compaq lte elite User Manual
Have a look at the manual compaq lte elite User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 65 Compaq manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9. While holding the eject override mechanism in the released position, press the computer slightly toward the rear of the expansion base. 10. Remove the tool from the override mechanism slot. 11. Remove the computer. 12. Slide the expansion base fully onto the table. 13. Remove the computer, being careful not to lift up on it until it is fully removed from the expansion base. NOTE: If the computer does not eject using the manual eject override method, the docking mechanism may have to be removed (Section 9.12). D.2 Docking The Compaq LTE ELITE In The Compaq LTE Lite Desktop Expansion Base The Compaq LTE Elite can be manually docked in the Compaq LTE Lite Desktop Expansion Base after installing the upgrade adapter from the Compaq LTE Lite Desktop Expansion Base Upgrade Kit (Table 3-14). Connecting the Upgrade Adapter
To install the upgrade adapter on the Compaq LTE Lite Desktop Expansion Base, complete the following steps: 1. Turn off the expansion base. 2. Remove the Compaq LTE Lite monitor support cover and extender panel if installed. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>>>
NOTE: The upgrade adapter must be removed from the Compaq LTE Lite Desktop Expansion Base when docking the Compaq LTE Lite. To remove the upgrade adapter, simultaneously press the release buttons on the rear of both side rails of the adapter while pulling the adapter forward to disconnect the 198-pin external options connector. Docking the Computer To dock the Compaq LTE Elite in the Compaq LTE Lite Desktop Expansion Base, complete the following steps: 1. Install the upgrade adapter on the expansion base (refer to Connecting the Upgrade Adapter). 2. Turn the expansion base off. 3. Connect the expansion base to an electrical outlet. 4. Turn off and disconnect any external devices that are connected to the computer.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>>>>>
10. Turn on external devices that are connected to the expansion base. 11. Turn the system on with the power button on the expansion base. NOTE: The first time you dock the computer in the expansion base or when you install new devices, the system detects a configuration change and may prompt you to run Computer Setup. Refer to Section 6.7 for more information on running Computer Setup. IMPORTANT: Do not undock from the expansion base before reading the next section, Undocking the Computer. Undocking the Computer To undock the Compaq LTE Elite from the Compaq LTE Lite Desktop Expansion Base, complete the following steps: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>>
1. Remove any cable or card that does not allow the PCMCIA door to fully close. 2. Save and close all open files. 3. Turn off the system by pressing the expansion base power button. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>>
D.3 Docking The Compaq LTE ELITE In The Compaq Ministation NOTE:The Compaq LTE Lite Family of Personal Computers cannot dock in the Compaq MiniStation/EN or the Compaq MiniStation/TR convenience base. Docking the Computer To dock the Compaq LTE Elite in the Compaq MiniStation/EN or the Compaq MiniStation/TR convenience base, complete the following steps: 1. Connect the convenience base to an electrical outlet. 2. Turn off and disconnect any external devices that are connected to the computer. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION >>>>>>>
the front of the convenience base to the fully forward position (Figure D-14). 8. Place the computer on the convenience base guide rails and slide it toward the back until you feel a slight resistance (Figure D-15).
9. Push the lever toward the back of the convenience base (Figure D-16).
10. Turn on the external devices that are connected to the convenience base. 11. Turn on the system, using either the convenience base power button [1] or the computer power switch [2] (Figure D-17).