Comdial ExecuTech Model XE Key System Instructions Manual
Have a look at the manual Comdial ExecuTech Model XE Key System Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 133 Comdial manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Enter Base Level: Press ITCM, then dial #c # 7 4 6 +k. I Pulse/Tone Switchable: When rotary dial lines are installed, the user can switch from pulse (rotary dial signals) to tone (Dual Tone Multiple Frequency signals) for accessing special circuits requiting DTM.F tones such as banking machines. This pulse/tone switchability must be programmed for the line. Lines are defaulted for tone signalling 2nly. Abandoned Hold Release: When a distant party abandons a hold condition and disconnects, the central office will send a forward disconnect signal to the key system. The forward disconnect signal may be either 50 msec. or 350 msec. in length. Program the system to match the central office time. Automatic Privacy: A line can be made private or non-private. In the private mode, a station has exclusive use of a line during a call. Lines are private unless re-programmed to be non-private. Dial 36. Press prog. key. LED ON = TONE Press *for next feature. Dial 37. Press prog. key. LED ON = 50 msec. Press 4~ for next feature. KEY Al A2 A3 A4 A5 A0 A9 A10 All Al2 LINE 1 2 3 4 5 6 7 8 9 10 ENTRY pq$J@q Dial 36. Press prog. key. LED ON = NON-PRIVATE Press * for next feature Press t SPKR to end programming. :
I Enter Base Level: Press ITCM, then dial % # 7 4 6 %. I ‘art Definition: A station port can be brogrammed to accept one of several lifferent types of station equipment or o support off-hook call announce :onnections. ‘lexible Ringing Assignment: qinging assignments are )rogrammable on a per line/per station oasis. Delayed ringing can be program enabled for some lines and direct, or immediate, ringing can be program enabled for others. Iial61. 3ial port ID (10-33). ‘ress prog. key. 1 Al = 3/8 LINE KEYSET 1 A2 = 22 LINE KEYSET 1 A3 = OFF-HOOK CALL ANNNOUCE 1 A4 = OPX UNIT 1 A5 = DSS/BLF CONSOLE 1 A8 = LCD SPEAKERPHONE ‘ress # + PORT ID for next st: 3R ‘ress * for next feature. Xrect ringing Iial50. Iial port ID (10-33). ‘ress Al-A!& A8-A12 :for lines l-l 0) Press # + PORT ID for next st OR Press % for next feature. Delayed ringing Dial 51. Dial port ID (10-33). Press Al-A5, A8-A12 (for lines l-10). Press # + PORT ID for next st OR Press *for next feature. Press +% SPKR to end programming.
Enter Base Level: Press ITCM, then dial +lc # 7 4 6 %. I Night Transfer (of ringing): The day, or normal, ringing of incoming lines can be transferred to a particular station or stations by the attendant for off-hour or special purpose answering. Stations are assigned to receive night transfer by programming action. Access Denied: Access to particular lines can be denied at individual stations. Originating Denied: The ability to originate calls on certain lines can be denied at individual stations. Privacy Release: A line can be made non-private at a particular station while remaining private at all other stations. Stations can be programmed to automatically release line privacy when on certain lines. Dial 56. Dial port ID (10-33). Press Al-A5, A8-A12 (for line! l-10). Press # + PORT ID for next sti OR Press +k for next feature. Dial 52. Dial port ID (10-33). Press Al-A5, A8-A12 (for line: l-10). LED ON = DENIED Press # + PORT ID for next st; OR Press *for next feature. Dial 53. Dial port ID (10-33). Press Al-A!& A8-A12 (for line: l-10). LED ON = DENIED Press # + PORT ID for next st; OR Press *for next feature. Dial 54. Dial port ID (10-33). Press Al -A5, A8-A12 (for line: l-10). LED ON = RELEASED Press # + PORT ID for next St; OR Press f for next feature. I ~~~~- Press ++ SPKR to end programming
Enter Base Level: Press ITCM, then dial C # 7 4 6 *. I Ml-Call and Zone Paging: Stations :an receive voice announcements hrough the telephone speaker, or hrough an external paging speaker :onnected to a PA port, and transmit hem with the telephone handset. Jnnouncements can be to certain areas of the system or to all stations in he system. Dersonal Ringing Tones: A station ;an be programmed to ring in one of our distinctive tones. External Paging Interface - Station Port: A station port can be programmed to interface with an external paging amplifier (PA port). Headset Interface: A station port can be programmed to allow headset operation. Dial 58. Dial port ID (10-33). Press prog. key. 1 Al = RECEIVE ZONE 1 1 A2 = RECEIVE ZONE 2 1 A3 = RECEIVE ZONE 3 1 A4 = RECEIVE ALL-CALL b A5 = XMIT ZONE 1 1 A8 = XMIT ZONE 2 b A9 = XMIT ZONE 3 b Al 0 = XM IT ALL-CALL Press # + PORT ID for next st; DR Press X for next feature. Dial 60. Iial port ID (10-33). Press prog. key. lAl=TONEl lA2=TONE2 lA3=TONE3 mA4=TONE4 Press # + PORT ID for next st; OR Press * for next feature. Dial 60. Dial port ID (10-33). Press prog. key A5. Press # + PORT ID for next sti OR Press * for next feature. Dial 60. Dial port ID (10-33). Press prog. key A9. Press # + PORT ID for next st OR Press +c for next feature.
/ ” Base Level: Press ITCM, then dial % # 7 4 6 *. , very station can be assigned tdividually (mapped) to select any line l Dial port ID (10-33) ssigned to that station or to provide l Press station key ther key functions. Soft keys can be ssigned as direct station select (DSS) eys to provide one-key access to l Dial code for key per ystem stations. Soft keys can be ssigned as idle to provide autodial eys for the user. l Al-A5 = LINES l-5 l A8-A12 = LINES 6-10 l IO-33 = DSS STA. Press # + PORT ID for next sta Press * for next feature. B2 = Line 2 B7 = Line 7 B3 = Line 3 88 = Line 8 ‘ess t SPKR to end programming.
IMI 66-064 Programming Instructions SECTION 3 SYSTEM ADMINISTRATION PROGRAMMING System administration programming is usually NOTE: A current program setting is indicated by a performed by on-site personnel. This programming lighted LED next to the applicable progamming procedure provide a means for programming all key. When a toggle (on/off) action is provided system variables, except line attributes, to match site by a single key, the lighted LED indicates when requirements. the feature is active. Perform administration programming as follows: l Press A-field key to choose new programming. l Enter base level: ITCM +k # 2 3 6 +c l Press +++ to return to base level for next feature. l Mark the desired selections in the charts to record programming needs. -OR- . Press +K SPKR to end programming. l Dial feature code. 4-17
, Enter Base Level: Press ITCM, then dial k # 2 3 6 %. ‘Pause Time: During. auto dials and ‘speed dials it is sometimes necessary todelay the sending of digits to give switching equipment time to prepare to receive the digits. A pause can be stored to effect the delay. A pause is stored whenever the user presses the HOLD key. The pause length options are stored in seconds. Pulse Dial Time: Either ten or twenty pulses per second, and three different make/break ratios for the pulse dialing signals (rotary dial signals) can be set to match CO requirements. Recall/Flash: A line disconnect (recall) or a PBX feature select signal (flash) can be generated depending upon the programmed time. Timed Hold Recall: After a call has been on hold for a programmed length of time, the system will recall the station that placed the call on hofd. The timing is fn seconds. Dial 10. Press prog. key. Press * for next feature. Dial 11. Press prog. key. Press * for next feature. Dial 12. Press prog. key. Press t for next feature. Dial 13. Press prog. key. Press +N for next feature. SHADING = DEFAULT KEY 1 Al A2 A3 A4 62/36 @’ 20 ps RATIO &I36 m, lO&bs 50/50 @ 10 ENTRY 1 pps 70130 @ 10 pps KEY Al A2 A3 A4 A5 A0 A9 A10 All Al? SEC 060 ENTRY’ ’ 300 .500 .600 .750 ,675 1.0 1.5 2Jk ,, 3.0 1 Press % SPKR to end programming. 1
Enter Base Level: Press ITCM, then dial % # 2 3 6 ++. I Flexible Toll Restriction: Restricts stations from dialing a range of number combinations while allowing specific exceptions. The restrictions are specified by entries on a deny table while the exceptions are specified by entries on an allow table. In addition, a pre-programmed 1+800 allow table allows that dialing feature regardless of other restrictions which may be in effect. These programmed tables must be assigned on a per station basis before the restrictions can take effect. - Maximum of 8 digits per line entry. - 1+911 and 911 can never restricted. - Allow entries override deny entries. NOTE: The deny and allow entries are part of one toll table. Any stations which receive this table assignment will be subject to both deny and allow restrictions. Dial 14. Select table - Al = DENY ENTRY LINE 1 - A2 = DENY ENTRY LINE 2 - A3 = DENY ENTRY LINE 3 - A4 = DENY ENTRY LINE 4 - A5 = ALLOW ENTRY LINE 1 - A8 q ALLOW ENTRY LINE 2 - A9 = ALLOW ENTRY LINE 3 - A10 = ALLOW ENTRY LINE - Al 1 = ALLOW 1+800 calls Dial number. (# = match anything digit.) Select next table, and repeat. Press % for next feature. ALLOW 3 I 4 I ALLOW 1+800 YES NO I Press +& SPKR to end programming.
[ E inter Base Level: Press ITCM, then dial %+ # 2 3 6 %. I issign restriction to lines: Lines nust be programmed to accept toll estriction before the restriction that is Issigned to the stations will take effect. &sign restrictions to stations: station dialing can be restricted with ,/O toll restriction and with deny/allow oil table restriction. Either one or both nethods can be assigned to restrict ;tation dialing on a per station basis. Use, 1+7-digit dialing can be allowed if /O restriction is assigned. Dial 35. Press prog. keys to assign restriction to lines Press +# for next feature Dial 62. Dial port ID (10-33). Select l/O toll restriction. . Al = l/O RESTRICTION . A2 = ALLOW 1+7-DIGIT (if l/O is also restricted) AND/OR Select deny/allow toll table restriction (if required and programmed). l Press A3. . Dial # + PORT ID for next sta. OR Press * for next feature. STA. ENTRIES [NoNEmwEDj 10 1 1: 4 EH 16 17 18 4 $iiiza 7 28 ! I H 1 33 . . . . I Press +c SPKR to end programming. I