Cisco D9854i Manual
Here you can view all the pages of manual Cisco D9854i Manual. The Cisco manuals for TV Receiver are available online for free. You can easily download all the documents as PDF.
Page 321
Factory Default Settings 78-4021470-01 Rev J 297 DPM - ASI Parameter Default PMT 8192 Act Drop OutCh 0 PMT 8191 Map Mode SVC ID & PID Duplic Mode Pkt Copy Unref Drop PSI Options Drop All PSI Rate SA Std Service ID Valid Ch PAT Pass CAT Pass PMT Pass TSDT Pass NIT Pass NITO Pass SDT Pass SDTO Pass BAT Pass EIT Pass TDT Pass RST Pass TOT Pass DIT Pass SIT Pass ECM Pass EMM Pass DRT Pass
Page 322
Appendix B Default Settings 298 78-4021470-01 Rev J Parameter Default CDT Pass Noise Cutoff Parameter Default Trnsprt (DVB-S/DVB-S2 Marg) Cutoff 0.0 Trnsprt (DVB-S/DVB-S2 Marg) Restore 0.1 Audio (DVB-S/DVB-S2 Marg) Cutoff 0.0 Audio (DVB-S/DVB-S2 Marg) Restore 0.1 Muting Control Enable Import/Export (Web GUI only) Parameter Default Settings File Name file name FTP Server IP Address 192.168.0.100 FTP Port Number 21 FTP User Name user FTP Password USER
Page 323
DPM Default Settings for Different Output Modes 78-4021470-01 Rev J 299 DPM Default Settings for Different Output Modes The DPM parameters are preset to default settings for each DPM Output Mode. The default settings for particular Output modes have been preset to optimize the output when PID mapping is required. If the DPM parameters are changed to values which switch the receiver to Full DPM Control, the receiver may enter a condition where conflicts in the settings may occur, which may...
Page 324
Appendix B Default Settings 300 78-4021470-01 Rev J Output Mode No Output Passthrough Service Chans Only MAP Passthrough MAP Svc Chans Only Full DPM Control CAT Not Displayed If Descramble Mode is set to Descrambled, it is set to Regen; otherwise, it is set to Pass If Descramble Mode is set to Descrambled, it is set to Regen; otherwise, it is set to Pass If Descramble Mode is set to Descrambled, it is set to Regen; otherwise, it is set to Pass If Descramble Mode is...
Page 325
DPM Default Settings for Different Output Modes 78-4021470-01 Rev J 301 Output Mode No Output Passthrough Service Chans Only MAP Passthrough MAP Svc Chans Only Full DPM Control TDT Not Displayed Pass Pass Pass Pass Actual Value RST Not Displayed Pass Pass Pass Pass Actual Value TOT Not Displayed Pass Pass Pass Pass Actual Value DIT Not Displayed Pass Pass Pass Pass Actual Value SIT Not Displayed Pass Pass Pass Pass Actual Value ECM Not Displayed Pass Pass Pass...
Page 327
78-4021470-01 Rev J 303 C Appx auto letter Appendix C Lock Levels Introduction This appendix contains the lock levels for the D9854 Advanced Program Receiver. In This Appendix D9854 Receiver Lock Levels .............................................................. 304
Page 328
Appendix C Lock Levels 304 78-4021470-01 Rev J D9854 Receiver Lock Levels Four (4) lock levels (0, 1, 2, 3, and 4) are available for protecting your receiver and its settings against unauthorized use or modification (see the table below for full details). Level Description 0 All settings are unlocked (receiver lockout disabled) 1 All settings are unlocked except Factory Reset, Password options and receiver parameters. 2 All settings are unlocked except RF and ASI Input Tuning parameters. 3...
Page 329
D9854 Receiver Lock Levels 78-4021470-01 Rev J 305 Closed Caption Parameter Lock Level Preferred Mode 2 Subtitles Parameter Lock Level Op Mode 2 Lang Menu 2 Lang List 2 PMT Order 2 Manual Entry 2 Imitext Position 2 Foreground 2 Background 2 Download Parameter Lock Level Mode 2 DL Type 2 DL Bank 2 Command 2 Runnable Application Parameter Lock Level Index 2 Select 2 Erase 2
Page 330
Appendix C Lock Levels 306 78-4021470-01 Rev J Runnable FPGA Parameter Lock Level Index 2 Select 2 Erase 2 Audio Parameter Lock Level Audio Sel Key 2 Mode 2 AC3 Comp 2 Left 2 Right 2 PMT Source 2 PV Muting Thresholds Parameter Lock Level Transport Cutoff 2 Transport Restore 2 Audio Cutoff 2 Audio Restore 2 LDPC Muting Thresholds Parameter Lock Level Transport Cutoff 2 Transport Restore 2 Audio Cutoff 2
All Cisco manuals