Comdial Dxp Correspondance Instructions Manual

12.You can program up to nine routes per automatic route
selection table; true or false?
13. Including the “deny-all” and “allow-all” levels, there are a
total oftoll restriction levels.
14.It’s a good idea to give every station the “remote station
disable” feature; true or false?
15. You must turn on line originate and
fully usable.for a line to be
16.The periodic line tone and the maximum call duration tone are
identical: true or false?
17.It is not possible for IST station users to generate an...

DXP Correspondence ManualChapter Con tentsi---T-i
Station ProgrammingChapter Seven: Station Programming
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
7.10
7.11
7.12
7.13Introducing Station Programming........................................................7-1Personal Intercom Number......................................................................

1.14
7.15
7.16
7.17
7.18
7.19
7.20
7.21
7.22
7.23
7.24
7.25
7.26
7.27
7.28
7.29
7.30
7.31
7.32
7.33
7.34
7.35
7.36
7.37
7.38Flexible Ringing Assignments.............................................................7-7
DirectRinging..............................................................................
7-7
Delayed Ringing.........................................................................7-7
Day 1 Ring...................................................................................7-8
Day 2...

DXP Correspondence Manual
Chapter Con tents
7.39 Copy Model Programming.................................................................
7-22
Block Programming, Class of Service.......................................
7-22Block Programming, Station Features
.......................................
7-22Block Programming, Button Mapping
.......................................
7-22Chapter Seven Review Questions......................................................
7-23
Chapter Con tents 

DXP Correspondence ManualStation ProgrammingL.
7
Station Programming
7. IStation programming allows you to customize each telephone station
In traducingto fit the needs of its user. Unlike class of service programming, where
you set features for a group of stations, with station programming, you
Stationcan set the features for a single station.
Programming
I
Station Programming
1. Personal ITCM
:%XX
2. Display Name
3. Full Name
4. Class of Service:XX
5. Speed Dial Sets
:3
6. Idle Line Priority: None
7....

Station Programming
DXP Correspondence Manual7.2
Personal
Intercom
Number
7.3
Station Name
7.4
Class Of ServiceUse this programming procedure to change the station’s personal
intercom number. Also refer to section 9.1.
You can assign a display name and a full name to a station. A display
name is composed of a maximum of seven characters and shows in the
display of an LCD speakerphone as an identification aid. A full name
is composed of a maximum of 20 characters and shows in some voice
mail and open...

7.5
Speed Dial Sets
7.6
Idle Line Priority
7.7
Intercom Hunt
ListA speed dial set is a group of 10 speed dial locations. The system
allocates three speed dial sets to each telephone as a default but you
can allocate up to 10 sets to a telephone if you wish. When a
DSS/BLF console is operated as a companion to a telephone, you can
allocate speed dial sets at the companion telephone that the system
will then share with the console. The system reserves one speed dial
set for the telephone’s dial pad buttons...

Z8Use this procedure to add group intercom numbers to stations for their
Group Intercomuse. Also refer to section 7.37 to map buttons for group intercom
number selection. See section 9 for other intercom number
Accessconsiderations.
z9
Prime Line
Prime Line TypeWhen you enable this feature, the station automatically selects a line,
Programming 
1.me group, or intercom number for use when the station user takes the
station off hook.
Prime LineUse this procedure to give the station prime line. With prime...

DXP Correspondence ManualStation Programming7.10
Tone Or Voice
Signaling (Tone
First)
7.11
Call Announce
Beeps (Call
Announce Tone
Bursts)Intercom calls are either tone or voice signaled as a first choice with
the other mode available as a second choice. Use this procedure to
select the first choice in intercom signaling on a per station basis.
You can set the number of call announce tone bursts from one to five,
and you can do this for each station in the system.
/Station Programming (Page 2)
1. Default...

Station ProgrammingDXP Correspondence Manualz12
Defaulf Forward
TYPeUse this procedure to arrange the call forward default scheme for
individual stations. With this feature, the system will automatically
forward ringing calls to another station after a preset number of rings.
Since this is an automatic forwarding of the calls, the station users do
not have to take any action; however, any user-enabled call
forwarding that they take at their stations will override this automatic
call forwarding. This...