Comdial ExecuTech Model XE Key System Instructions Manual

							I Enter Base Level: Press ITCM, then dial + # 2 3 6 %. 
I 
Automatic Pause Insertion: When the 
system stores a dialed number for later 
redial, it automatically stores a pause 
whenever the user waits between 
digits. The wait period is programmable. 
Tone or Voice Signalling: Intercom 
calls can be tone signalled or voice 
signalled. The first choice in signalling 
is programmable. 
Exclusive Hold: The user can set a 
hold condition whereby only the station 
placing the call on hold can retrieve it. 
Exclusive hold can be disabled by 
programming action. 
Call Pickup System: A call can be 
answered at one telephone when it is 
ringing at another telephone. Call 
pickup can be disabled by 
programming action. Dial 15. 
Press prog. key Al. 
LED ON = 750 msec. 
Press t for next feature. 
Dial 15. 
Press A2 
LED ON = TONE 
Press 8 for next feature. 
Dial 15. 
Press A3. 
LED ON = ENABLED 
Press * for next feature. 
Dial 15. 
Press A4. 
LED ON = ENABLED 
Press * for next feature. KEY Al 1 Al 
TIME 750 Msec fg,&& :: ..i’ 
ENTRY 
.KEY A2 
A2 .-m 
FEA. TONE VOICF : 
ENTRY 
KEY A4 
A4 
FEA. FNABLED ‘Dlu 
ENTRY 
Press +N SPKR to end programming.  
						

							Enter Base Level: Press ITCM, then dial t # 2 3 6 %. 
I 
Pulse/Tone Switchable: When rotary 
dial lines are installed, the user can 
switch from pulse (rotary dial signals) 
to tone (Dual Tone Multiple Frequency 
signals) for accessing special circuits 
requiring DTMF tones such as banking 
machines. This pulse/tone switchability 
must be programmed for the line. 
Lines are defaulted for tone signalling 
only. 
Abandoned Hold Release: When a 
distant party abandons a hold condition 
and disconnects, the central office will 
send a forward disconnect signal to the 
key system. The forward disconnect 
signal may be either 50 msec. or 350 
msec. in length. Program the system 
to match the central off ice time. 
Automatic Privacy: A line can be 
made private or non-private. In the 
private mode, a station has exclusive 
use of a line during a call. Lines are 
private unless re-programmed to be 
non-private. Dial 36. 
Press prog. key. 
LED ON = TONE 
Press * for next feature. 
Dial 37. 
Press prog. key. 
LED ON = 50 msec. 
Press * for next feature. 
Dial 36. 
Press prog. key. 
LED ON = NON-PRIVATE 
Press * for next feature 
,I 
Press 4c SPKR to end programmmg.  
						

							Enter Base Level: Press IT&M, then dial +k # 2 3 6 %. 
‘ott Definition: A station port can be 
lrogrammed to accept one of several 
lifferent types of station equipment or 
o support off-hook call announce 
:onnections. 
‘lexible Ringing Assignment: 
qinging assignments are 
)rogrammable on a per line/per station 
lasis. Delayed ringing can be program 
enabled for some lines and direct, or 
mmediate, ringing can be program 
enabled for others. Dial 61. 
Dial port ID (10-33). 
Press prog. key. 
l Al = 3/8 LINE KEYSET 
l A2 = 22 LINE KEYSET 
. A3 = OFF-HOOK CALL 
ANNNOUCE 
l A4 = OPX UNIT 
l A5 = DSSlBLF CONSOLE 
l A8 = LCD SPEAKERPHONE 
Press # + PORT ID for next sta 
OR 
Press * for next feature. 
Direct ringing 
Dial 50. 
Dial port ID (1033). 
Press Al-A5, A8-A12 
[for lines l-l 0) 
Press # + PORT ID for next sta 
DR 
Press f for next feature. 
Ielayed ringing 
Iial 51. 
Iial port ID (10-33). 
‘ress Al -A5, A8-A12 
:for lines l-1 0). 
‘ress # + PORT ID for next sta, 
3R 
‘Tess * for next feature. 
Press +k SPKR to end programming.  
						

							Enter Base Level: Press ITCM, then dial * # 2 3 6 +k 
Night Transfer (of ringing): The day, 
or normal, ringing of incoming lines can 
oe transferred to a particular station or 
stations by the attendant for off-hour or 
special purpose answering. Stations 
are assigned to receive night transfer 
by programming action. 
Access Denied:.Access to particular 
lines can be denied at individual 
stations. 
Originating Denied: The ability to 
originate calls on certain lines can be 
denied at individual stations. 
Privacy Release: A line can be made 
Ion-private at a particular station while 
remaining private at all other stations. 
Stations can be programmed to 
automatically release line privacy when 
in certain lines. Dial 56. 
Dial port ID (10-33). 
Press AI-A5, A8-AI2 (for line: 
I-IO). 
Press # + PORT ID for next st; 
OR 
Press * for next feature. 
Dial 52. 
Dial port ID (10-33). 
Press AI-A5, A8-A12 (for line! 
I-10). 
LED ON = DENIED 
Press # + PORT ID for next st, 
OR 
Press ++ for next feature. 
Dial 53. 
Dial port ID (10-33). 
Press AI-A5, A8-AI2 (for line: 
l-10). 
LED ON = DENIED 
Press #‘+ PORT ID for next st, 
OR 
Press Q for next feature. 
Dial 54. 
Dial port ID (10-33). 
Press Al-A5, A8-AI2 (for line! 
i-10). 
LED ON-= RELEASED 
Press # + PORT ID for next st; 
OR 
Press + for next feature. 
Press * SPKR to end programming.  
						

							IL- 
E inter Base Level: Press ITCM, then dial % # 2 3 6 +kc. 
I 
dle Line Preference: Going off-hook 
automatically selects an idle line for 
rse. Lines available for selection are 
rssigned by programming. 
Iinging Line Preference: A ringing 
ne will automatically be answered 
vhen a station is taken off-hook. 
‘rime Line: A line designated to a 
)articular station is automatically 
ielected for use when that station is 
aken off -hook. 
Ml-Call and Zone Paging: Stations 
:an receive voice announcements 
hrough the telephone speaker, or 
hrough an external paging speaker 
:onnected to a PA port, and transmit 
hem with the telephone handset. 
Announcements can be to certain 
areas of the system or to all stations in 
he system. 
-I 
Iial 55. 
Iial port ID (10-33). 
‘ress Al-A5, A8-A12 (for line 
l-10). 
‘ress # + PORT ID for next si 
3R 
‘ress * for next feature. 
Iial60. 
Iial port ID (10-33). 
‘ress prog. key A8. 
-ED ON = AS’GND 
Yess # + PORT ID for next sl 
3Fl 
‘ress *for next feature. 
Iial57. 
Dial port ID (10-33). 
Press Al-A5, A8-A12 (for lint 
l-l 0) or press ITCM. 
?ress # + PORT ID for next si 
OR 
Press *for next feature. 
Dial 58. 
Dial port ID (10-33). 
Press prog. key. 
1 Al = RECEIVE ZONE 1 
m A2 = RECEIVE ZONE 2 
. A3 = RECEIVE ZONE 3 
m A4 = RECEIVE ALL-CALL 
. A5 = XMIT ZONE 1 
. A8 = XMIT ZONE 2 
. A9 = XMIT ZONE 3 
. A10 = XMIT ALL-CALL 
Press # + PORT ID for’next s 
OR 
Press % for next feature. STATION 
10 11 12 13 14 15 16 17 10 19 20 21 22 23 24 25 26 27 26 29 30 31 32 33  
						

							Enter Base Level: Press ITCM, then dial ++ # 2 3 6 0. 
I 
Personal Ringing Tones: A station 
:an be programmed to ring in one of 
‘our distinctive tones. 
External Paging Interface - Station 
Port: A station port can be 
programmed to interface with an 
external paging amplifier (PA port). 
ieadset Interface: A station port can 
)e programmed to allow headset 
operation. Dial 60. 
Dial port ID (10-33). 
Press prog. key. 
l Al=TONEl 
l A2=TONE2 
l A3=TONE3 
.A4=TONE4 
Press # + PORT ID for next sta 
OR 
Press * for next feature. 
Dial 60. 
Dial port ID (lo-3$. 
Press prog. key A5. 
Press # + PORT ID for next sta 
OR 
Press * for next feature. 
Dial 60. 
Dial port ID (10-33). 
Press prog. key A9. 
Press # + PORT ID for next sta 
OR 
Press * for next feature. 
10 11 12 13 14 15 16 17 18 10 20 STATION 21 22 22 24 25 26 27 28 29 30 31 32 3? 
Press % SPKR to end programming.  
						

							Enter Base 
						

							PrcYgrammini Instruct&s 
;, . 
SECTldN 4 
ATTENDANT PRbGRAMMlNG 
Attendant programming can be performed from station 
10 at any time during system operation. 
NIGHT TRANSFER 
.+ 
(of ringing) 
The day, or normal, ringing of incoming linescan be 
transferred to a particular station or stations by the 
attendant for off-hour or special purpose answering. 
Press 
ITCM % # . 
Dial 03. 
Press prog. key 
Al to toggle feature on or off. The 
light next to program key 
Al will turn on when night 
transfer is active. 
Press +K for next feature. 
MUSIC ON HOLD 
Music is provided to outside lines that are placed on 
hold if an external music source is connected to the 
system. Music on hold can be disabled by attendant 
action. 
Press 
ITCM % # . 
Dial 04. 
Press prog. key 
Al to toggle feature on or off. The 
light next to the program key 
Al will turn on when 
music on hold is active. 
Press * for next feature. 
SYSTEM SPEED DIALING 
A special system-wide list of numbers can be 
programmed for automatic dialing by all users. 
l Press ITCM 4+ #. 
l Dial 02. Q Dial number (up to 15 digits). 
l Press T/C key for next location and repeat 
procedure. 
-OR- 
* Press 
SPKR to quit. -OR- 
* Press T/C key, then press +K for next feature. 
SYSTEM CLOCK 
If the system has been modified to provide LCD 
speakerphone support, the system clock can be 
programmed to maintain current date and time 
information. 
Press 
ITCM ++G #. 
Dial 01. 
Dial two digits (00-99) for year. 
Dial two digits 
(01-12) for month. 
Dial two digits 
(01-31) for day. 
Dial two digits (00-23) for hour. 
Dial two digits (00-59) for minute. 
Dial one digit 
(l-7) for day of week 
-- Sun. = 1, Sat. = 7. 
Press 
SPKR. 
l Dial location (01-30). 
l Press line key for pre-select (if desired). 
4-28  
						

							. 
STATION IO - PROGRAMMING OVERLAY 
l Cut out along border. 
l Cut out shaded openings. 
l Fit over station faceplate. 
Al 
A3 
A4 
TAP 
SPKR 
A8 
A9 
AI0 
All 
T/C 
MUTE 
PPOO3-002 
83 B5 
82  
						

							STATION IO - PROGRAMMING OVERLAY 
l 
Cut out along border. 
l Cut out shaded openings. l Fit over station faceplate. 
A0 
A2 A9 
A3 AI0 
A4 
A5 Al2 
Al3 
EXECUTECH PROGRAMMING 
OVERLAY 
PPOO3-003 
TAP SPKR MUTE T/C 
HOLD BI 82 I TCM