Comdial ExecuTech Model XE Key System Instructions Manual

I Enter Base Level: Press ITCM, then dial + # 2 3 6 %. 
I 
Automatic Pause Insertion: When the 
system stores a dialed number for later 
redial, it automatically stores a pause 
whenever the user waits between 
digits. The wait period is programmable. 
Tone or Voice Signalling: Intercom 
calls can be tone signalled or voice 
signalled. The first choice in signalling 
is programmable. 
Exclusive Hold: The user can set a 
hold condition whereby only the station 
placing the call on hold can retrieve it....

Enter Base Level: Press ITCM, then dial t # 2 3 6 %. 
I 
Pulse/Tone Switchable: When rotary 
dial lines are installed, the user can 
switch from pulse (rotary dial signals) 
to tone (Dual Tone Multiple Frequency 
signals) for accessing special circuits 
requiring DTMF tones such as banking 
machines. This pulse/tone switchability 
must be programmed for the line. 
Lines are defaulted for tone signalling 
only. 
Abandoned Hold Release: When a 
distant party abandons a hold condition 
and disconnects, the...

Enter Base Level: Press IT&M, then dial +k # 2 3 6 %. 
‘ott Definition: A station port can be 
lrogrammed to accept one of several 
lifferent types of station equipment or 
o support off-hook call announce 
:onnections. 
‘lexible Ringing Assignment: 
qinging assignments are 
)rogrammable on a per line/per station 
lasis. Delayed ringing can be program 
enabled for some lines and direct, or 
mmediate, ringing can be program 
enabled for others. Dial 61. 
Dial port ID (10-33). 
Press prog. key. 
l Al = 3/8...

Enter Base Level: Press ITCM, then dial * # 2 3 6 +k 
Night Transfer (of ringing): The day, 
or normal, ringing of incoming lines can 
oe transferred to a particular station or 
stations by the attendant for off-hour or 
special purpose answering. Stations 
are assigned to receive night transfer 
by programming action. 
Access Denied:.Access to particular 
lines can be denied at individual 
stations. 
Originating Denied: The ability to 
originate calls on certain lines can be 
denied at individual...

IL- 
E inter Base Level: Press ITCM, then dial % # 2 3 6 +kc. 
I 
dle Line Preference: Going off-hook 
automatically selects an idle line for 
rse. Lines available for selection are 
rssigned by programming. 
Iinging Line Preference: A ringing 
ne will automatically be answered 
vhen a station is taken off-hook. 
‘rime Line: A line designated to a 
)articular station is automatically 
ielected for use when that station is 
aken off -hook. 
Ml-Call and Zone Paging: Stations 
:an receive voice...

Enter Base Level: Press ITCM, then dial ++ # 2 3 6 0. 
I 
Personal Ringing Tones: A station 
:an be programmed to ring in one of 
‘our distinctive tones. 
External Paging Interface - Station 
Port: A station port can be 
programmed to interface with an 
external paging amplifier (PA port). 
ieadset Interface: A station port can 
)e programmed to allow headset 
operation. Dial 60. 
Dial port ID (10-33). 
Press prog. key. 
l Al=TONEl 
l A2=TONE2 
l A3=TONE3 
.A4=TONE4 
Press # + PORT ID for next sta 
OR...

Enter Base 

PrcYgrammini Instruct&s 
;, . 
SECTldN 4 
ATTENDANT PRbGRAMMlNG 
Attendant programming can be performed from station 
10 at any time during system operation. 
NIGHT TRANSFER 
.+ 
(of ringing) 
The day, or normal, ringing of incoming linescan be 
transferred to a particular station or stations by the 
attendant for off-hour or special purpose answering. 
Press 
ITCM % # . 
Dial 03. 
Press prog. key 
Al to toggle feature on or off. The 
light next to program key 
Al will turn on when night 
transfer is...

. 
STATION IO - PROGRAMMING OVERLAY 
l Cut out along border. 
l Cut out shaded openings. 
l Fit over station faceplate. 
Al 
A3 
A4 
TAP 
SPKR 
A8 
A9 
AI0 
All 
T/C 
MUTE 
PPOO3-002 
83 B5 
82  

STATION IO - PROGRAMMING OVERLAY 
l 
Cut out along border. 
l Cut out shaded openings. l Fit over station faceplate. 
A0 
A2 A9 
A3 AI0 
A4 
A5 Al2 
Al3 
EXECUTECH PROGRAMMING 
OVERLAY 
PPOO3-003 
TAP SPKR MUTE T/C 
HOLD BI 82 I TCM