Comdial Digital Telephone System Programming Manual

stution C.O.S. RogmmmingZMZ66-0944.7 Ringing Assignment
l
To enter Ringing Assignment menu, press 6 on Station menu.
4.7.1Personal Ringing tone
DescriptionYou can program stations to ring in one of six distinctive tones.
ToProgram:1.Press 1 on Ringing Assignment menu and RETURN
2.Press1forRingingtone1andREI’URN
3.Press2forRingingtone2andRETURN
4.Press3forRingingtone3andRETURN
5.Press4forRingingtone4andRJTLJRN
6.Press5forRingingtone5andREI’UlW
7.Press6forRingingtone
6andRETURN
8.Press 7 to return to...

Station C.O.S. Rogramming4.8 Button Mapping
NOTE: For Button Locatbns and Function Attributes see page 51-5.5 of this manual
Desaiption:You can assign (map) every programmable button on every electronic telephone. For more information on
button mapping see 
Ih4I66-107.
To Program:1.Press 7 on Station menu and RETURN2. Enter 
StationNumber
3.Select desired button (Press RETURN until button appears)
4.Enter desired attribute and RETURN
5.Enter next station or press CTRL C to return to main menu
4.9Toll...

Station C.O.S. RogmmmingIM.I66-0944.11 
EEUZSI Feature
l
To enter the Miscelluneous Feature Programming menu, press 10 on the Station Class of
Service menu.
Description:All of the features on the Miscellaneous Feature Programming menu are toggleon toggl-ff, or
Enable 
- Disable, except for “All Call Zone Paging,” which has the following sub menu
ToProgram:1. Press8andRETURN
2.Press 1 to clear Assignments and RETURN
3.Press 2 to Assign Receive Zoneand RETURN
4.Press 3 to Assign Originate Zone
5.Press 4 to...

IMI66-094Shtion C.O.S. Programming4.12 Speakerphone 
Coefficientsl
To enter the Speakerphone CoefJicients menu, press 11 on the Station
Claw of Service menu.
Description:CAUTION: This is a technical servicesfunction only; it is not recommended for$eld service use.
To Program:1.Press 1 to Read Speakerphone Coefficients
2.Press 2 to Modify Speakerphone Coefficients
3.Press 3 to Save Speakerphone Coeffkients
4.Press 4 to return to previous menu.
-39- 

Toll Resbictiom AdministrationToll Restriction Table Administration
NOTE:The functions on this menu only create and clear toll tables. For complete information on toll tiles see
the toll table module in this publication (page 28).l
To enter the Toll Restnktion Table Administration menu, press 4 on the Main menu.
5.1Build / Modify an Allow Table
Description:An allow table establishes those numbers that will be allowed, as exceptions against deny tables, for
dialing, l-800, for example, when 1 is denied....

Toll Reshdiotts5.4 Toll 
Restriction-
Programming steps
This module explains the many different steps involved in programming for Toll Restrictions. It also serves as an
excellent example of the occasional need to move from one menu to another in order to completely program a
particular function.(If you are unsure about whether you have done all of the necessary programming for a
particular function, check the index-in the back of this book -for further references to that function.)54.1 Create The Table...

Zn$wmationZMZ66-094Information
l
To enter the Inform&on menu, press 5 on the Main menu.
NOTE:The information menu provides e@anatiom about the key functions of your VDT (see the Programming
Procedure section of this manual, page 1).
Description:The following is a list of the items found on the help menu.special 
characten
d - prints current menu.
Backspace, delete, 
rubout - deletes previous character
from input line.
Control D
- deletes current input line
Control R 
- prints current input line
Control...

ZMZ66-094IISystem Records
Programming Records
7..1 S ~temProgramming-
n&scellaneous Features
DataBaudRateI A ) B
110 Baud
150Baud
300Baud
600Baud
1200Baud
2400Baud
4800Baud
9600 Baud
19200 Baud
7Data / 2 StopBit
8Data/ 1 StopBit
Default = 300 Baud 7 Data /2 Stop Bits
Tone / Voice SignalingEnable Disable
IDefault = Tone
Automatic Set Relocation Enable Disable
Default = DisableSystem Alarm Reporting Enable Disable
Default = Disable
Tandem Attendant
Default = DisableEnable Disable
Exclusive Hold
Dqfault =...

System RecordsIhfI66-094
IDefault: I = BACK AT, 2 = CAL5
23487398I
24497499I
25
5075. 

System Records7.2 S stem Programming-
?
imi.n~FeaturesRecall/Flash
Time
Default = 2 seconals
.08set.30setSOsetA0set.75set.88set1.0set1.5set2.0set2.5.~~Pause Tie
D@ault = I second
-5 setl.Osec 1.5 set 2.osec 3.osec 5.osec -7.5 set 1osec 15 set 2Osec
TimedHoldRecall Tie 30~ 6Osec 9Osec 12Osec 180s~ 240~ 3OOsec 360s~ 420s~ Never.
Default = 60 secona!s
Unanswered CallTransfer Recall Time1Osec 20s~ 25s~ 3Osec 45sec 6Osec 9Osec 12Osec 18Osec 24Osec
Default = 20 secona30 For Stations
Unanswered CallTransfer...