Comdial Dxp Digitech Phones Instructions Manual

Programming Your Telephone 
RESPONSE MESSAGE LIST 
(Write Attendant Provided Response Messages Here) 
67  

Display Summary 
The displays shown on your telephone during operation are sum- 
marized in this section. 
Display Type When Displayed 
Automatic Callback 
When waiting for a busy telephone to 
signal that it has become idle, the dis- 
play shows that the feature is active. 
Call Costing 
When you push HOLD button after 
Call Forward 
Call Timer 
call, press TAP button. 
X = line number 
66  

Understanding The LCD Displays 
Display Type When Displayed 
Calling Station 
I”“] 
The display shows intercom number or 
name of calling telephone. It flashes in 
right comer of display when ringing. 
Dialed Numbers 
The display will show all dialed num- 
71 co&s. bers or names along with any dialed 
Station: I:,,,,:,, 
Line: 
I Line X 3:05 
9782200 I 
X = line number 
Display Contrast Adjustment 
rl 
Press ITCM, dial * t 5, then dial l-8. 
X= l-8 
Do Not Disturb 
Tue 1 3:05 
Do Not Disturb Display...

Understanding The LCD Displays 
Display Type When Displayed 
Last Number Redial 
r/ When last number dialed is redialed. 
display shows selected line, then dis- 
play shows dialed number. 
LCD Messaging 
I 
Tue 1 3:05 
Back At XX:XX 
xX:xX = user-entered time 
Line Queuing 
When queuing for a line, the display 
will show the queuing arrangement. 
When queued line group calls back, dis- 
play will show the group number. 
‘. I 
Tue 1 3:05 
Camr, On Ln GrD X I 
I 
Tue 1 3:05 
CMP RCL LnGrp X 
I 
X = line...

Understanding The LCD Displays 
Display Type When Displayed 
Paging 
pz&F-j 
Display for zone paging (paging some 
~z2en~~ornme) 
-1 z ~!ZeZ,13ZZgoT~~at.ing 
Programming for StationSpeed Dialing 
. Location After you press ITCM S t 1, this ap- 
pears in the display. 
Preselect After you enter location, this appears in 
display. 
After you enter line, line group or 00 
Saved Number Redial 
ber. 
71  

Using Your Quick Reference Guide 
This quick reference guide provides you with a list of the feature dial- 
ing codes used on the DXP digital communications system. 
77  

Glossary Of Terms 
Glossary 
A 
All-call paging: Paging through the intercoms of all stations in the sys- 
tem. 
Answer button: An installer-programmed button that allows a user to 
answer a call that is audibly ringing at his or her station (it is possible 
for more than one call to be ringing at the same time; however, only 
one of the calls will ring audibly). 
Automatic callback: System will ring a calling telephone when a busy 
called telephone becomes idle. 
Automatic dialing: Using programmable...

Glossary Of Terms 
E 
Exclusive hold: Only the telephone placing the call on hold can 
retrieve it. 
Executive override: Breaking into a conversation at a busy called 
telephone. This intrusion is announced by several quick tone bursts 
over the conversation. 
G 
Group intercom number: A number that is available for use by 
several stations. 
H 
Handsfree answer inhibit: A telephone can be set to block voice calls 
sent to it over the speaker. 
Hookflash: Action that occurs when the TAP button is...

Glossary Of Terms 
Personal ringing tones: A telephone can be arranged to ring in one of 
four distinctive tones. 
Prime line: A line designated to a particular telephone and automat- 
ically selected when the handset is lifted. 
Programmable buttons: Each telephone or station has buttons that 
can be user-programmed for autodialing numbers or feature codes, or 
other special purpose dialing requirements. 
Pulse/Tone switching: Changing from pulse/rotary dial signals to 
tone/DThJF signals. 
R 
Release...

Glossary Of Terms 
V 
Voice call: A verbal intercom call. 
Voice announce blocking: A telephone can be set to block voice calls 
sent to it over the speaker. 
Z 
Zone paging: Paging through the intercoms of some stations or depart- 
ments in the system.