Comdial Digital Telephone System Programming Manual

systtm C.O.S. RogmnlmingIMZ66-094
2.2Defaulting The Systeml
To Enter System Defaults menu, Press 1 on System C.O.S. menu.
2.2.1Default All System Data
Description:Returns all system C.O.S. values to default except for baud rate.
ToProgram:1.Press 1 on System Defaults menu and RETURN
2.Press Y to confirm and RETURN
3.Press CTRL C to return to main menu or RETURNto go back to System C.O.S. menu.
2.2.2Default All Line Data
Description:Returns all lines to default.
ToProgram:1.Press 2 on System Defaults menu...

System C.O.S. Rogramming
2.2.5Puke Dial on All LinesDescription:
Makes all lines pulse dialing, not DTMF.
ToProgram:1.Press 5 on System Defaults menu and RETURN
2.Ress Y to confirm
3.Press CTRL C to return to main menu orRETURNto go back to System C.O.S. menu.
2.2.6Tone Dial on AU Lines
Description:Makes all lines tone dial, DTMF.To Program:
1.Press 6 on System Defaults menu and RETURN
2.Press Y to wniilm3. 
RessCTRLCtoretumtomainmenuorFETURNto go back to System C.O.S. menu.
2.2.7Default Bu#on Mapping on...

system C.O.S. Programming2.3 System Options
l
To Enter System Options menu, Press 2 on System C.O.S. menu.
2.3.1Voice 
/ Tone First on Intercom
Description:Selects either voice or tone as standard intercom signrhg method.
ToProgram:1.Press 1 on System Options menu and RETURN
2Press 1 for Voice First
-OR-
Press 2 for Tone First and RETURN
3.Press CTRL C to return to main menu, orRETURN to go back to previous menu.
2.3.2Station Message Desk
Description:Assigns or clears one station port as the central...

systm C.O.S. Rogramming
2.3.4Assign Pilot Number to Department
NOTE: See index for all department-level programming steps.
Description:Gives an entire department one extension number.
ToProgram:1.Press 4 on System Options menu and RETURN
2.Enter department number and RETURN
3.Enter PILOT number and RETURN
3.Press CTRL C to return to main menu, or RJZURNto go back to previous menu.
2.3.5 Music on Hold
Description:Enables or Disables the music on hold feature.
To Program:1.Press 5 on System options menu...

System C.O.S. Rogmm3ning2.3.8 Tandem AttendantliUI66-094
Description:Allows one or both attendants to receive timed hold recall and recall from transfer.
ToProgram:1.Press 8 on System Options menu and RETURN
2.Press 1 to Enable Tandem Attendants,
-OR-
Press 0 to Disable Tandem Attendants
3.Press CTRL C to return to main menu, or RETURNto go back to previous menu.
2.3.9Voice Mail Auto Transfer
Description:Enables immediate line transfer when voice mail unit is included with system.
ToProgram:1.Press 9 on...

IMI66-094
2.3.12 P.A.. Options
System C.O.S. Rogramming
Demiptioll:Enables all PA options
ToProgram: 1.
2.
3.
4.
5.
6.
7.
Press 12 on System Options menu and RETURN
Press 1 to Enable Direct Ringing and enter line number
-OR-
Press 2 to Disable Direct Ringing and enter line number
Press 3 to Enable Delayed Ringing and enter line number
-OR-
Press 4 to Disable Delayed Ringing and enter line number
Press 5 to Enable Night Ringing and enter line number
-OR-
Press 6 to disable Night Ringing and enter line...

System C.O.S. Programming2.4 System TimingIMI6094l
To enter System Timing Menu, Press 3 on System C.O.S. menu.
2.4.1Recall 
/ Tap Time
Description:The system can generate either a line disconnect (Recall) or a shorter disconnect (Tap). Tap is used as a
signaling device for
CENTREX / PBX and is not a long enough signal to disconnect from the system
To Program:1.Press 1 on System Timing menu and RETURN
2.Press l-10 to select appropriate Recall / Tap time and RETURN
3. Press11toR.RTuRNto previous menu.2.4.2...

ZMZ66-094System C.O.S. Programming2.4.5Department Transfer Recall Time
NOTE:See index for Department-level programming steps.
Description:A call that is transferred to a department and remains unanswered after a set length of time will return to the
transferring station for answering.To Program:
1.Press 5 on System Timing menu and RETURN
2.Press l-10 to select appropriate Department Transfer Recall time and RETURN3. Press 11 
toREzVRNto previous menu2.4.6 Call Park Recall Time
Description:A call tbat...

System C.O.S. Frogramming
2.5Load / Save C.O.S. Data
ZMZ6tSO94l
To enter Load/Save C.O.S. Data menu, Press 4 on system C.O.S. menu
NOTE:You must be using a computer to use these functions.These commandr are specific to PROCOMM-
(Datastorm Technologies).Remember, Xnodem protocol requires 8 bit, 1 stop bit, in order to function.2.51
Transmit C.O.S. Datu Using Xmodem
Description:The COS data, as programmed in the DSU, can be automatically down-loaded to the computer file.
ToProgram:1.Press 1 on Load / Save...

ziuz66-094System C.O.S. Programming2.53
Transmit Auto Dial and Speed Dial
Numbers Using Xmodem
Description:The autodial and speed dial numbers, as programmed in the DSU, can automatically be down-loaded to the
computer file.
ToProgram:1.Press-3 onLoad/SaveC.O.S. Datamenu andRETURN
2.Press PAGE DOWN
3.Press 1 to choose Xmodem protocol
4.Type file name for down-load Speed Dial and Auto Dial data to save into5. 
PressRETuRN
2.5.4Receive Auto Dial and Speed Dial
Numbers Using Xmodem
Description:The autodial...