.com or support.dell.com and select your country/region to 
obtain information on calling for technical support.
The optional parts or features may differ by countries. Contact your 
sales representatives whether the part you want is available in your 
country.
TYPEAVERAGE YIELDA
a. Declared yield value in accordance with ISO/IEC 19798.
PART NUMBER
Standard yield 
toner cartridge• Average continuous black 
cartridge yield: 2,500 
standard pages (Black)
• Average continuous 
colored cartridge yield: 
2,000 standard pages 
(Yellow/Magenta/Cyan)T272J (Black)
P586K (Cyan)
K756K (Magenta)
M802K (Yellow)
High yield
toner cartridge• Average continuous black 
cartridge yield: 5,500 
standard pages (Black)
• Average continuous 
colored cartridge yield: 
5,000 standard pages 
(Yellow/Magenta/Cyan)R717J (Black)
P587K (Cyan)
K757K (Magenta)
M803K (Yellow)
Paper transfer 
beltApprox. 50,000
When the transfer belt has 
worn out with abrasion, you 
need to change it. By this 
time you may be notified with 
the transfer belt-related 
message on the display.U265J
When purchasing new print cartridges or other supplies, these must 
be purchased in the same country where the printer was purchased. 
Otherwise, print cartridges or other supplies will be incompatible with 
your printer, as configurations of print cartridges and other supplies 
vary, depending on the specific country.
ACCESSORYDESCRIPTIONPART NUMBER
Memory moduleExtends your 
printer’s memory 
capacity.KR039: 256 MB
Optional tray 2If you are 
experiencing 
frequent paper 
supply problems, 
you can attach an 
additional 500 sheet 
tray. You can print 
documents in 
various sizes and 
types of print 
materials.P955J
Hard DiskAllows you to 
enhance the printer’s 
capability and print in 
various ways.N573K
Your printer may have two memory slots with a factory pre-installed 
memory module in one slot. When you are expanding the memory 
capacity, you can add a memory module to the vacant memory slot, 
according to the table above. It is strongly recommended that you 
expand a memory module in vacant memory slot only, without 
removing a pre-installed memory module. If your printer has 128 MB 
memory capacity and you want to add 256 MB, the memory capacity 
expands up to 384 MB.
 
						

							84| Installing accessories
installing accessories
Your printer is a full-featured model that has been optimized to meet most of your printing needs. Recognizing that each user may 
have different requirements, however, Dell makes several accessories available to enhance your printer’s capabilities.
This chapter includes:
• Precautions to take when installing accessories
• Activating the added accessories in printer properties• Upgrading a memory module
• Using the hard disk
PRECAUTIONS TO TAKE WHEN INSTALLING 
ACCESSORIES
• Disconnect the power cord
Never remove the control board cover while the power is turned on.
To avoid the possibility of an electrical shock, always disconnect the 
power cord when installing or removing ANY internal or external 
accessories.
• Discharge static electricity
The control board and internal accessories (network interface card or 
memory module) are sensitive to static electricity. Before installing or 
removing any internal accessories, discharge static electricity from your 
body by touching something metal, such as the metal back plate on any 
device plugged into a grounded power source. If you walk around before 
finishing the installation, repeat this procedure to discharge any static 
electricity again.
• Activating the added accessories in the PS driver properties.
After installing an accessory such as an optional tray, PS driver users 
must do the additional setting. Go to the PS printer properties and set 
the added accessory activated. 
ACTIVATING THE ADDED ACCESSORIES IN 
PRINTER PROPERTIES
After installing added accessories, you need to select it in the printer 
properties of the printer driver in order to use it.
1.Install the driver (see Installing the software on page 19).
2.Click the Windows Start menu.
• For Windows 2000, select Settings 
→ Printers.
• For Windows XP/2003, select Printers and Faxes.
• For Windows Vista/2008, select Control Panel 
→ Hardware and 
Sound 
→ Printers.
3.Select the your printer’s driver and right-click to open Properties. 
• For PS driver, select PS driver and right-click to open Properties.
4.In printer driver properties, select Device Options. 
• For PS driver, select Device Settings. 
5.In printer driver properties, set the necessary options.
• For PS driver, select the Installable Options section and set the 
necessary options.
6.Click OK. 
UPGRADING A MEMORY MODULE
Your printer has a dual in-line memory module (DIMM). Use this memory 
module slot to install additional memory.
The printer has two memory slots with a factory pre-installed memory 
module in one slot. When you are expanding the memory capacity, you can 
add a memory module to the vacant memory slot. It is strongly 
recommended that you expand a memory module in vacant memory slot 
only without removing a pre-installed memory module (see Ordering 
supplies and accessories on page 83).
Installing a memory module
1.Turn the printer off and unplug all cables from the printer.
2.Release the screws and remove the rear cover. 
3.Release the screws, then lift up the cover slightly and pull the cover to 
the right.
4.Take out a new memory module from the plastic bag.
When installing accessories, battery inside the printer is a service 
component. Do not change it by yourself.
Risk of explosion if battery is replaced by an incorrect type. Dispose 
used batteries according to the instructions.
1Control board cover
If you want to remove an existing memory module, push the two 
latches at the ends of the module outward.
 
						

							Installing accessories | 85
5.Holding the memory module by the edges, align the memory module on 
the slot at about a 30-degree tilt. Ensure that the notches of the module 
and the grooves on the slot fit each other.
6.Press the memory module into the slot with care until you hear a click. 
7.Replace the control board cover and fasten the cover with the screws.
8.Replace the rear cover and fasten the cover with the screw.
9.Reconnect the power cord and printer cable, and turn the printer on.
10.If you use the PS driver, you must activate the added memory in the PS 
driver properties.
See Activating the added accessories in printer properties on page 84.USING THE HARD DISK
Installing the hard disk allows the data from your computer to be sent to the 
print queue of the printer hard disk. This decreases the workload of the 
computer. You can also use various print features, such as storing a job in 
the hard disk, proofing a job, and printing private documents.
Installing the hard disk
For order information, see Accessories on page 83. Review the 
precautions on page 84.
1.Turn the printer off and unplug all cables from the printer.
2.Release the screws and remove the rear cover.
3.Open the control board cover. Release the screws, then lift up the cover 
slightly and pull the cover to the right. 
4.Align the connector on the hard disk with the connector on the control 
board. Push the hard disk in until it is latched into place
.
The notches and grooves illustrated above may not match those 
on an actual memory module and its slot.
Do not press the memory module strongly or the module may be 
damaged. If the module does not seem to fit into the slot properly, 
carefully try the previous procedure again.
To release the memory module, pull the two tabs on the sides of 
the slot outwards, then the module springs out. 
1control board 
cover
 
						

							86 | Installing accessories
5.Fasten the screws supplied with your new hard disk.
6.Replace the control board cover and fasten the cover with the screws.
7.Replace the rear cover and fasten the cover with the screw.
8.Reconnect the power cord and printer cable, and turn the printer on.
9.Print a configuration page from the control panel to check if the hard disk 
is correctly installed. See Printing reports on page 55.
10.If you use the PS driver, you must activate the added hard disk in the PS 
driver properties.
See Activating the added accessories in printer properties on page 84.
Printing with the optional hard disk
After installing the optional hard disk, you can use advanced printing 
features, such as storing or spooling a print job to the hard disk, proofing a 
job, and specifying of printing a private job in the printer properties window.
Once you have stored files in the hard disk, you can easily print or delete 
the stored files using the control panel of your printer.
Storing a job
You can store jobs in the installed hard disk.
1.Open the file you want to store.
2.Select Print from the File menu. The Print window displays.
3.Click Properties. If you see Setup, Print or Options, click the 
button instead.
4.Click the Other Options tab and click Job type.
5.Select the print mode you want from the drop-down list.
• Normal: Prints in normal mode.
• Proof: Prints the first file and after a pause prints the next file.
• Confidentical: Stores the files, securing them with a password.
• Store: Stores the file to the hard disk.
• Spool: Spools the file into the hard disk and prints it from the hard 
disk queue.
• Delay: Prints the file at a specified time.6.Enter the user’s name and file name.
7.Click OK until the Print window is displayed.
8.Click OK or Print to start printing.
Printing a stored job
You can print jobs currently stored in the hard disk.
1.Press Menu () until System Setup appears on the bottom line of 
the display and press OK.
2.Press the left/right arrow until Job Manage appears and press OK.
3.Press the left/right arrow until Store Job appears and press OK.
4.Press the left/right arrow until the user’s name and file name you 
want appear and press OK.
5.If the select file is a confidential print job, enter the specified 4-digit 
password. 
Press the left/right arrow to enter the first digit and press OK. The 
cursor automatically moves to the next digit position. Enter the 2nd, 
3rd, and 4th digit in the same way.
6.When Print appears, press OK.
If you enter the incorrect password, Invalid Password appears. 
Reenter the correct password.
7.Press the left/right arrow until the number of copies you want 
appears and press OK.
8.Press OK. Printing starts.
Deleting a stored job
You can delete jobs currently stored in the hard disk.
1.Press Menu () until System Setup appears on the bottom line of 
the display and press OK.
2.Press the left/right arrow until Job Manage appears and press OK.
3.Press the left/right arrow until Store Job appears and press OK.
4.Press the left/right arrow until the user’s name and file name you 
want appear and press OK.
5.If the select file is a confidential print job, enter the specified 4-digit 
password. 
Press the left/right arrow to enter the first digit and press OK. The 
cursor automatically moves to the next digit position. Enter the 2nd, 
3rd, and 4th digit in the same way.
6.Press the left/right arrow until Delete appears and press OK.
If you enter the incorrect password, Invalid Password appears. 
Reenter the correct password.
7.When Yes appears, press OK.
Controlling the active job queue
All of the print jobs waiting to be printed are listed in the Active Job 
Queue in the order you sent them to the printer. You can delete a job 
from the queue before printing, or promote a job to print sooner.
To delete a file from the queue:
1.Press Menu () until System Setup appears on the bottom line of 
the display and press OK.
2.Press the left/right arrow until Job Manage appears and press OK.
3.Press the left/right arrow until Active Job appears and press OK.
4.Press the left/right arrow until the user’s name and file name you 
want appear and press OK.
5.If the select file is a confidential print job, enter the specified 4-digit 
password. 
Press the left/right arrow to enter the first digit and press OK. The 
cursor automatically moves to the next digit position. Enter the 2nd, 
3rd, and 4th digit in the same way.
 
						

							Installing accessories | 87
6.Press the left/right arrow until Cancel appears and press OK.
If you enter the incorrect password, Invalid Password appears. 
Reenter the correct password.
7.Press the left/right arrow until Yes appears and press OK.
To promote a file from the queue:
You can select a job waiting in the Active Job Queue and change its 
print order so that it can be printed sooner.
1.Press Menu () until System Setup appears on the bottom line of 
the display and press OK.
2.Press the left/right arrow until Job Manage appears and press OK.
3.Press the left/right arrow until Active Job appears and press OK.
4.Press the left/right arrow until the user’s name and file name you 
want appear and press OK.
5.If the select file is a confidential print job, enter the specified 4-digit 
password. 
Press the left/right arrow to enter the first digit and press OK. The 
cursor automatically moves to the next digit position. Enter the 2nd, 
3rd, and 4th digit in the same way.
6.Press the left/right arrow until Promote appears and press OK.
If you enter the incorrect password, Invalid Password appears. 
Reenter the correct password.
To print a file immediately:
You can print a job scheduled to be printed at a specified time 
immediately. In this case, the job currently printing is stopped and the 
selected job will be printed. This function is available when the job is 
scheduled for later printing.
1.Press Menu () until System Setup appears on the bottom line of 
the display and press OK.
2.Press the left/right arrow until Job Manage appears and press OK.
3.Press the left/right arrow until Active Job appears and press OK.
4.Press the left/right arrow until the user’s name and file name you 
want appear and press OK.
5.If the select file is a confidential print job, enter the specified 4-digit 
password. 
Press the left/right arrow to enter the first digit and press OK. The 
cursor automatically moves to the next digit position. Enter the 2nd, 
3rd, and 4th digit in the same way.
6.Press the left/right arrow until Release appears and press OK. 
This option appears only when you select a Delay print job. See 
page 86.
If you enter the incorrect password, Invalid Password appears. 
Reenter the correct password.
Printing using the form files
You can store up to 10 form files in the hard disk and make them printed 
with your document. 
First, you need to create a form file using the printer driver. See the 
Software section.
1.Press Menu () until System Setup appears on the bottom line of 
the display and press OK.
2.Press the left/right arrow until Form Menu appears and press OK.
3.Press the left/right arrow until the form you want appears and press OK.
•Off:Prints in normal mode.
•Single Form:Prints all page using the first form.
•Double Form:Prints the front page using the first form and the 
back page using the second form.
4.Press Back ( ) to return to the upper menu level.5.Press the left/right arrow until Select Form appears and press OK.
6.Press OK when 1st Form appears.
7.Press the left/right arrow until the form file you want appears and 
press OK.
If you select Double Form, continue the next step.
8.Press the left/right arrow until 2nd Form appears and press OK.
9.Press the left/right arrow until the form file for the second form 
appears and press OK.
File policy
You can choose the file policy for generating file name before you proceed 
with the job through hard disk. If the hard disk memory already has the 
same name when you entered a new file name, you can rename or 
overwrite it.
1.Press Menu () until System Setup appears on the bottom line of 
the display and press OK.
2.Press the left/right arrow until Job Manage appears and press OK.
3.Press the left/right arrow until File Policy appears and press OK.
4.Press the left/right arrow until the job setting you want appears and 
press OK.
• Rename:If the hard disk memory already has the same name when 
you enter a new file name, the file will be saved as a different name 
that is automatically programmed.
• Overwrite:You can set the printer to delete previous job information 
on hard disk as you store new job information.
5.Press OK.
Deleting residual image data
ImageOverwrite is a security measure for customers who are concerned 
about unauthorized access and duplication of classified or private 
document. 
1.Press Menu () until System Setup appears on the bottom line of 
the display and press OK.
2.Press the left/right arrow until ImageOverwrite appears and press 
OK.
3.Press the left/right arrow until the job setting you want appears and 
press OK.
•Immediate:All residual image data from the printer will be erased 
immediately after each job has been processed.
• On Demand:This option provides an on-demand facility for a 
system administrator to erase all the real image data remained in 
hard disk after this option enabled. All existing jobs will be deleted 
regardless of their status and all job submissions will be prohibited 
for the duration of the overwrite.
4.Press the left/right arrow to move to On or Off  for Immediate.
Press the left/right arrow to move to Enable or Disable for On 
Demand.
5.Press OK.
If you selected On Demand enabled, the printer confirms if the 
overwrite feature starts now. Press the left/right arrow to select 
Yes or No. If you select Yes, On Demand overwrite starts as soon 
as you select Yes. If you select No, this feature will be enabled.
 
						

							88 | Specifications
specifications
This chapter guides you about this printer’s specifications such as various features.
This chapter include:
• General specifications
• Printer specifications
• Scanner specifications• Copier specifications
• Facsimile specifications
GENERAL SPECIFICATIONS
The symbol * optional feature depending on printers.
ITEMDESCRIPTION
DADF Capacity
Up to 50 sheets 75 g/m2 (20 lb bond) 
DADF 
document sizeWidth: 148 (5.8 inches) to 216 (8.5 inches) mm 
Length: 148 (5.8 inches) to 356 (14 inches) mm 
Paper input 
capacity• Tray: 250 sheets for plain paper, 75 g/m2 (20 lb 
bond)
• Multi-purpose tray: 100 sheets for plain paper, 75 g/
m
2 (20 lb bond)
• Optional tray: 500 sheets for plain paper, 75 g/m2 
(20 lb bond)
For details about paper input capacity, see 25 page.
Paper output 
capacityFace down: 170 sheets 75 g/m2 (20 lb bond)
Power ratingAC 110 - 127 V or AC 220 - 240 V
See the Rating label on the printer for the correct 
voltage, frequency (hertz) and type of current for your 
printer.
Power 
consumption• Average operating mode: Less than 580 W
• Ready mode: Less than 82 W
• Power save mode: Less than 18 W
• Power off mode: 0 W
Noise Levela• Ready mode: Less than 32 dBA
• Printing mode: Less than 53 dBA
• Copying mode: Less than 54 dBA
Default time to 
power save 
mode from 
ready mode20 Minutes
Boot-up timeLess than 49 seconds
The boot-up time will be longer, if data volume is a lot in 
the HDD.
Operating 
environment• Temperature: 15 to 32.5 °C (59 to 90.5 °F)
• Humidity: 20 to 80% RH
Display16 characters x 2 lines
Toner 
cartridge lifebBlack Average continuous black cartridge 
yield: 5,500 standard pages
(Shipped with 2,500 pages Starter 
toner cartridge.)
Color
(Yellow/
Magenta/
Cyan)Average continuous colored cartridge 
yield: 5,000 standard pages
(Shipped with 2,000 pages Starter 
toner cartridge.)
Paper transfer 
beltApprox. 50,000 pages (A4, Letter)
Memory 
(Expandable)*128 MB (max. 384 MB)
External 
dimension
(W x D x H)468 x 498 x 651 mm 
(18.4 x 19.6 x 25.6 inches) without optional tray
Weight
(Including 
consumables)36 kg (79.37 lbs)
Package 
weight• Paper: 5.8 Kg (12.7 lbs)
• Plastic: 1.8 Kg (3.9 lbs)
Duty cycle
(Monthly)Up to 65,000 pages
Fusing 
temperature180 °C (356 °F)
a. Sound Pressure Level, ISO 7779
b. Declared yield value in accordance with ISO/IEC 19798. The number of 
pages may be affected by operating environment, printing interval, 
media type, and media size.
ITEMDESCRIPTION
 
						

							Specifications | 89
PRINTER SPECIFICATIONSSCANNER SPECIFICATIONS
COPIER SPECIFICATIONS
ITEMDESCRIPTION
Printing methodColor laser beam printing
Printing speeda
a. It will be affected by operating system used, computing performance, 
application software, connecting method, media type, media size and 
job complexity.Up to 20 ppm (A4), 21 ppm (Letter)
Duplex printing 
speedUp to 7 ipm (A4/Letter)
First print out 
timeBlack & 
WhiteFrom ready: Less than 25 seconds
From coldboot: Less than 75 seconds
ColorFrom ready: Less than 25 seconds
From coldboot: Less than 75 seconds
Print resolutionMax. 2,400 x 600 dpi effective output
Printer languageSPL, PostScript 3, PCL5ce and PCL6
OS compatibilityb
b. Visit www.dell.com to download the latest software version.• Windows: 2000/XP/2003/2008/Vista
• Linux: RedHat 8.0~9.0, Mandrake 9.2~10.1, 
SuSE 8.2~9.2, Fedra Core 1~4
• Macintosh: Mac OS X 10.3~10.5, Universal Mac
Interface• High speed USB 2.0
• Ethernet 10/100 Base TX (embedded type)
ITEMDESCRIPTION
CompatibilityTWAIN standard/WIA standard
Scanning method
Color CCD
Resolutiona
a. Due to the applications for scanning, the maximum resolution might 
differ.TWAIN 
standard/ 
WIA standard• Optical: Up to 600 x 1,200 dpi
• Enhanced: Up to 4,800 x 4,800 
dpi
Scan to USB 100, 200, 300 dpi
Scan to E-
mail100, 200, 300 dpi
Scan to PC 75, 150, 200, 300, 600 dpi
Network Scan 
File formatPDF, TIFF, JPEGb, BMP
b. JPEG is not available when you select the mono mode in scan color.
Effective 
scanning length• Scanner glass: 289 mm (11.38 inches)
• DADF: 348 mm (13.7 inches)
Effective 
scanning widthMax. 208 mm (8.2 inches)
Color bit depth• Internal: 36 bit
• External: 24 bit
Mono bit depth• 1 bit for black & white mode
• 8 bit for gray scale
ITEMDESCRIPTION
Copy Speeda
a. Copy speed is based on Single Document Multiple Copy.Up to 20 cpm (A4), 21 cpm (Letter)
Copy 
resolutionText • DADF: Up to 600 x 600 dpi
• Scanner glass: Up to 600 x 600 dpi
Text/photo Up to 600 x 600 dpi
Magazine Up to 600 x 600 dpi
Photo • DADF: Up to 600 x 600 dpi
• Scanner glass: Up to 1,200 x 1,200 
dpi
Zoom range• DADF: 25% to 100%
• Scanner glass: 25% to 400%
 
						

							90 | Specifications
FACSIMILE SPECIFICATIONS
ITEMDESCRIPTION
CompatibilityITU-T G3
Applicable linePublic Switched Telephone Network (PSTN) or 
behind PABX
Data codingMH/MR/MMR/JBIG/JPEG
Modem speed33.6 Kbps
Transmission 
speedUp to 3 seconds/pagea
a. Standard resolution, MMR(JBIG), Maximum modem speed, Phase ”C” 
by ITU-T No. 1 chart, Memory Tx, ECM.
Maximum 
document length356 mm
ResolutionColor 200 x 200 dpi
Black • Standard: Up to 203 x 98 dpi
• Fine: Up to 203 x 196 dpi
• Super Fine: Up to 300 x 300 dpi 
(Receiving only)
Memory4 MB (Approx. 200 pages) 
Halftone256 levels