Comdial Unisyn System Manual

IMI66-112IStation Programming
3.7.5 Automatic Hold
Description:When you enable this feature, the telephone user can automatically place an existing line call on hold when
she or he presses another line button to answer a second call.
Default = Not enabled (AH LBDs = Off
To Program:1.Dial 53 “STATION FEATURES”
2. Dial 11 ‘AUTO HOLD 
”
,..;: :...;:,
3.Select station ports (LED On = Feature Assigned): Station 10 - 25, Dial 10 - 25 or press Al - A16
4.Dial +K for next station feature,
AOR-
Dial f # for...

Station ProgrammingZMZ6W123.7.7 Automatic Privacy
Description:You can make a line private or non-private. In the private mode, a station has exclusive use of a line during
a call.This information is repeated in 3.6.3. You do not need to program this feature again if you have
done so in 3.6.3.
Default = Privacy (BI -B6 LEDs = Ofi
To Program:1.Dial 40 “PRIVACY RELEASE ”
2.Select line ports to be non-private (LED On = Non Private Port)r-..:
Line port l-6 = Dial 01 - 06 or Press Bl - B6:-.
3.Dial +K for...

IMI6&I12Station Programming3.7.9 Call Forward On Busy/Ring 
- No Answer
Description:The system can automatically forward busy and ring-no answer calls.When a user places a call to station
A, for example, that call can be automatically forwarded to any other station associated by intercom hunt
group. Use this feature to arrange for calls to cycle rapidly through such associated stations testing each
one in turn with several rings. You can set stations within the hunt group to ring at different intervals....

Station ProgrammingIn@%-I12
3.7. I ICall Origination Denied
(Line Origination Denied)
Description:You can deny users of selected stations the ability to originate calls on specified lines. This feature does not
prevent the user from answering incoming calls on these lines.
Default = None denied (AU LBDs = Off)
NOTE: This feature and all level 54 programming features are toggle on/toggle ofl the feature defaults m
enabled, dialing the code automatically disables the feature.Similarly, if the feature...

IMI66-1 I2
_. ;
: :
Station Programming
3.7.13Dedicated ITCM For Attendant
Description:An intercom link can be reserved for exclusive use by a station.This feature should be used for stations
that process a high rate of calls, usually the attendant.
Default = None dedicated (AU LEDs = O&l
To Program:1.Dial 53 “STATION FEATURES”
2.Dial 17 “‘RESERVE ITCM”
3.Dial 1-5 for link l-5
(For 308, dial l-2, For 616, dial l-5)
4.Select station port (LED On = Feature Assigned): Station 10 - 25, Dial 10 - 25 or press...

Station ProgrammingIM166112
3.7.16 Flexible RinginAssignments-Direct/Delayed inging
%
Description:You must program ringing assignments on a per station/per line basis.You can control ringing for every
line that has appearance at a station-assigning immediate, or direct, ringing to some lines and delayed
ringing to others.
Default = Direct ring all lines on stations 10 and 17 (Bl-B6, AI, A8 LEDs = On)
NOTE: This feature and all level 54 programming features are toggle on/toggle 08If the 
enabled, dialing...

IMI66-112Station Programming
.:
3.7.18 Flexible Ringin tdFgnmen ts-Night Ringing 
/#
Description:After you have assigned Night Ringing to the stations and lines desired, the attendant must enable the
feature to activate night ringing.Default = (Al 
LED = Ofi
NOTE: You can program a speed dial button at the attendant’s telephone with a ?k # 0 3 string for easy activation.
.“ L-,:To Program:1.Dial 03 “NIGHT XFER XXX ”
2.Press Al to toggle between enable and disable (LED On = Enabled)
-OR-
,Dial 1 to enable...

Station ProgrammingIMI46-112
3.7.20 FIexible Station NumberingDescription:
The system supports a flexible station numbering plan for calling individual stations. You can program
each station port to respond to the dialing of any available number between 10 and 79, 100 and 799, or
1000 and 7999. However, the system will not allow you to assign an extension number conflict such as 15
and 1500.
Default = IO - 25To Program:
1.Dial 52 “ASSIGN EXT. NUM. ‘I
2.Select station port: “EXT. XxXx ” - Station 10 - 25...

IMI6&1 I2
.’
Station Programming3.7.23 Idle Line Preference
Description:When you enable idle line preference, a station will automatically connect to any assigned and idle line
when the user takes the station off hook.
Default = None enabled (All L,EDs = OjjI
NOTE: If you have already assigned prime ITCM, you must remove it in order to assign Idle Line Preference.To
Program:1.
2.
3.
4.
5.
46.
7.Dial 54 
‘STA/LINE CONFIG. ”Dial 7
“IDLE LINE PREF. ”
Select line ports (LED On = Selected Port)
Line port 
l-...

St.&ion ProgrammingZMZ66-1123.7.25 Personal Ringing Tones
Description:You can program stations to ring in one of four distinctive tones:
1.509/610 Hz @ 10 Hz warble
2.763/1016 Hz @ 10 Hz warble
3.509/610 Hz @ 19 Hz warble
4.
763/1016 Hz @ 19 Hz warble
Default = Tone 1 (Al-Al6 LEDs = On)
To Program:1.Dial 53 “STATION FEATURES”
2.Dial 14 “RINGING TONE”
3.Select Ringing Tone
Dial 
1 for tone 1“RINGING TONE 1”
Dial 2 for tone 2“RINGING TONE 2”
Dial 3 for tone 3“RINGING TONE 3”
Dial 4 for tone 4“RINGING TONE...