Comdial Dxp Correspondance Instructions Manual

DXP Correspondence ManualStation Programming7,33
Interactive
Button Support
(Softkeys Setup)The system provides support for interactive buttons on LCD
speakerphones with product codes of 
7010s and 7016s (all revisions),
and 
7700s (revision H and earlier). The three interactive buttons and
the associated expanded displays provide quick, easy access to‘system
features and straight-forward button programming without the need
for dialing codes. At default, the interactive button support is
disabled;...

z34
IST Hold
Confirmation
7.35
Transfer Ring
CadenceIndustry-standard telephones sound a special hold confirmation tone
when their users place calls on hold. Prior to this software release,
these telephones returned to intercom dial tone when their users placed
calls on hold. The system defaults with the special confirmation tone
enabled; however, you can disable the feature if you wish. The
confirmation tone is three 80 ms. on -80 ms. off tone bursts repeated
at 800 ms. intervals.
A telephone user can...

DXP Correspondence ManualStation Programming7.36
Ring Back OnBusyIn systems operating with software releases prior to 8.B, when
someone calls another telephone and the calling party is busy on an
outside line, the caller hears a ring back tone-not a busy tone. When
the caller is using a non-display telephone he or she has no means 
,ofknowing the busy status of the called party. (Remember, LCD
speakerphones display called party status- for details on this feature,
see section 6.40, 
Allow Busy Display.)...

Station ProgrammingDXP Correspondence Manual7 37
Button MappingIThe system assigns certain functions to each of the station buttons as a
default condition. Reassign the button functions with this
programming feature. You can assign functions at a first level or at a
By Stationsecond level at each button. Assign functions at the first level that
require status light feedback because the system does not provide
status light feedback to buttons at the second level (press CONTROL
N to display the second...

7.38
Telephone Types
(Phone Types)This programming feature allows you to identify the particular type of
system telephone equipment that you or your installer will connect to
each station port.
You can also mark the station port equipment as undefined so ‘that the
system will not test the port for a specific type of equipment and will
not include the port in any menu presentations. Also refer to Section
7.26, Station Disable, for the procedure for disabling a station port.
NOTE: Depending upon which...

z39
Copy Model
Programming
Block Programming, Class-Of-ServiceProgram some or all class-of-service categories to match the .
programming of a model class-of-service category.
Block Programming, Station FeaturesProgram some or all stations to have the same features as a model
station. The system does not copy the following features from the
model station:
-station name,
-intercom numbers,
-personal speed dial numbers,
-DSSBLF console installed,
-console port,
-alternate attendant,
-overflow attendant,...

Chapter Seven
Review1. The DXP defaults all of the personal intercom numbers, and
you cannot change those numbers; true or false?
Questions
I2. You can program a station name with a maximum
ofcharacters (full station name), but onlyof those
characters show up on an LCD speakerphone (display name).
3. You can program up topersonal intercoms in an
intercom hunt list; you can also program
groupintercoms in the hunt list.
4. All of the intercoms in a hunt list must be group intercoms; true
or false?
5. You...

10. What do call pickup groups do?11.If you have set a toll restriction on a certain area code, there is
no way for any station to dial a number in that area code; true
or false?
12. As long as there is an LCD speakerphone on a port, you can
program that port with limited database programming
capabilities; true or false?
13. You cannot button map or reprogram the interactive buttons
on any of the Impact telephones (models 
701OS, 7016S, and
7700s); true or false?
14. Define button mapping.
15.Once you...

L
8
Line ProgrammingChapter Eight: Programming The Lines
. ..m..................................,........8-I
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
8.10
8.11
8.12
8.13
8.14Introducing Line Programming............................................................
8-1Line Name............................................................................................
8-2LineType..............................................................................................
8-2
GroundStart...

8.15
8.16
8.17
8.18
8.19
8.20
8.21
8.22
8.23
8.24
8.25
8.26Busy Lead Detection..........................................................................8-10Disconnect Supervision......................................................................
8-10Caller IDActive
8-10..................................................................................
VoiceMailID.....................................................................................8-11DISA and DISA Voice...