Comdial Digital Telephone System Programming Manual

system C.O.S. RogrammillgZMZ66-094
2.17 Specialized Route Accessl
To enter the Specialized Routed Access menu, press 16 on System C.O.Sprogramming
2. 
I7.1Specialized Route Access FeatureDescription:
This feature allows the system to select a line group based on the digits the user has dialed; The system
then selects the best route for that call.
To 
Program:1.Press 1 on Specialized Routed Access menu and RETURN
2.Press 1 to Enable feature, 0 to Disable
2.17.2posi n Line Group Number
%&e Code Table...

ZMZ66-094system C.O.S. Frogrommi?lg
2.17.5Overjlow Line Group
Description:You can assign an overflow line group that the system can use to route calls over when no lines are free in
the line group assigned to the matching entry. If you haven’t assigned an overflow line group, the system
will ring busy if no lines are free.
ToProgram:1.Press 5 on Specialized Routed Access menu and RETURN
2.Enter SRA. Ovefflow Line Croup (O-4,0 = none)
2.17.4Assign Area Code
Description:The area code table matches a dialed...

System C.O.S. ProgrammingZMZ66-094
2.18 Software Version Numberl
To display the Somare Version of your program, press 17 on the System Class of Service
menu.
-2% 

Line C.O.S. ProgrammingProgramming The Lines
3.1Using This Chapter
Chapter Three deals only with the programming of the lines, which means that you are setting the parameters that
will only be true for the individual line programmed,If you are unsure whether or not you are programming the
correct function, check the features chapter in MM-107 for a full definition of the features.You should make a
record of all your programming decisions -it will help you keep track of what you have done and will help...

Line C.O.S. ProgrammingZMZ66-094
3.4Line Dialing ModeDescription:
You must select either tone or pulse dial for each line.
ToProgram:1.Press 3 on Line menu and RETURN
2.Press 1 for Pulse Dial and RETURN
3.Press 2 for Tone Dial and RETURN
4.Press 3 to return to Previous menu
3.5Line Privacy Release
Descliption:
ToProgram:3.6 
TolJRestriction
Table Assignments
A particular line can be programmed with privacy release, meaning that one other station can join that
privacy release line at any time during a...

Line C.O.S. Programming
3.8Set Up a Line
Description:You can take the parameters from one line and assign them to other lines.
To Program:1.Press 7 on Line menu and RETURN
2.Enter model line number and RETURN
3.Enter program line number and RETURN
4.Press RETURN to go back to Previous menu3.9 Assign Name
Description:You can name lines as to their function. Names such as WATS or CO, for example, appearing on an LCD
speakerphone display make it easier for the station user to identify a line.A line name can...

Line C.O.S. ProgrammingZMZ66-094
3.12 Voice Mail Line ID.
NOTE: See index for Depamnent-level programming steps.
Description:When you have included a voice mail system with the digital telephone system, assign voice mail
identification numbers to the lines. A voice mail ID number can contain up to a maximum of six digits.A
voice mail ID number allows the voice mail equipment to identify which line it is answering, regardless of
the voice mail port that answered it.
ToProgram:1.Press 11 on Line menu and...

StWion C.O.S. ProgramrungProgramming The Stations
4.1Using This Chapter
Chapter Four deals only with the programming of the stations, which means that you are setting the parameters char
will only be true for rhe individual station programmed.If you are unsure whether or not you are programming the
correct function, check 
the features chapter of IMI66-107 for a full definition of the features.You should make a
record of all your programming decisions-it will help you keep track of what you have done and...

Station C.O.S. ProgrammingIMZ66-094
4.4Assign Station to A Department
Description:You can group stations into departments that may share similar lines or features.
To Program:1.Press 3 on Station menu and RETURN
2.Press 1 to Assign Station to a Department and RETURN
3.Press 2 to Assign Station to a Department Overflow Position and RETURN
4.Press 3 to Remove a Station and RETURN
5.Press 4 to return to previous menu
4.5Assign Station to SOHVA
Description:llis feature arranges station ports to originate and...

Station C.O.S. Programming
4.6.3Line Access Deny
DescriptionYou can deny access to certain lines at certain stations.
ToProgram:1.Press 3 on Line / Intercom menu to Deny Access and RETURN
2.Press 1 to Enable Line Access Deny and RETURN
3.Press 2 to Disable line Access Deny and RETURN
4.Press 3 to return to previous menu4.6.4 Line 
Originute Deny
DescriptionYou can program a station to be able to only answer a line and not be able to call out on it.
ToProgram:1.Press 4 on Line / Intercom menu to Originate...