Comdial Dxp Correspondance Instructions Manual

12. At the default setting, all stations have the ability to SOHVA
all other stations; true or false?
13. How many system speed dials does the DXP provide?
14. What purpose does the DXP system clock serve?15.You cannot program the length of the DXP camp-on tone;
true or false?
16. List three of the DXP timing features and explain what they
do.17. Define system status reporting.
18. The DXP allows you to set either an IST ring frequency
offor domestic dialing orfor international
applications.
19. A...

DXP Correspondence Manual
System Programming
23.You can renumber the DXP feature codes; true or false.
24. Major 
alarm reporting is a Tl feature only; true or false?
DXP Correspondence Manual 5 
- 41 

DXP Correspondence Manual
Chapter Con tents16
Station COS ProgrammingChapter Six: Station COS Programming
. . . . ..*.......................................
6-1
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10Introducing Station COS Programming...............................................6-l
Account Codes......................................................................................
6-2Automatic Hold...................................................................................
6-2Automatic Hold On...

Chapter Con tentsDXP Correspondence Manual6.11
6.12
6.13
6.14
6.15
6.16
6.17
6.18
6.19
6.20
6.21
6.22
6.23
6.24
6.25
6.26
6.27
6.28
6.29
6.30
6.31
6.32
6.33
6.34
6.35DoNot DisturbProgramming..............................................................6-9
DoNotDisturbInhibit.................................................................6-9
DoNot DisturbOverride..............................................................6-9Exclusive...

6.36
6.37
6.38
6.39
6.40
6.41
6.42
6.43
6.44
6.45Line-To-LineTransfer(UnsupervisedConference)...........................6-20
Line-To-Line Connect Duration
................................................
6-20Voice Announce Block.......................................................................
6-20Internal IST Flash...............................................................................
6-21Forced Account Codes.......................................................................
6-22Allow...

DXP Correspondence ManualStation Class Of ServiceL
6
Station COS Programming
6.1
In traducing
Station 
COS
ProgrammingStation class of service programming allows you to assign blocks of
features to groups of stations. By enabling or disabling certain
features, you can create a “class of service” that can be assigned to any
number of stations. You can program up to 32 classes of service; class
of service one defaults with the PC Attendant in mind, while class of
Iservice 32 defaults with settings for an...

Station Class Of ServiceDXP Correspondence Manual6.2
Account Codes
6.3
Automatic HoldAfter you have enabled the account code feature for the system, have
set its parameters, and have programmed its list of account codes into
the system (Section 
10.2), use this procedure to turn the feature on for
a station class of service and make it either forced or optional.. If you
make it a forced account code, the user must enter an account code
before the system will let him or her dial the number for an...

DXP Correspondence ManualStation Class Of Service6.4
Background
Music
6.5
Call Cost Display
(Display Of Calls)~Music or other supplied audio information is available at a station
through the telephone speaker and is turned on or off by the station
user when he or she dials the appropriate codes. Use this procedure to
assign background music to stations..
The music or information source is external to the common equipment
and is customer supplied. The system will accept two music sources,
and you can use...

Station Class Of ServiceDXP Correspondence Manual6.6
Call ForwardCall Forward Of All, Personal,
Busy, or Ring-No Answer (RNA) CallsUse this procedure to give stations the ability to forward the calls that
they receive at their stations to another station for answering. This
feature allows these users to forward either all of the calls that their
stations receive or just the calls they receive on their prime line and
personal intercom number. Further, it can limit them to forwarding
only the calls that...

Call Forward, Default Forward Type
(For Busy Or Ring-No Answer Calls)Use this procedure to arrange the call forward default scheme for
individual stations. With this feature, the system will automatically
forward ringing calls to another station after a preset number of rings.
Since this is an automatic forwarding of the calls, the station users do
not have to take any action; however, any user-enabled call
forwarding overrides this automatic call forwarding.
This procedure determines answers for the...