Cisco D9854i Manual
Here you can view all the pages of manual Cisco D9854i Manual. The Cisco manuals for TV Receiver are available online for free. You can easily download all the documents as PDF.
Page 301
L-Band Input and Processing 78-4021470-01 Rev J 277 LNB Power and Control Parameter Specification Voltage (RF1to RF3, RF4 does not have an LNB supply) 13 V Vertical/circular right, 18 V Horizontal/circular left Off Current 350 mA maximum LNB Alarms: No load - 6 mA Overload - 360 mA minimum DVB-S/DVB-S2 DVB-S/DVB-S2 Satellite Receiver Parameter Specification L-Band Input Number of Inputs 4 (one active at a time) Input Connector Type F-type, female, 75 ohms Input Impedance...
Page 302
Appendix A Technical Specifications 278 78-4021470-01 Rev J Parameter Specification Eb/No (C/N) Ratio See DVB-S2 Satellite Receiver Input, DVB-S Eb/No (C/N) Ratio Table DVB-S2 Modulation (EN 302 307) Modulation QPSK, 8PSK Pilots On/Off Pilots On QPSK LDPC FEC Rates 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 8PSK LDPC FEC Rates 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 LDPC FEC Frame Length Normal Symbol Rate Range 1 to 30 Ms/s Maximum Channel Bit Rate 90 Mb/s Maximum User Bit Rate 78.55 Mb/s DVB-S...
Page 303
L-Band Input and Processing 78-4021470-01 Rev J 279 Mode Simulated Es/No (dB) for FEC Frame length = 64,800 Typical Performance (dB) in Linear Channel and IF Loop configuration QPSK 4/5 4.68 4.8 QPSK 5/6 5.18 5.3 QPSK 8/9 6.20 6.4 QPSK 9/10 6.42 6.6 8PSK 3/5 5.50 5.8 8PSK 2/3 6.62 6.8 8PSK 3/4 7.91 8.1 8PSK 5/6 9.35 9.6 8PSK 8/9 10.69 10.9 8PSK 9/10 10.98 11.3
Page 304
Appendix A Technical Specifications 280 78-4021470-01 Rev J Video Inputs/Outputs and Processing General Parameter Specification System MPEG-2/DVB Compatible EN 300 421, EN 300 468 Video Outputs Analog SD Video Output Item Test Signal Specification CVBS1 Specification CVBS2 Number of Channels One SD source program One SD source program Video Decompression MPEG-2 4:2:0 MPEG-2 4:2:0 Output Impedance 75 Ω 75 Ω 525 Line Bar level NTC-7 comp 700 mV ± 7 mV (± 1%) 700 mV ± 35 mV (±...
Page 305
Video Inputs/Outputs and Processing 78-4021470-01 Rev J 281 Item Test Signal Specification CVBS1 Specification CVBS2 Frequency Response FCC multi-burst 0.5 MHz, 0 dB 1.25 MHz, 0 dB ± 0.2 dB 2 MHz, 0 dB ± 0.2 dB 3 MHz, 0 dB ± 0.3 dB 3.58 MHz, 0 dB ± 0.3 dB 4.1 MHz, 0 dB ± 0.3 dB 0.5 MHz, 0 dB 1.25 MHz, 0 dB ± 0.2 dB 2 MHz, 0 dB ± 0.2 dB 3 MHz, 0 dB ± 0.3 dB 3.58 MHz, 0 dB ± 0.3 dB 4.1 MHz, 0 dB ± 0.3 dB Differential Gain NTC-7 comp < 3.0% < 3.0% Differential Phase NTC-7 comp <...
Page 306
Appendix A Technical Specifications 282 78-4021470-01 Rev J Item Test Signal Specification CVBS1 Specification CVBS2 Frequency Response VITS18 0.5 MHz, 0 dB 1 MHz, 0 dB ± 0.2 dB 2 MHz, 0 dB ± 0.3 dB 4 MHz, 0 dB ± 0.3 dB 4.8 MHz, +0 dB, -0.5 dB 0.5 MHz, 0 dB 1 MHz, 0 dB ± 0.2 dB 2 MHz, 0 dB ± 0.2 dB 4 MHz, 0 dB ± 0.3 dB 4.8 MHz, +0 dB, -0.5 dB Differential Gain VITS330 < 3.0% < 3.0% Differential Phase VITS330 < 3° < 3° Luminance Non-linearity VITS17 < 5% < 5% Weighted Signal...
Page 307
Video Inputs/Outputs and Processing 78-4021470-01 Rev J 283 Linearity 5-step 3% 3% Interchannel Delay 100% Color Bars 2 ns 2 ns DC Offset ± 50 mV ± 50 mV Return Loss DC to 30 MHz, -20 dB DC to 30 MHz, -20 dB Aspect Ratio Item Specification Aspect Ratio Conversions for Down- Conversion Aspect Ratio Conversions for SD Programs 4:3 16:9 4:3 16:9 16:9 Letterbox 14:9 Letterbox Center Center Cutout 16:9 Letterbox 14:9 Letterbox Center Cutout Scale to 16:9 Embedded Data in SDI...
Page 308
Appendix A Technical Specifications 284 78-4021470-01 Rev J Audio Outputs Analog Audio Outputs Item Specification Number of Channels 2 stereo pairs/4 mono channels, 5.1 channel downmix Audio decompression: MPEG or Dolby Digital. HE-AAC single stereo pair or Dolby Digital Plus single stereo pair available as future software download. Frequency Response ±0.5 dB, 20 Hz to 20 kHz (ref., 100 kilohms) Total Harmonic Distortion < 0.3% at 1 kHz (ref. 100 kilohms) Dynamic Range 85 dB (CCIR/Arm...
Page 309
Transport Stream Outputs 78-4021470-01 Rev J 285 Transport Stream Outputs ASI Output Item Specification Number of outputs 1 Type of connector 75 ohms BNC Output impedance 75 ohms according to EN 50083-9 Data amplitude 800 mV peak-peak ± 10% according to EN 50083- 9 Return loss >17 dB, 27 to 270 MHz Transport stream bit rate 1 to 120 Mbit/s ± 100 ppm ASI bit rate 200 Mbit/s ± 100 ppm Transport stream formats According to EN 50083-9 188 bytes structure 204 bytes without Reed Solomon...
Page 310
Appendix A Technical Specifications 286 78-4021470-01 Rev J Item Specification Type of connector RJ-45, 100/1000 BASE-T Output modes IPv4 datagrams IP Addressing Multicast TS Input up to 5 PIDs Bit Rate up to 10 Mbps (for 1500 byte packets)
All Cisco manuals