Comdial Dsu II Digital Telephone System Instructions Manual

3.12 Direct Inward Station Dialing (DISD)
The DISD feature allows an external party to call an intercom station directly without assistance by the
attendant. The system must receive the DISD call on a line that you have programmed to allow this
feature. You can program any line to be a DISD line for both the normal mode of operation and the night
transfer (of ringing) mode of operation.
You can program the number of rings that the system allows on a DISD line. If you set a large number of
rings, stations...

3.12.2 Inhibiting DISD Digit Dialing
Description:You can prevent callers from dialing on the DISD line when the system is in the night
transfer (of ringing) mode of operation.
To Program:1. Dial17.“SYSTEM FEATURES”
2. Dial09.“DISD DIALING XX”
3. PressA1to toggle between enable and disable (LED On = Enable).
—OR—
Dial1to Enable (A1 LED is on)“DISD DIALING ON”
Dial2to Disable.“DISD DIALING OFF”
4. PressSSfor configuration mode.
To change setting, repeat procedure and make different selection.
3.12.3 DISD...

3.12.4 DISD Incoming Rings
Description:The number of rings that occur on a DISD line before it is answered is programmable.
Setting a large number of rings allows time for a call to be serviced in a regular manner
by stations that have line appearance for the DISD line if such action is desired.
To Program:1. Dial45.“DISD RINGS”
2. Press program button to choose operating mode
—Dial1or pressA1= normal mode“DISD RINGS DAY X”
—Dial2or pressA2= night transfer (of ringing) mode.“DISD RINGS NITE X”
3. Select...

3.13 Data Printer Service
When you connect a data printer to the system, the system automatically prints the station message detail
record (SMDR) for the entire system without any programming or user intervention.
You call also command the data printer to print partial or complete printouts of the configuration data for
the system. While you are using the printer to print the configuration data or SMDA information, the
system temporarily halts the SMDR printout although it continues to collect the SMDR...

3.14 Voice Mail Interface
The digital telephone system supports the use of a voice mail system connected to the common
equipment’s station ports through the JM008 expansion module or the ATI-D analog terminal interface
device. The JM008 is an industry-standard telephone station module that supplies eight IST ports. The
ATI-D is a multipurposeon-premiseaccessory that has dual circuits to allow a 2-port system to interface
to two digital station ports. Two ATI-D devices are needed to interface 4-port...

3.14.1 Voice Mail Port
Assign The Voice Mail Port
Description:When you connect the voice mail equipment to a common equipment station port either
through an IST interface or directly to the port (depending upon the type of voice mail
equipment you are using), you must use thisassign voice mail portfeature to enable the
station port as a voice mail port. This feature only applies to voice mail systems
supported by Comdial’s proprietary DTMF integration. Once you perform this step, the
station port will...

Assign Ringing For Automatic Attendant Operation
Description:With its automatic attendant feature, the voice mail system automatically answers any
line that is ringing at a voice mail port. As a default, the system automatically enables
ringing line preference for any port that you have identified as a voice mail port. You
must choose a ringing assignment for the lines that you have assigned to the voice mail
ports before the voice mail system can provide the automatic attendant feature.
To Program:1....

To assign voice mail ports to a hunt group,
1. Dial53.“STATION FEATURES”
2. Dial18.“HUNT LINK”
3. Select first voice mail port
—Station 12–57 = Dial12–57or pressC12–C57.
4. Select second voice mail port
—Station 12–57 = Dial12–57or pressC12–C57.
5. DialSfor another link
(Example: 16 to 17, 17 to 18, and 18 to 16)
—OR—
dialSSfor next station feature
—OR—
dialSSSfor configuration mode.
Disable link by repeating procedure and linking station to itself.
To enable call forward of RNA calls and busy calls and...

3.14.2 Automatic Transfer of Voice Mail
Description:Use this programming feature to arrange for an immediate connection of a transferred
line from voice mail to a digital station port.
To Program:1. Dial25.“V MAIL AUTO XFER”
2. PressA1to toggle between enable and disable (LED On = Enable)
—OR—
dial1to enable (A1 LED is on)
dial2to disable.
3. DialSfor configuration mode.
To change setting, repeat procedure and make different selection.
NOTE: Do not turn on this feature if you turn on the screen and/or...

3.14.4 Voice Mail Transfer on Busy
Description:Normally, the auto-attendant routes calls from a busy station to that station’s voice mail
box. Alternately, you can arrange for the system to alert the busy station when the voice
mail system is attempting to transfer a call. You may need to program the attendant
station to have this option.
To Program:1. Dial53.“STATION FEATURES”.
2. Dial31.“VMAIL XFR ON BSY”.
3. Select station ports to be programmed (LED On = Selected).
—Station ports 10–57: Dial10– 57or...