Comdial Dxp Digitech Phones Instructions Manual

Sending And Receiving Non- Verbal Messages 
LCD MESSAGE LIST 
(Write Attendant Provided Response Messages Here)  

Sending And Receiving Non- Verbal Messages 
Message Deposit 
You can call an LCD speakerphone and arrange for a system-supplied 
message to be shown on its display. This message is for the called 
party to read if she or he is unable to answer your call. Your telephone 
may provide a UNIVERSAL MESSAGE button for this purpose or 
you can pre-program a MESSAGE RESPONSE button on your 
telephone and use it for depositing messages. 
To deposit a message, 
l make call and hear ringing, 
l press UNIVERSAL...

Sending And Receiving Non- Verbal Messages 
I Display (Shows 
message before 
deposit by # button) 
7 
Programmable Buttons 
(May include installer- 
programmed Universal 
Message button or user 
programmed Response 
Message button) 
/# 
59  

Programming Your Telephone 
Programming For Speed Dialing 
Speed dialing is a feature that lets you: 
l dial intercom numbers, lengthy or frequently used numbers, and 
feature codes using one or two buttons, 
You can store numbers for speed dialing at the following locations: 
l at any programmable button that is not now assigned as afixed 
feature button or SHIFT button by the system installer, 
l on a secondary level under a DSS button, a feature button, a line 
button or other speed dial button, 
l at...

Programming Your Telephone 
Personal Speed Dial Number (Upper Button Grouping) 
Personal Speed Dial Numbers (Keypad Button Grouping) 
0 5 
1 6 
2 7 
3 8 
4 9 
Personal Speed Dial Numbers (Lower Button Grouping) 
1 
6 
2 
7 
3 
8 
4 
9 
5 
10 
 
Hint - To record both first and second level storage, write both numbers 
on the same record line. 
Cl  

Programming Your Telephone 
Storing DSS Numbers 
To stow an intercom number as a DSS number, proceed as follows: 
press ITCM, 
dial +k 4+ 3, 
press programmable button to choose DSS location, 
dial extension number, 
press next location button and store next DSS number, 
repeat the previous step until all DSS numbers are stored, 
q 
l press SPKR to end. 
DSS Record (Enter your DSS numbers here if you wish) 
I 
I 
/  

Programming Your Telephone 
I  
-I 
 AWN 
,Programmable 
Buttons (Typical 
DSS storage 
locations) 
/Programmable 
Buttons 
I ITCM 
Button 
L SPKR Button  

Programming Your Telephone 
Storing Personal Speed Dial Numbers (outside num- 
bers and feature codes) 
To store an outside number as a personal speed dial number, 
. press ITCM, 
l dial+tl, 
l press programmable button or keypad button to choose storage 
location, 
l press line button to select line to dial out on, 
l dial any number (up to 16 digits long - include +N and # if needed), 
NOTE: You may need a pause between numbers to cwnpensate for differences in 
reqome time between your system and the...

Programming Your Telephone 
TRAI 
car 
But-h 
3 I,  ’ /Programmable 
Buttons (Personal 
Speed Dial 
Locations) 
W \lF 
317 
1 *Programmable 
Buttons (Persor 
Speed Dial 
Locations) 
‘Programmable 
Buttons (Person 
Speed Dial 
Locations) 
ITCM 
Button lal 
lal 
I L SPKR Button 
65  

Programming Your Telephone 
Storing The Response Message Button 
The response message button allows you to make a non-verbal 
response to a SOHVA call. The response appears in the display of the 
calling telephone. 
To select the response message button, proceed as follows: 
. press ITCM, 
l dial**6, 
l press desired programmable button location, 
l dial (01-30) for message from LCD message list provided by the 
attendant, 
0 press #to save, 
i press SPKR to end, 
l label button location. 
,Programmable...