Comdial Unisyn System Manual

Station Programming3.7.27 Prime Line-Prime Group
And Prime Intercom
Description:If you assign a group of lines, an intercom line, or one individual line to a particular station for use as its
prime line, the station automatically selects that line for use when the user takes it off-hook.Single line
telephones must have either line groups or intercom already programmed.
Default = Prime Intercom (All LEDs = On)
To Program:1.Dial 53 “STATION FEATURES”
2.Dial 15 “PRIME LINE ”
3a.Assign prime 1ine”PRIME LINE...

Station ProgrammingIMI6&I123.7.29 Ringing Line Preference
Description:When you assign this feature to a station, that station will automatically answer a ringing line when its user
goes off-hook. The ringing line shows as an orange LED (only when you have canceled 
Ringing Line
Preference).IST ports must have ringing line preference assigned.
NOTE: Without Direct Ringing assigned, Ringing Line Preference will only function on transferred calls.
Default = Feature enabled (Al-Al6 LEDs = On)
To Program:1....

IMI66-112Station Programming
3.8 Button Mapping
(Non-Square System
Configuration)
Description:You can assign (map) every programmable “A- field” and “B-field” button at each station to be direct
station select (DSS) buttons that provide quick access to system stations, to be special purpose buttons that
:;provide telephone users one-button access to features, or to be idle buttons that provide autodial locations,..‘., 2‘:i I’ ;for the station user.You can also assign B-field buttons to be line select...

IMI66-1123.8.2 Blank Buttons
Description:Blank those buttons that you want to be speed dial buttons.NOTE:
When blanking buttons, be sure a previously assigned button is idle (feature not selected by user) before
you blank it.
To Program:1.Dial 56 “‘BUTTON MAPPING”
2. Dial 
04 ‘BLANIUAUTODIAL.”3.Select button(s) to be cleared: Press Al 
- A16, Bl - B6
4. Dial#5.Select station ports to be programmed with this blank button assignment: Station 10 
- 25,Dial 10 
- 25 or press Al-Al6
6.Dial 
+K for further...

IMI66112Stfztion Programming3.8.4 Do Not Disturb (DND) Button
1:.  . :
Description:Pressing the DND button prevents other stations from ringing the DND station.
To Program:1.Dial 56 “BUTTON MAPPING ”
2.Dial 07 ‘ASSIGN DND CODE ”
3.Select button to be programmed: Press Al - A16, Bl - B6
4.Select station ports to be programmed with a DND button: Station 10 - 25, Dial 10 - 25 or pressAl-Al6
5.Dial A+ for further DND button assignment,
-OR-
Dial +K +K for next button mapping feature,
-OR-
Dial +K % # for...

Station ProgrammingIMI66-I12
3.8,6 Line Button
Description:
Line select buttons provide access to outside lines.To Program: 1.
Dial 56‘BUTTON MAPPING ”
2.Dial 02 “ASSIGN LINE”
3.Select button to be programmed:- Press Bl - B6,
4.Select line ports to be assigned.- Line port l- 6 = Dial 01 - 06 or Press Bl - B6
5.Repeat steps 3 and 4 until all lines are assigned
6.Dial # to finish button mapping
7.Select station port to be programmed: Station 10 - 25: Dial 10 - 25 or press Al-A16
8.Dial +K for further...

IMIH-112Station Programming
3.8.9 Dual Intercom Button
Description:You can assign a second intercom button to stations that may make many intercom calls.
To Program:1.Dial 56 “‘BUITON MAPPING ”
2.Dial 05 “ASSIGN 2ND ITCM ”
3.Select button to be programmed:- Press Al - A16, Bl - B6
4.Select station ports to be programmed with a second intercom button: Station 10 - 25, Dial 10 - 25or press Al-Al6
5.Dial +k for further intercom button assignment,
-OR-
Dial +& +K for next button mapping feature,
-OR-
,Dial...

Station ProgrammingIMI66-1123.8.12 Shift Button
Description:You can use a shift button to access autodial numbers that are programmed under DSS buttons. At default,
the shift button appears at the location of your 
DSS/BLF button.
To Program:1.Dial 56 “‘BUTON MAPPING ”2. Dial 18 “ASSIGN 
SHIFT
3.Select button to be programmed: Press Al - A16, Bl - B6
4.Select station ports to be programmed with a Shift button: Station 10 - 25, Dial 10 - 25 or pressAl-Al6
5.Dial +jC for next shift button assignment,
-OR-...

.  .  .I.:, :5.. I,.‘.
,
., ,.;.
IMI66-112
3.9 Voice Mail Interface +kVoice Mail--NOTE: The 
+K denotes that this feature is currently a future feature.
The Unisyn system supports the use of the Comdial proprietary voice mail system. In addition to the required
programming task of identifying the station ports as voice mail ports, there are several other programming
considerations associated with voice mail operation that are optional for use as needed.
NOTE: A lighted LED next to the programming button...

Voice MailIMI66-I123.9.2 Voice Mail Port-Direct Ringing
For Automatic Attendant Operation
Description:
With this feature, the voice mail system automatically answers any line that is ringing at a voice mail port.
You must choose a ringing assignment for the lines that you have assigned to the voice mail ports before
the voice mail system can provide the automatic attendant feature.Default 
= No direct ring (All LEDs = Off)To Program:1. Dial 54 
“STA/LINE CONFIG”2. Dial 1 
‘DIRECTRING”
3.Select line ports...