Comdial Digital Telephone System Programming Manual

system C.O.S. Rogramming
2.6Serial Communication Parametersl
To enter Serial Communication Parameters menu, press 5 on System
Class of Service menu.Description:
Serial Communication Parameters for Channel A and B
NOTE: Zf you change either the baud rate or data and stop bits, you must also change them on the VDT.
ToProgram:1.Press l-9 to set appropriate baud rate and RETURN
2.Press 10 or 11 for appropriate data and stop bits and RJZTURN
3.Press 12 to switch to other channel and REI’URN
4.Repeat steps one...

zluz66-094system C.O.S. Rogra?nJning2.7
C.O.S. Data Printoutl
To enter C.O.S. Data Printout menu, press 4 on System Class of Service menu.Description:
You can obtain a printout of your programming decisions.To Program: 1.
Press -1 to.pxint all C.O.S. data and RETtlRN
2.Press 2 to print system C.O.S. data and FUXURN
3.Press 3 to print all line C.O.S. data and RETURN
4.Press 4 to print selected line C.O.S. data and RJZTURN
5.Press 5 to print all station C.O.S. data and RETURN
6.Press 6 to print selected...

System C.O.S. ProgrammingMI660942.9 
SMDA Programming
l
To enter SMDA Programming menu, press 8 on System Class of Service menu.
2.9.1Costing Band 
Assignmenti
Description:Band assignments determine the priority levels of call costing, from area codes, to zone codes, to off&
COdeS.
ToProgram:1.Press 1 on SMDA Programming menu and RETURN
2.Press 1 to Assign Office Codes to Bands and RETURN3. 
Press 2toAssignAreaCodestoBandsandRETURN
4.Press 3 to Assign Area Codes and Offke Codes to Zones and RETURN...

IMI66-094System C.O.S.Rogmnzming2.9.6 Account Codes
Description:The digital telephone system uses account codes to identify calls by category or by any other desired
grouping. Account 
cc&s can be verified or not verified by the system-with verified account codes, the
system compares the first three digits of the entered account code with the programmed account code
numbers. If no match is found and the account code is optional, the system sounds an error tone through
the telephone but does not prevent...

System C.O.S. ProgrammingIMI66.0942.9.7 Call Cost Table
NOTE: For LCD Costing, see page 25.
Description:The system compares local and long distance calls that do not match entries in any exception or banding
tables with entries made in call costing table. It then costs those calls accordingly.
To Program:1.Press 7 on SMDA Programming menu and RETURN
2.Enter Call Cost Table number and RETURN
3.Press 1 to enter Match Digits and RETURN
4.Press 2toSetTier 1 timeandRETURN
5.Press 3 to Set Tier 1 rate and...

IMZ66-094System C.O.S. Rogmmming
2.9.IO SMDA Delete By AttendantDescription:
The attendant can delete SMDA records when they exceed storage capacity.
ToProgram:1.Press 10 on SMDA Programming menu and RIXURN
2.Press 1 to enable, or 0 to disable and RETURN
2.9.11 SMDA ReportsDescription:
These reports are printed immediately
NOTE: For further dejinitions of SMDA reportfirnctions see the features chapter of IMI66-107.
ToProgram:1. Press 11 on SMDA Programming menu and RJZTURN
2. 
Ress 1 for Selected Station...

System C.O.S. Programming
2.11 Logcal / Physical
gnments 
-stations
lTo enter the Logical/Physical Assignments -Stations menu, Press 10 on the System
Class of Service menu.
Description:You can assign all of the programmingattributes of one station to a different port without reassigning all of
the features separately.
To F’rogram:1.Press 1 to Display Current Assignments
2.Press 2 to Assign Station to Port
3.Press 3 to return to previous menu2.12 
Lo$ie~~ysical~
- Lmesl
To enter the Logical/Physical...

zMz66-094System C.O.S. Programming
2.14 Feature Inhibit Programmingl
To enter Feature Inhibit Programming menu, press 13 on the System
Clam of Service menu.
Description:All of the functions on the Feature Inhibit Programming Menu disable the feature.
ToProgram:Press the number of the feature you wish to disable.
1.Line Croup 1
2.Line Croup 2
3.LineGroup 3
4.LineGroup
5.Zone Paging 1
6Zone Paging 2
7Zone Paging 3
8.All Call
9. Meet Me Page
10.Night Transfer
11.Background Music
12. Voice Announce Block...

Sys&m C.O.S. RogrammingIMI660942.16 LCD Messages
l
To enter the L.CD Messages menu, Press 15 on the System Class of Service menu
2.16.1
Displuy Current MessagesDescription:
Menu will display LCD messages.To Program:
1.Press 1 on LCD Messages menu and Return
2.Press RETURN to to go back to System C.O.S. menu
2.16.2Enter A Custom Message
Desaiplion:You can create a custom message that will display on a calling station’s LCD, ” AM SLEEPING,” for
example.
To 
Program:1.Press 2 on LCD Messages menu and...

ZMZ66-094
2.16.4
Enter the ‘XXLL.” Message
Description:Will display a “call” message when a station receives LCD message.
ToF’rogram:1.Press 4 on LCD Messages menu and RETURN
2.Press message number and EETUEZN
3.Press RETURN to to go back to System C.O.S. menu
2.16.5
Enter an LCD Message
Description:Will clear an LCD message.
ToProgram:1.Press 5 on LCD Messages menu and RETURN
2.Press message number and RETURN
3.Press RETURN to to go back to System C.O.S. menu
System C.O.S. Z+ogramming
-25-