Comdial Dsu II Digital Telephone System Instructions Manual

3.7.4 Automatic Hold
You can give station users the ability to place an existing line or intercom call on hold when she or he
presses another line button.
Automatic Hold With Line Calls
Description:When you enable this feature, the telephone user can automatically place an existing line
call on hold when she or he presses another line button to answer a second call.
To Program:1. Dial53.“STATION FEATURES”
2. Dial11.“AUTO HOLD ”
3. Select station ports (LED On = Feature Assigned).
—Station 10–57:...

3.7.5 Automatic Privacy
You can make a line private or non-private. In the private mode, a station has exclusive use of a line
during a call. You can arrange for individual stations to automatically release privacy while on private
lines.
Make A Line Private Or Non-Private
Description:Use this feature to make a particular line private or non-private.
To Program:1. Dial40.“PRIVACY RELEASE ”
2. Select line ports to be non-private (LED On = Non Private Port)
—Line port 1–14 = Dial01–14or PressA1–A14
—Line...

3.7.6 Call Forward On Busy/Ring–No Answer
The system can automatically forward busy and/or ring-no answer (RNA) calls to a new station. The
system sends these calls to any idle station associated either by intercom hunt group or by department
with the called station. Use this feature to arrange for calls to cycle rapidly through such associated
stations by testing each one in turn with several rings.
Call Forwarding Of RNA Calls
Description:Enable call forward of RNA calls for individual stations using...

Set Tone First Intercom Signaling
Description:You must set the first choice intercom signaling method to tone first to ensure forwarding
of calls that encounter a busy signal or a ring with no answer.
To Program:1. Dial16.“XXXXX ANN. FIRST”
2. PressA1to toggle from Voice To Tone (LED Off = Tone)
— OR—
dial2for Tone First.“TONE ANN. FIRST”
3. DialSfor configuration mode.
To change setting, repeat procedure and make opposite selection.
Intercom Hunt Group
Description:You can link stations together to form...

3.7.7 Call Origination Denied
Description:You can deny users of selected stations the ability to originate calls on specified lines.
This feature does not prevent the user from answering incoming calls on these lines.
To Program:1. Dial54.“STA/LINE CONFIG.”
2. Dial6.“ORIGINATION DENY”
3. Select line ports (LED On = Selected Ports).
—Line port 1–14 = Dial01–14or pressA1–A14
—Line port 15, 16 = Dial15,16or pressB1,B2
—Line port 17–24 = Dial17–24or pressHOLDthen pressA1–A8.
4. Dial#when all line ports are...

3.7.9 Data Security Port
Description:While port is active on a call, this feature prevents any incoming tones associated with
other system features from interrupting the call.
To Program:1. Dial53.“STATION FEATURES”
2. Dial26.“DATA SECURE PORT”
3. Select station port (LED On = Feature Assigned)
—Station 10– 57: Dial10–57or pressC10–C57.
4. DialSfor next station feature
—OR—
dialSSfor configuration mode.
To clear current setting, repeat procedure.
3.7.10 Dual Console Feature
Description:The dual console...

3.7.11 Executive Override
Description:You can provide selected stations with busy override. This feature allows the station to
override a busy condition at a station, sound a warning tone, and gain access to the
existing conversation.
To Program:1. Dial53. “STATION FEATURES”
2. Dial02.“EXEC. OVERRIDE ”
3. Select station ports (LED On = Feature Assigned)
—Station 10–57: Dial10–57or pressC10–C57.
4. DialSfor next station feature
—OR—
DialSSfor configuration mode.
To clear current setting, repeat...

3.7.12 Flexible Ringing Assignments
You can enable different ringing assignments for individual lines and stations.
Direct/Delayed Ringing
Description:You must program ringing assignments on a per station/per line basis. You can control
ringing for every line that has appearance at a station assigning immediate, or direct,
ringing to some lines and delayed ringing to others.
NOTE:Do not program direct ringing for lines that you assign to the direct
department calling feature.
To Program:1....

Night Transfer (Of Ringing)—Line/Station Assignments
Description:You or the system attendant can place the system into the night transfer (of ringing) mode
of operation. While in this mode of operation, the system will activate special line/station
ringing assignments. Use this procedure to program these assignments.
To Program:1. Dial54.“STA/LINE CONFIG”
2. Dial3.“NIGHT RING”
3. Select line ports for night ringing (LED On = Selected Ports)
—Line port 1–14 = Dial01–14or pressA1–A14
—Line port 15, 16 =...

Delayed Ringing Times
Description:You assign delayed ringing to stations for specific lines, you can also set the time length
of the delay.
To Program:1. Dial17.“SYSTEM FEATURES ”
2. Dial05.“DELAY RING XX”
3. Select delay time (LED On = Selected Time)
—Dial1or pressA1= 6 seconds“DELAY RING 6”
—Dial2or pressA2= 12 seconds“DELAY RING 12”
—Dial3or pressA3= 18 seconds“DELAY RING 18”
—Dial4or pressA4= 24 seconds“DELAY RING 24”
—Dial5or pressA5= 30 seconds“DELAY RING 30”
—Dial6or pressA8= 36 seconds“DELAY RING...